AXIOMTEK GOT3187W-881-PCT User manual

GOT3187W-881-PCT
All-in-One
18.5” WXGA TFT Fanless
Multi-Touch PANEL PC
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and/or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
CAUTION
If you replace wrong batteries, it causes the danger of explosion. It is recommended by the
manufacturer that you follow the manufacturer’s instructions to only replace the same or
equivalent type of battery, and dispose of used ones.
Copyright 2014 Axiomtek Co., Ltd.
All Rights Reserved
Oct 2014, Version A1
Printed in Taiwan

iii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the GOT3187W-881-PCT Series before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden
surge of power could ruin sensitive components. Make sure the GOT3187W-881-PCT
Series is properly grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
Windows®is a trademark of Microsoft Corporation.
IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
Intel®and Pentium®are trademarks of Intel Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

iv
Table of Contents
Disclaimers.....................................................................................................ii
Safety Precautions........................................................................................iii
Chapter 1 Introduction............................................. 1
1.1 General Description............................................................................1
1.2 Specifications......................................................................................2
1.3 Dimensions and Outlines ...................................................................4
1.4 I/O Outlets............................................................................................5
1.5 Packing List.........................................................................................6
Chapter 2 Hardware and Installation ...................... 7
2.1 CFast card Installation........................................................................8
2.2 Open back cover .................................................................................9
2.3 Jumper and COM port Connector....................................................10
2.3.1 CMOS Clear Jumper (SJP2 on SBC87881) ..............................................11
2.3.2 DC Power In Connector (SCN1)............................................................... 12
2.3.3 HDMI Connector........................................................................................ 12
2.3.4 COM Serial Port Connector ...................................................................... 13
2.3.5 Ethernet Connector................................................................................... 13
2.3.6 Serial ATA Connectors............................................................................... 14
2.3.7 SIM Card Slots (SCN19)........................................................................... 14
2.3.8 CFast™ Socket ......................................................................................... 15
2.3.9 Half-Size Express Mini Card Slot (SCN13)............................................... 16
2.3.10 Full-Size Express Mini Card (w/ SIM Slot)/ mSATA(SCN14) ................... 17
2.4 Mountings: Panel / Wall / Desktop / VESA ......................................18
2.4.1 VESA/Wall-Mount...................................................................................... 18
2.4.2 Panel-mount Kit Assembly ........................................................................ 19
2.5 HDD Installation.................................................................................20
2.6 Installing CPU and PCH Thermal Pad..............................................22
2.7 DRAM Installation..............................................................................23
2.8 Wireless LAN Card Installation ........................................................24
2.9 Power Adapter Installation ...............................................................26
Chapter 3 AMI BIOS Setup Utility .......................... 27
3.1 Starting...............................................................................................27
3.2 Navigation Keys ................................................................................27

v
3.3 Main Menu..........................................................................................28
3.4 Advanced Menu.................................................................................29
3.5 Chipset Menu.....................................................................................39
3.6 Boot Menu..........................................................................................44
3.7 Security Menu....................................................................................45
3.8 Save & Exit Menu ..............................................................................46
Chapter 4 Drivers Installation................................ 49
4.1 Driver CD/DVD content.....................................................................49
4.2 Touch Screen.....................................................................................50

vi
This page is intentionally left blank.

GOT3187W-881-PCT User’s Manual
Introduction 1
Chapter 1
Introduction
This chapter contains general information and detailed specifications of the
GOT3187W-881-PCT. Chapter 1 includes the following sections:
General Description
Specifications
Dimensions and Outlets
I/O Outlets
Package List
1.1 General Description
The GOT3187W-881-PCT adopts a 18.5-inch TFT LCD and supports LGA1150 Socket 4th
generation Intel® Core™ i7/i5/i3/Celeron processor that can support Windows 7, Windows 7
Embedded, Windows 8, Windows 8 Embedded and variety applications. This fanless platform
has below abilities make it surely a robust and cost-effective solution.
Intel® Haswell H81 Platform
Support LGA1150 Socket Intel® Core™ i7/i5/i3/Celeron processors. User can choose different
processors for different applications. It also supports up to 8GB DDR3 1333/1600 MHz
memory modules. There are rich I/O, such as dual PCIe mini card slot、2.5” HDD bay、USB3.0
port、RS232/422/485、HDMI output. This platform is a power-efficient solution.
Reliable and Stable Design
The GOT3187W-881-PCT is a fanless cooling system, which makes it suitable for vibration
environments, such as the industrial machinery markets. For high capacity storage
requirement, GOT3187W-881-PCT can work under 1.2G (5 ~ 500Hz, random for CFast card)
in operation mode with a patent of anti-vibration design. The patent improves the system
reliability and sustainability.

