AXIOMTEK P6105 User manual

P6105
10.4” XGA TFT Railway Monitor
User’s Manual

ii
Disclaimers
This manual has been carefully checked and believed to contain accurate information.
Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third
party’s rights, and any liability arising from such use.
Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,
completeness or usefulness of any information in this document. Axiomtek does not make any
commitment to update the information in this manual.
Axiomtek reserves the right to change or revise this document and or product at any time
without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,
without the prior written permission of Axiomtek Co., Ltd.
Co yright 2018 Axiomtek Co., Ltd.
All Rights Reserved
June 2018, Version A3
Printed in Taiwan

iii
Safety Precautions
Before getting started, read the following important cautions.
1. Be sure to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and place all electronic components in any
static-shielded devices. Most electronic components are sensitive to static electrical
charge.
2. Disconnect the power cords from the P6105 Series before making any installation. Be
sure both the system and the external devices are turned OFF. Sudden surge of power
could ruin sensitive components. Make sure the P6105 Series is properly grounded.
3. Do not open the system’s top cover. If opening the cover for maintenance is a must, only
a trained technician is allowed to do so. Integrated circuits on computer boards are
sensitive to static electricity. To avoid damaging chips from electrostatic discharge,
observe the following precautions:
 Before handling a board or integrated circuit, touch an unpainted portion of the
system unit chassis for a few seconds. This will help to discharge any static
electricity on your body.
 When handling boards and components, wear a wrist-grounding strap, available
from most electronic component stores.
Trademarks Acknowledgments
Axiomtek is a trademark of Axiomtek Co., Ltd.
IBM, PC AT, PS 2, VGA are trademarks of International Business Machines Corporation.
AMI is trademark of American Megatrend Inc.
Other brand names and trademarks are the properties and registered brands of their
respective owners.

iv
Table of Contents
Disclaimers ...................................................................................................... i
Safety Precautions ........................................................................................ iii
Chapter 1 Introduction .............................................. 1
1.1 General Descri tion ............................................................................ 1
1.2 Features ............................................................................................... 2
1.3 S ecifications ...................................................................................... 2
1.4 Dimensions and Outlines ................................................................... 3
1.5 I/O Outlets ............................................................................................ 4
1.6 Packing List ......................................................................................... 5
Chapter 2 System Setup ............................................ 7
2.1 System Configuration ......................................................................... 8
2.2 Panel Mounting.................................................................................... 9
2.3 VESA Mounting ................................................................................... 9
2.4 I/O PIN ASSIGNMENT ........................................................................ 10
2.4.1 DC power Jack w M12 connector, 24VDC or 110VDC power input ......... 10
2.4.2 Waterproof Power Cable ........................................................................ 10
2.4.3 VGA PORT............................................................................................. 11
2.4.4 RS 232 PORT, support multi-function of T S and remote. ........................ 11
2.4.5 Y cable for RS-232 to resistive touch and remote ................................... 12
2.4.6 HDMI PORT ........................................................................................... 13
2.4.7 DVI-D PORT .......................................................................................... 13
ppendix Supported Input Timing Modes .............. 15
ppendix B OSD Operation ......................................... 17
Function Descri tion of OSD Menu ............................................................ 17
ppendix C D Board Management System .............. 19

P6105 User’s Manual
Introduction 1
Cha ter 1
Introduction
This chapter contains general information and detailed specifications of the P6105. Chapter 1
includes the following sections:
 General Descri tion
 Features
 S ecifications
 Dimensions and Outlines
 I/O Outlets
 Package List
1.1 General Descri tion
The P6105, a industrial 10.4 inches view area LCD Monitor comes with slim, light and reliable
features to replace traditional bulky CRT for Industrial application. Its unique flat design is fit for
panel mounting and VESA mounting. The display interface offers DVI-D, HDMI digital
interfaces and VGA for different input source from PC system or multimedia system that let you
upgrade the display don’t change anything from your system. With a anti-vibration design, the
rugged HMI can work well on the train.
This LCD monitor builds in color active matrix thin-film-transistor (TFT) liquid crystal display to
provide superior display performance. A maximum resolution of 1024x768 is ideal for
displaying complex graphics and high definition images. Other outstanding designs that
enhance this LCD monitor’s performance are Plug & Play compatibility, and OSD (On Screen
Display) controls, especially OSD, it made you ease adjustment on screen image.

