Axis AX1511 User manual

INSTRUCTION MANUAL
2WARRANTY
YEAR
AX1511
10.1 INCH ROOFMOUNT LED-TFT
MONITOR PLAYER SYSTEM
with BUILT-IN DVD-CD PLAYER
SPECIFICATIONS
GENERAL
- 10.1 Inch (25.7cm) LED-TFT Monitor
- 1080P Decoding
- 1024(W) x RGB x 600(H) Resolution
- LED Backlight
- 16:9 Screen Format
- PAL/NTSC Auto Colour System
- AV Input
- AV Output
- Video Input (Side Panel)
- Headphone Jack
- IR Transmitter (2 Ch for Wireless Headphones)
- Wireless FM Modulator (8 Ch for Audio Output)
- Function Buttons on Front Pod
- Built-In Dome Lights
- On-Board Stereo Speakers
- Universal Installation
- 12V (10~14V) DC Input / Negative Ground
- -10° ~ +60°C Operating Temperature
- 300(W) x 253(L) x 55(H)mm Dimensions (when closed)
DVD/CD PLAYER/MULTIMEDIA
- DVD/CD/MP3/WMA/MPEG2/MPEG4/MKv/H.264/
AVS/VCI/RM/RM8/AVI/VP6/VP8 Playback Systems
- USB 2.0 Port
- SD/MMC/MS Card Reader
INCLUDED
- Full Function Remote Control
- Installation Hardware
- Installation Manual
www.audioxtra.com.au

Thank you for choosing this premium roof mount DVD multimedia system!
We wish you countless hours of relaxation and entertainment from these
versatile features.
Numerous formats can seamlessly be played with viewing on its high denition
colour monitor.
There are three methods of enjoying the audio by selecting:
1) the on-board speakers,
2) the wireless IR transmission (using optional wireless headphones); or
3) by tuning your car radio to one of the FM frequencies transmitted from the
built-in modulator.
Being of compact, slim construction, installation should suit most locations.
The screen simply folds away when not in use.
Enjoy!
CONTENTS
Functions 3
Installation 4
Remote control/Battery Installation 5
Operation of DVD system/USB/SD 6
Troubleshooting & Cautions 7
2.

3.
FUNCTIONS:
1. Power Mode Switch
2. Play/Pause
3. Down/Eject
4. Up/Stop
5. Previous/Volume-
6. Menu
7. Next Track/Volume+
8. Light Switch
9. Standby Switch
10. Open
11. Disc Slot
DVD Connection Diagram:
Audio output(L)
BAT
Audio output(R)
(Red) BAT
FM Antenna (Green)
(Leave Disconnected)
Please switch to change the polarity from door light trigger circuit
(Default is Negative Ground)
(Black)
(Blue)
①②③④⑤⑥⑦⑧
⑨
⑩
⑪

INSTALLATION
1. Remove 4 mounting screws
(main chassis) and release
mounting plate.
(picture 1)
2. Carefully align metal mounting
plate with installation position
and secure. Use correct screws to
suit the vehicle and location.
*NOTE: If the ceiling structure is curved or uneven,
a backing board (eg plywood) may be required
as a base rst to hold the metal mounting plate.
3. Carefully locate all cables so no
damage occurs to either the unit
or vehicle.
4. Attach (4 screws) monitor frame
to metallic mounting plate.
(Do not overtighten screws)
4.
①
②
③
④
For hot environments we recommend applying
a sheet of Dynamat Xtreme between the roof
and mounting plate. Heat aects performance
of laser pick-ups.
e
re
co
mm
en
d
ap
pl
yi
ng
Polarity Switch

REMOTE CONTROL
Battery Installation for Remote Control
1. Do not press remote control when
disassembling the battery cover.
2. Remove battery when not in use for an
extended period.
3. Normal battery life is about one year.
Replace battery when the remote
control range reduces.
5.
Monitor menu key
SELECT

6.
OPERATION OF DVD SYSTEM/USB/SD:
Play DVD/CD/MP3
• Turn on the player and insert a disc with the label facing up.
• The disc will automatically play.
• To stop, press STOP button on remote.
• To pause, press PLAY/PAUSE button on remote.
• To resume again, press PLAY/PAUSE button on remote.
To select a track:
1) Choose the desired track by using NEXT or PREVIOUS buttons or
2) Enter the number of the track to play directly.
Disc Menu
• To display the recorded menu of DVD/VCD 2.0 disc, press DVD menu button.
• If embedded in the disc, a menu will appear. Scene selection, Special Features, etc.
(Menu appearance will dier on various discs - NOTE: CD + VCD1.1 does not have this function)
• Press the arrow buttons to nd the desired setting. Press the ENTER button.
Menu:
• Volume
• Brightness
• Contrast
• Colour
• Aspect Ratio
• FM Mode
• IR Mode
• Sleep Timer
• Language
• Mode
• Reset

TROUBLESHOOTING
Faults Possible Reasons
No sound and image Power is disconnected; the machine is not turned on
No image Standby switch is pressed down; disc is scratched;
signal wire is disconnected
No sound Volume too low or the volume setup is not workable
Black screen Incorrect setup of image luminance and contrast;
undervoltage
Blurring and
unstable image
Disc is scratched
Poor colour Function menu setup is incorrect; weak signal
No power Voltage is not correct; check interconnect circuit;
fuse is blown
No image after
loading the disc
Only audio frequency on the disc; disc is scratched;
disc format is not supported
Unstable sound
caused by vibration
DVD is dirty or seriously damaged
Unstable sound even
with no vibaration
Disc is dirty or scratched; clean or replace the disc
CAUTIONS
1. Do not expose the unit to rain, damp environments, dust and direct sunlight, or
excessive vibration.
2. Do not attempt to repair the unit by yourself. Please turn o and if any problems
arise, seek professional advice.
3. Do not use strong chemical cleaners when cleaning the unit. Please use a soft
damp cloth.
4. The unit storage temperature is from -20°C to 60°C. The operating temperature is
from -10°C to 60°C.
5. For your safety, please do not operate this monitor when driving as it is illegal in
most regions.
6. Safe power supply: DC12V (voltage range: 10V-14V)
Attention!
There may be some small bright spots
appear on the screen. This is common
technical matter with TFT pixels and
does not indicate a defect of this unit. 7.

AX1511