GOT3187W-881-PCT User’s Manual
2 Introduction
18.5 Inch WXGA TFT LCD with projected capacitive multi-touch
18.5 inch WXGA TFT LCD is with 300nits higher brightness and can displays contents in HD
resolution. With projected capacitive multi-touch, users can operate more directly and friendly.
The hardness of touch glass surface is up to 7h and is better for anti-scratch purpose.
WLAN Antenna Supported (optional)
GOT3187W-881-PCT has dual PCIe Mini Card slots for optional add-ons such as mSATA
storage、wireless LAN card for 802.11 b/g/n connections or 3G/GPRS applications, and more.
It also provides an optional fixed rotational WLAN antenna (optional) for wireless network
connection.
1.2 Specifications
Main CPU Board
CPU
Support LGA1150 Socket Intel® Core™ i7/i5/i3/Celeron processor
System Chipset
Intel○RHaswell H81
System Memory
One 204-pin DDR3 SO-DIMM socket
Maximum memory up to 8GB
BIOS
American Megatrends Inc. UEFI (Unified Extensible Firmware Interface) BIOS
I/O System
Standard I/O
2 x RS-232/422/485
2 x USB 2.0, 2 x USB 3.0
Video I/O
1 x HDMI out
Ethernet
2 x RJ45 for Giga Ethernet
Audio
1 x Line-out
1 x Mic-in
Expansion
2 x Mini-card slot (If you install 3G mini-card, you can’t use mSATA storage card)
2 x SATA 3 , 2 x SATA 2
Storage
1 x 2.5”HDD/SSD Bay
1 x CFastslot and mSATA
Power connector
1 x 19V DC-IN power connector

GOT3187W-881-PCT User’s Manual
Introduction 3
System Specification
18.5”WXVGA(1366x768) LCD with LED backlight & 300nits brightness
Projected Capacitive Multi Touch
Fanless Heat Dispensing Design
IP65 front bezel
Disk drive housing:
1x 2.5”SATA drive
Net Weight
6.3Kg(13.9 lb)
Dimension (Main Body Size)
460x285x89.5mm
Operation Temperature
0℃to 40℃
Relative Humidity
20% to 90% @ 40℃, Non-Condensing
Power input
19V DC-IN power connector
NOTE All specifications and images are subject to change without notice.
NOTE If the operation temperature is higher than 40 ℃ , the wide temperature HDD/CF
card are recommended to be used on the device.
NOTE If the operation temperature is higher than 45 ℃ , the wide temperature DRAM is
recommended to be used on the device.

GOT3187W-881-PCT User’s Manual
4 Introduction
1.3 Dimensions and Outlines
The following diagrams show the dimensions and outlines of GOT3187W-881-PCT
Outline Dimension: 460x285x89.5(mm)
Cut out: 448.74x237.74mm

GOT3187W-881-PCT User’s Manual
Introduction 5
1.4 I/O Outlets
Please refer to the following illustration for I/O locations of the GOT3187W-881-PCT.
No
Function
No
Function
1
POWER SWITCH (ATX)
8
2 x USB 2.0
2
Power Input connector
9
2 x USB 3.0
3
Audio Line-out
10
CFast card slot
4
Audio MIC-in
11
For 3 x antennas
5
COM1/2 (RS-232/422/485)
12
LED Backlight Power On/off
6
HDMI output
13
Brightness +
7
Dual Giga Ethernet
14
Brightness -
12
13
14

GOT3187W-881-PCT User’s Manual
6 Introduction
1.5 Packing List
When you receive the GOT3187W-881-PCT, the bundled package should contain the
following items:
GOT3187W-881-PCT unit x 1
Driver CD x1
Panel mount kit x 12
Screws for HDD x 4
SATA data cable x 1
SATA power cable x 1
If you can not find the package or any items are missing, please contact Axiomtek distributors
immediately.

GOT3187W-881-PCT User’s Manual
Hardware and Installation 7
Chapter 2
Hardware and Installation
The GOT3187W-881-PCT provides rich I/O ports and flexible expansions for you to meet
different demand, for example CF card. The chapter will show you how to install the hardware.
It includes:
CFast Card Installation
Open Back Cover
Jumper & COM Port Connector
Mounting Method
Hard Disk Installation
Installing CPU and PCH Thermal Pad
DRAM Installation
Wireless LAN Card
Power Adapter

GOT3187W-881-PCT User’s Manual
8 Hardware and Installation
2.1 CFast card Installation
The GOT3187W-881-PCT provides one CFast card slot for users to install CFast card. Please
refer to the following instructions for installation:
Step 1 Open the cover, unscrew 2 screws on the chassis.
Step 2 Stick the mylar on the CFast card bottom side.
Step 3 Insert the CFast card to the CFast card slot, then finding the CFast cover and
screw it.

