Axis T90B35 W-LED User manual

AXIS T90B Series
AXIS T90B15 W-LED
AXIS T90B25 W-LED
AXIS T90B35 W-LED
AXIS T90B20 IR-LED
AXIS T90B30 IR-LED
AXIS T90B40 IR-LED
Installation Guide

Legal Considerations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
Lia ility
Every care has been taken in the preparation of this
document. Please inform your local Axis ofce of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document including but not limited to
the implied warranties of merchantability and tness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular and without limitation these
intellectual property rights may include one or more
of the patents listed at www.axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
Equipment Modications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modications will invalidate
all applicable regulatory certications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS AXIS ETRAX ARTPEC
and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All
other company names and products are trademarks or
registered trademarks of their respective companies.
Regulatory Information
Europe
This product complies with the applicable
CE marking directives and harmonized standards:
•Electromagnetic Compatibility (EMC)
Directive 2004/108/EC. See Electromagnetic
Compatibility (EMC) on page 2 .
•Low Voltage (LVD) Directive 2006/95/EC. See
Safety on page 3 .
•Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and
ecycling on page 3 .
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact Information on page 3 .
Electromagnetic Compati ility (EMC)
This equipment has been designed and tested to fulll
applicable standards for:
•Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This equipment has been tested using a shielded
network cable (STP) and found to comply with the
limits for a Class B digital device pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates
uses and can radiate radio frequency energy and
if not installed and used in accordance with the
instructions may cause harmful interference to radio
communications. However there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference
to radio or television reception which can be
determined by turning the equipment off and on the
user is encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment
and receiver.
•Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV
technician for help.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
Canada
This Class B digital apparatus complies with Canadian
ICES-003. The product shall be connected using
a shielded network cable (STP) that is properly
grounded.
Cet appareil numérique de la classe B est confome à
la norme NMB-003 du Canada. Le produit doit être
connecté à l'aide d'un câble réseau blindé (STP) qui
est correctement mis à la terre.
Europe
This digital equipment fullls the requirements for RF
emission according to the Class B limit of EN 55022.
The product shall be connected using a shielded
network cable (STP) that is properly grounded.
This product fullls the requirements for immunity
according to EN 61000-6-1 residential commercial
and light-industrial environments.
This product fullls the requirements for immunity
according to EN 61000-6-2 industrial environments.

Australia/New Zealand
This digital equipment fullls the requirements
for RF emission according to the Class B limit of
AS/NZS CISPR 22. The product shall be connected
using a shielded network cable (STP) that is properly
grounded.
Korea
이 기기는 가정용(B급) 전자파적합기기로서
주로 가정에서 사용하는 것을 목적으로 하며,
모든 지역에서 사용할 수 있습니다. 적절히
접지된 STP (shielded twisted pair) 케이블을
사용하여 제품을 연결 하십시오.
Safety
Photo iological Safety
This product fullls the requirements for
photobiological safety according to IEC/EN 62471
(risk group 2).
Disposal and Recycling
When this product has reached the end of its
useful life dispose of it according to local laws
and regulations. For information about your
nearest designated collection point contact your
local authority responsible for waste disposal. In
accordance with local legislation penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall
not be disposed of together with household or
commercial waste. Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE) is
applicable in the European Union member states.
To prevent potential harm to human health and the
environment the product must be disposed of in an
approved and environmentally safe recycling process.
For information about your nearest designated
collection point contact your local authority
responsible for waste disposal. Businesses should
contact the product supplier for information about
how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the requirements
of the legislative act Administration on the Control of
Pollution Caused by Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: [phone]
Fax: [phone]
www.axis.com
Support
Should you require any technical assistance please
contact your Axis reseller. If your questions cannot
be answered immediately your reseller will forward
your queries through the appropriate channels to
ensure a rapid response. If you are connected to the
Internet you can:
•download user documentation and software
updates
•nd answers to resolved problems in the FAQ
database. Search by product category or
phrase
•report problems to Axis support staff by logging
in to your private support area
•chat with Axis support staff (selected countries
only)
•visit Axis Support at www.axis.com/techsup/
Learn More!
Visit Axis learning center www.axis.com/academy/ for
useful trainings webinars tutorials and guides.

AXIS T90B Series
Safety Information
Read through this Installation Guide carefully before installing the product.
Keep the Installation Guide for future reference.
Hazard Levels
DANGER Indicates a hazardous situation which if not
avoided will result in death or serious injury.
WARNING Indicates a hazardous situation which if not
avoided could result in death or serious injury.
CAUTION Indicates a hazardous situation which if not
avoided could result in minor or moderate injury.
NONO
NOTICETICE TICE Indicates a situation which if not avoided could
result in damage to property.
Other Message Levels
Important Indicates signicant information which is
essential for the product to function correctly.
Note Indicates useful information which helps in
getting the most out of the product.
5

AXIS T90B Series
Safety Instructions
WARNING
• The Axis product shall be installed by a trained professional.
NONO
NOTICETICE TICE
• The Axis product shall be used in compliance with local laws
and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Do not install the product on unstable brackets surfaces or
walls.
• Use only applicable tools when installing the Axis product.
Excessive force could cause damage to the product.
• Do not use chemicals caustic agents or aerosol cleaners. Use a
clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with technical specication of
the product. These can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product by yourself. Contact Axis
support or your Axis reseller for service matters.
Transportation
NONO
NOTICETICE TICE
• When transporting the Axis product use the original packaging
or equivalent to prevent damage to the product.
6