P6105 User’s Manual
2 Introduction
1.2 Features
 High contrast color 10.4” XGA TFT LCD dis lay su ort resolution u to 1024x768
 Auto-dimming for different environment
 Flat design with NEMA4/IP65-com liant
 Suits with resistive touch
 High Brightness and Ultra-wide viewing angle with anti-glare features.
 Power management system conforms to VESA standard
 Advanced OSD control for icture quality adjustment
 Provide remote control for OSD adjustment (refer to A endix C)
1.3 S ecifications
 10” XGA(1024x768) LCD with LED backlight
 Resistive Touch
 Front bezel design with NEMA4/IP65
 Control: OSD (On Screen Dis lay) control ad on the side
 Mounting: Su ort Panel mount and VESA arm mount
 Net Weight
 P6105: 2KGS
 Dimension (Main Body Size)
 P6105: 310X214X49.2 mm
 O eration Tem erature
 -25

to 55

 Relative Humidity
 20% to 90% @ 40

, Non-Condensing
 Power in ut
 24VDC or 110VDC power input
 Max power consumption: 15.6W
 Audio
 3W speaker x 1
 Line-In for audio input from VGA DVI-D
NOTE: All specifications and images are subject to change without notice.

P6105 User’s Manual
Introduction 3
1.4 Dimensions and Outlines
The following diagrams show the dimensions and outlines of P6105

P6105 User’s Manual
4 Introduction
1.5 I/O Outlets
Please refer to the following illustration for I O locations of the P6105.
 I/O outlets with VGA in ut and s eaker
No Function No Function
1 Menu (Enter function) 8 Touch & remote control via RS-232
2 SEL+ 9 VGA
3 SEL- 10 HDMI
4 Exit 11 DVI-D
5 Power LED 12 Line-in
6 Power Switch 13 Speaker
7 DC power input
1
2
3
4
5
6

P6105 User’s Manual
Introduction 5
1.6 Packing List
When you receive the P6105 VGA input version, the bundled package should contain the
following items:
 P6105 unit x 1
 VGA cable x 1
 RS-232 cable x1 (for resisitve touch)
If you request for a cable assembly for resistive touch and remote control, please refer to
section 2.4: Pin assignment.
If you cannot find the package or any items are missing, please contact Axiomtek distributors
immediately.

P6105 User’s Manual
6 Introduction
This age is intentionally left blank.

P6105 User’s Manual
System Setup 7
Cha ter 2
System Setu
This chapter details the system parts and components with figures. Sections include:
 System Configuration
 Panel Mounting
 VESA Mounting
 I/O Pin Assignment
 DC Power
 Water roof Power Cable
 VGA PORT
 RS-232 PORT, su ort multi-function of T/S and remote
 Y cable for RS-232 to resistive touch and remote
 HDMI PORT
 DVI-D PORT

P6105 User’s Manual
8 System Setup
2.1 System Configuration
The figure below shows the side views of P6105 series.
1. Menu:
Press this button to turn on off the OSD (On Screen Display) main menu.
Press this button to activate selected items.
2. SEL+:
To scroll up the menu.
To increase the value of selected item.
3. SEL-:
To scroll down the menu.
To decrease the value of selected item.
4. Exit:
Jump out the selection icon .
Auto adjust.
5. Power LED:
When the light is green, the power is on, red light when stand by.
6. Power switch:
Press this button to turn on off the monitor.

P6105 User’s Manual
System Setup 9
2.2 Panel Mounting
The P6105 is designed for panel mount application. To mount the P6105, the standard holes
are on the front of P6105.
2.3 VESA Mounting
The P6105 provides rack mount at the back of system. Screw four screws to fix the kit in the
back chassis.