GOT3187W-881-PCT User’s Manual
Hardware and Installation 9
2.2 Open back cover
This section tells users how to open back cover. Please follow the steps below.
Step 1 Unscrew 6 screws on the back cover. Please refer the drawing below.
Step 2 Remove the back cover.

GOT3187W-881-PCT User’s Manual
10 Hardware and Installation
2.3 Jumper and COM port Connector
SBC87881 Top Side

GOT3187W-881-PCT User’s Manual
Hardware and Installation 11
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. The following
illustration shows how to set up jumper.
Before applying power to GOT3187W-832-PCT, please make sure all of the jumpers and
switch are in factory default position. Below you can find a summary table and onboard default
settings.
Jumper & Switch Setting
Section
CMOS Clear Jumper
2.3.1
External Connectors
Section
DC Power In Connector
2.3.2
HDMI Connector
2.3.3
COM Serial Port Connector
2.3.4
Ethernet Connector
2.3.5
Internal Connectors
Section
Serial ATA Connectors
2.3.6
SIM Card Slot
2.3.7
CFast™ Socket
2.3.8
Half-Size Mini Card Slot
2.3.9
Full-Size Mini Card w/ SIM Slot/ mSATA
2.3.10
2.3.1 CMOS Clear Jumper (SJP2 on SBC87881)
Function
Setting
Normal (Default)
1-2
Clear RTC
2-3

GOT3187W-881-PCT User’s Manual
12 Hardware and Installation
2.3.2 DC Power In Connector (SCN1)
The system supports a DC 19V power-din connector for system power input.
2.3.3 HDMI Connector
The HDMI (High-Definition Multimedia Interface) is a compact digital interface which is capable
of transmitting high-definition video and high-resolution audio over a single cable. Its interface
is available through connector SCN6 or SCN7.
Pin
Signal
Pin
Signal
1
HDMI OUT_DATA2+
11
GND
2
GND
12
HDMI OUT Clock-
3
HDMI OUT_DATA2-
13
N.C.
4
HDMI OUT_DATA1+
14
N.C.
5
GND
15
HDMI OUT_SCL
6
HDMI OUT_DATA1-
16
HDMI OUT_SDA
7
HDMI OUT_DATA0+
17
GND
8
GND
18
+5V
9
HDMI OUT_DATA0-
19
HDMI_HTPLG
10
HDMI OUT Clock+
Pin
Signal
1
GND
2
GND
3
DC 19V
4
DC 19V

GOT3187W-881-PCT User’s Manual
Hardware and Installation 13
2.3.4 COM Serial Port Connector
The system has six serial ports. COM1/2 are RS-232/422/485 ports. Please refer to Chapter 3
for the detail of BIOS setting.
Pin
RS-232
RS-422
RS-485
COM1/2
1
DCD, Data Carrier Detect
TX-
Data-
2
RXD, Receive Data
TX+
Data+
3
TXD, Transmit Data
RX+
No use
4
DTR, Data Terminal Ready
RX-
No use
5
GND, Ground
No use
No use
6
DSR, Data Set Ready
No use
No use
7
RTS, Request To Send
No use
No use
8
CTS, Clear To Send
No use
No use
9
RI, Ring Indicator
No use
No use
2.3.5 Ethernet Connector
The RJ-45 connector is for Ethernet. To connect the board to a 1000/100/10 Base-T hub, just
plug one end of the cable into connector and connect the other end (phone jack) to a
1000/100/10-Base-T hub.
Pin
Signal
Pin
Signal
L1L2L3L4L5L6L7L8
A B
A
B
L1
MDI0+
L5
MDI2-
L2
MDI0-
L6
MDI1-
L3
MDI1+
L7
MDI3+
L4
MDI2+
L8
MDI3-
A
Active LED (Yellow)
B
100 LAN LED (Green)/ 1000 LAN LED (Orange)

GOT3187W-881-PCT User’s Manual
14 Hardware and Installation
2.3.6 Serial ATA Connectors
These Serial Advanced Technology Attachment (Serial ATA or SATA) connectors are for
high-speed SATA interfaces. They are computer bus interfaces for connecting to devices such
as hard disk drives.
2.3.7 SIM Card Slots (SCN19)
GOT3187W-881-PCT includes one SIM slots on the bottom side of the system for inserting
SIM Card. It is mainly used in 3G wireless network application.
Pin
Signal
1
GND
2
SATA_TX+
3
SATA_TX-
4
GND
5
SATA_RX-
6
SATA_RX+
7
GND
Pin
Signal
1
PWR
2
RST
3
CLK
4
NC
5
GND
6
VPP
7
I/O
8
NC