AXIOMTEK OPS883-H Series User manual

4 9412M883060E
©Copyright 2016 Axiomtek Co., Ltd.
Version A2 Nov 2016
Printed in Taiwan
Installing the Mini PCIe cards
The OPS883-H series provides one Mini card slot for user to install
mSATA/ wireless LAN cards, please refer to the following
instructions and illustration.
Step 1 Loosen the screws per illustrated.
Step 2 Then open the cover carefully.
Step 3 You can find the position of Mini PCIe slot and please
insert it then fasten screw by yourself.
Step 4 Fasten all of screws with bracket to finish installation,
and M3x4 screws are included.
OPS883-H Quick Installation Guide
9412M883060E 1
©Copyright 2016 Axiomtek Co., Ltd.
Version A2 Nov 2016
Printed in Taiwan
Checklist
OPS module x 1 Driver Disc x 1
M4 x 6 screw x 2 M2 x 5 screw x 2
M3 x 4 screw x 2 Thermal Grease x 1
Quick Installation Guide x1
Note: Please contact your local vendors if any damaged or missing items. DO
NOT apply power to the board if there is any damaged component.
Please refer to the product information CD for the complete user’s
manual, drivers and utilities. User’s manual and related documents are
in Acrobat PDF format.
Please notice that two M3 x4 screws are offering to fix the OPS
enclosure if you would like to maintain your CPU/DRAM or mPCIe.
Dimensions
OPS883-H Series 4th Gen Intel Core Open Pluggable Specification (OPS) Digital Signage Player

2 9412M883060E
©Copyright 2016 Axiomtek Co., Ltd.
Version A2 Nov 2016
Printed in Taiwan
Installing the Memory Module
Step 1 Loosen the screws on the real of chassis as illustrated.
Step 2 After losing the screws, extract the real of chassis out of the
module.
Step 3 Place the memory module into the socket and press it
firmly. The socket latches are levered upwards and
clipped on to the edges of the DIMM.
Step 4 The DRAM installation is finished, please fasten all of
screws with bracket, and M3x4 screws are included.
9412M883060E 3
©Copyright 2016 Axiomtek Co., Ltd.
Version A1 Nov 2016
Printed in Taiwan
Installing the HDD/ SSD
The OPS883-H series provides one 2.5” SATA HDD tray to install
2.5” HDD. When please refer to the following instructions and
illustration
Step 1 Loosen the screws per illustrated.
Step 2 Please refer to the below photo to connect the target
2.5” HDD/SSD with HDD’s bracket.
Step 3 Then plug HDD drive in to HDD connector.
Step 4 Finally, fasten two screws on HDD cover firmly.