P6105 User’s Manual
10 System Setup
2.4 I/O PIN ASSIGNMENT
The P6105 supports DC-in connector, T S port, HDMI port, DVI-D port, and Line-In port. Detail
pin assignment, please refer to following information.
2.4.1 DC ower Jack w/ M12 connector, 24VDC or 110VDC ower
in ut
2.4.2 Water roof Power Cable
Please follow the pin assignment for the power input.
Pin
Signal
V+
DC +24V power input
Earth Ground
GND
GND
GND
GND
Pin
Signal
1 V+ (+24V)
2 V+ (+24V)
3 GND
4 GND
5 Earth Gound

P6105 User’s Manual
System Setup 11
2.4.3 VGA PORT
Pin Define Pin Define Pin Define
1 Red 6 Red GND 11 N.C.
2 Green 7 Green GND 12 DDC Data
3 Blue 8 Blue GND 13 H-Sync
4 N.C. 9 +5V (In) 14 V-Sync
5 Ground 10 Ground 15 DDC Clock
2.4.4 RS 232 PORT, su ort multi-function of T/S and remote.
Pin Define Pin Define
1 Remote RXD
6 Touch DTR
2 Touch TXD 7 Touch RTS
3 Touch RXD 8 Remote TXD
4 Touch DSR 9 N.C.
5 Ground

P6105 User’s Manual
12 System Setup
2.4.5 Y cable for RS-232 to resistive touch and remote
DB9 – Connect to P6105
DB9 male, connect to P6105
Pin Define Pin Define
1 Remote RXD 6 Touch DTR
2 Touch TXD 7 Touch RTS
3 Touch RXD 8 Remote TXD
4 Touch DSR 9 N.C.
5 Ground
DB9 female, connect to PC for touch
Pin Define Pin Define
1 N.C. 6 Touch DTR
2 Touch TXD 7 Touch RTS
3 Touch RXD 8 N.C.
4 Touch DSR 9 N.C.
5 Ground
DB9 female, connect to PC for remote
Pin Define Pin Define
1 N.C. 6 N.C.
2 Remote RXD 7 N.C.
3 Remote TXD 8 N.C.
4 N.C. 9 N.C.
5 Ground

P6105 User’s Manual
System Setup 13
2.4.6 HDMI PORT
Pin Define Pin Define Pin Define
1 TMDS2+ 8 GND 15 DDC clock
2
Cable Detect
(GND) 9 TMDS0- 16 DDC Date
3 TMDS2- 10 TMDS clock+ 17 GND
4 TMDS1+ 11 GND 18 Vin (+5V)
5 GND 12 TMDS clock- 19 Hot plug detect
6 TMDS1- 13 N.C.
7 TMDS0+ 14 N.C.
2.4.7 DVI-D PORT
Pin Define Pin Define Pin Define Pin Define
1 TMDS2− 7 DDC data 13 N.C. 19 GND
2 TMDS2+ 8 N.C. 14 Vin (+5V) 20 N.C.
3 GND 9 TMDS1- 15 GND 21 N.C.
4 N.C. 10 TMDS1+ 16 Hot plug detect 22 GND
5 N.C. 11 GND 17 TMDS0- 23 TMDS clock+
6 DDC clock 12 N.C. 18 TMDS0+ 24 TMDS clock−

P6105 User’s Manual
14 System Setup
This age is intentionally left blank.

P6105 User’s Manual
Supported Input Timing Modes 15
A endix A
Su orted In ut Timing Modes
SPEC
MODE
Pixel
Freq.
Horizontal Timing Vertical Timing
Sync
Polar
Freq. Total Active
Sync
Polar
Freq.
Total
Active
MHZ Hz Pixel Pixel Hz Line Line
640×480
@60Hz
25.175
VESA N 31.469 800 640 N 59.940
525 480
640×480
@60Hz
25.175
VESA N 31.469 800 640 N 59.940
525 480
800×600
@60Hz 0
40.000
VESA P 37.879 1056 800 P 60.317
628 600
SPEC
MODE
Pixel
Freq.
Horizontal Timing Vertical Timing
Sync
Polar
Freq. Total
Active
Sync
Polar
Freq. Total
Active
MHZ KHz Pixel
Pixel
Hz Line
Line
1024×768
@60Hz
65.000
VESA N 48.363
1344
1024 N 60.005
806 768
NOTE: Timing depends on LCD anel’s requirement.

P6105 User’s Manual
16 Supported Input Timing Modes
This age is intentionally left blank.