AXIS T90B Series
Installation Guide
This Installation Guide provides instructions for installing AXIS T90B Series.
Installation Steps
1. Make sure the package contents tools and other materials
necessary for the installation are in order. See page 7 .
2. Study the hardware overview. See page 8 .
3. Study the specications. See page 14.
4. Install the hardware. See page 15.
Package Contents
• AXIS T90B Illuminator including power cable
• 1 pre-mounted diverging lens
• 2 separate diverging lenses
Optional Accessories
• Mounting brackets
• Remote control
• Diverging lens with additional angle
• Power supply
For information about available accessories see www.axis.com
7

AXIS T90B Series
Hardware Overview
Illuminator
1Photocell
2Cable
3Breather gland
8

AXIS T90B Series
1Power cable (red)
2Power cable (black)
3Photocell cable (white)
4Photocell cable (yellow)
5Telemetry cable (purple)
6Telemetry cable (orange)
9

AXIS T90B Series
1ed LED indicator
2Amber LED indicator
3Green LED indicator
4emote control receiver
5Mounting bracket (pre-mounted)
10

AXIS T90B Series
AXIS T90B40 IR-LED
1Cables
2Mounting bracket (pre-mounted)
3Bolt
Optional Accessories
Remote Control
For information how to use the remote control see Access the Product.
11

AXIS T90B Series
1POWE ADJUST buttons
2PHOTOCELL ADJUST buttons
3TIME buttons
4Photocell disable button
5DIM button
6ESET button
7STATUS button
8Disable remote control setup button
9TELEMET Y button
Mounting Brackets
To install the product using a compatible bracket from AXIS T90B
Mounting Accessories see the Installation Guide delivered separately with
the mounting bracket.
12

AXIS T90B Series
LED Indicators
There are three colored LED indicators on the base of the illuminator which
provide operating and status information. The color status depends on
the current operating mode:
• Programming Mode
• Normal Operating Mode
Programming Mode
LED Indi ator Indi ated Behavior
Solid Green Power on
Flashing Green Remote control IR receiver error
Solid Amber Illuminator receiving valid
command from remote control
Flashing Amber Illuminator in Programming Mode
Solid Red Internal LED error
Flashing Red Input voltage supply error*
Normal Operating Mode
LED Indi ator Indi ated Behavior
Solid Green Power on
Flashing Green Remote control IR receiver error
13

AXIS T90B Series
Normal Operating Mode (Continued)
Solid Amber Input voltage level error*
Solid Red Internal LED error
*Once the voltage error has been corrected disable the remote control
setup or restart the illuminator to turn the status LED off.
Connectors and Buttons
For specications and operating conditions see page 14.
Power Connector
• AC/DC power connector
Specications
Operating Conditions
Produ t Temperature Humidity
AXIS T90B Series -50 °C to 50 °C
(-58 °F to 122 °F) 10–100% RH (con-
densing)
Power Consumption
Produ t Value
AXIS T90B15 W-LED 12–24 V AC/DC max 12 W
AXIS T90B20 IR-LED 12–24 V AC/DC max 24 W
14

AXIS T90B Series
AXIS T90B25 W-LED 12–24 V AC/DC max 48 W
AXIS T90B30 IR-LED 12–24 V AC/DC max 24 W
AXIS T90B35 W-LED 12–24 V AC/DC max 48 W
AXIS T90B40 IR-LED 12–24 V AC/DC max 96 W
For more information about power consumption see Technical
Specications on page 29
Install the Hardware
To install the product using a compatible bracket from AXIS T90B
Mounting Accessories see the Installation Guide delivered separately with
the mounting bracket.
15

AXIS T90B Series
CAUTION
IR emitted from this product. Avoid prolonged eye exposure or
use appropriate shielding or eye protection at distances of less
than 1.5 m.
Follow these installation procedures:
1. If required remove the screws and move the standard bracket
to the top of the illuminator.
2. If required loosen the screws and turn the bracket 90°.
16

AXIS T90B Series
3. If required loosen the screws and change to a diverging
lens with the desired angle of illumination. The angle of
illumination should be adjusted according to the camera eld
of view to light the whole scene adequately. See Technical
Specications.
17

AXIS T90B Series
1Screws
2Diverging lens
Note
Adjust the vertical position of the illuminator to ensure that the
eld of view of the camera is illuminated.
18

AXIS T90B Series
4. Position the illuminator adjacent to the camera and point the
illuminator towards the scene.
CAUTION
Red cable = +ve Black cable = -ve (polarity sensitive)
5. Mount the power supply.
6. Connect the illuminator to the power supply.
19

AXIS T90B Series
1Illuminator
2Power cable
3Power supply
7. Set photocell following output (White & Yellow) Volt free
output — normally open (day) to normally closed (night).
Connect direct to camera if required to control switchover
of day/night cameras.
Access the Product
Programming Mode
The illuminator has the following default settings:
• Power set to maximum 100%
• Photocell set to medium sensitivity level: 10 lux On 30 lux Off.
• Timer disabled
20