Axis BA 1858 User manual

BA 1858
18.5” FLIP DOWN HD BUS MONITOR
INSTRUCTION MANUAL
SPECIFICATIONS
GENERAL
- Screen: 18.5” (47cm)
- Format: 16:9 Widescreen
- Resolution: 1366 x 768 HD
Supports 1080p
- Viewing Angle: 85° (L/R) 75/85° (U/D)
- Video System: PAL/NTSC Auto Switchable
- Image Adjustment: Brightness/Colour/Contrast/Saturation
- Mounting: Fixed - Wall or Roof
- Inputs: HDMI, 2 x RCA Video
- Housing: Robust Coated Metal
- Power Supply: 12/24 Volt DC (9-36V)
- Dimensions: 500(W) x 325(H) x 50(D)
- Included: Remote Control
Note: Battery NOT included

Remote Control:
Figure 2: Remote control
a. Press “OPEN” button to open the monitor. Remove the metal mounting plate.
Fix the installation position and mark with a pencil.
b. Carefully mount the metal plate to vehicle’s roof.
c. Fix monitor frame to mounting frame. ( see figure 5)
d. Connect and insulate the power cables and video signal cable. (Follow “Wiring Instructions”).
6. Installation Notes:
1). Keep the machine horizontal when marking the mounting position.
2). Ensure the installation position is flat to avoid the unit twisting out of shape after installation.
Ÿ  Open the screen by hand.
Ÿ Working Voltage is DC9V-35V. Do not connect to AC 240V.
Ÿ Position the monitor away from damp and humid locations.
Ÿ  High voltage inside! Do not disassemble.
Ÿ  Installation position must be strong enough to support the unit’s weight
and vibration while driving.
Ÿ  Position the monitor away from direct sunlight or other heat sources.
Ÿ  Immediately turn off the power when liquid or objects enter the monitor.
Seek experienced technical assistance.
Ÿ Sharp objects can damage the monitor.
Ÿ  Turn off power and use a soft cloth to clean when there is dust or dirt on
the screen. Do not use solvents.
Safety Use Instructions and Precautions:
Mounting:

3. Wiring Instructions:

Figure 1
a. Power Wiring:
This product uses DC9V-35V wide power supply. Connect the power cable (Red) to car power positive
and negative cable (Black) to earth.
Note: Do not connect the monitor to AC power.
b. AV Input Wiring:
Connect the AV output cable from the vehicle’s signal source to the monitor’s AV input connector.
Yellow is AV1 input. White isAV2 Input.
c. Door Lamp Control cable Wiring:
Connect the positive door lamp control cable (Red) to the positive pole of vehicle’s power;
Negative (Black) to earth circuit and yellow cable to door control cable.
d. HDMI Wiring :
Use directly by connecting HDMI.
It may help to solve some simple faults. Please contact us if further help is needed.
Faults Solutions
Monitor couldn’t be
turned on
1. Check whether the power cable is connected properly, or reversed polarity.
2. Check that the power supply is working correctly.
Image Abnormal Check whether the video signal wire is connected properly, and whether video source
(from DVD Player) works properly
Solutions for Simple Faults:
Wire Negative (BLACK)
Lamp
Power On/Off Menu
Signal Switching
OpenNext Last Lighting Switch
Lamp
Power Wire Positive (RED)
AV1 Input (YELLOW)
AV2 Input (WHITE)
Door Lamp Control Wire (Yellow) + Trigger
Negative (BLACK)
Positive (Red)
HDMI

WARRANTY
Congratulations on your purchase of a quality Mobile Entertianment System! You’re joining
thousands of satisfied customers who enjoy & experience the benefits of the products we
distribute. In the unlikely event that some technical difficulty arises with your purchase, be
assured that we are most anxious to see that the problem is quickly rectified to your
satisfaction. Please familiarise yourself with the following simple conditions of our warranty.
This warranty covers faults through component failure or failure of the product to operate in
accordance with published specifications. Product failure as a result of unreasonable
environmental conditions, accident, misuse, improper installation, unauthorised repair, vehicle
electrical or wiring faults or neglect etc, will not be covered by this warranty. Removal and
installation costs, if any, would be paid by the owner as well as any freight or postage costs of
transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss
of use of this product or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra International Pty Ltd to be free from defects in
materials and workmanship under NORMAL USE for a period of TWENTY FOUR MONTHS
from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE: Please return the unit for replacement to our
National Service Centre or the Retailer from where you made the purchase. All accessories
must be included. Proof of purchase date
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE: Warranty repair and service is carried out by our
National Service Centre. Repair and service will be carried out at no cost to the owner if proof
of ownership and the date of purchase can be verified to the satisfaction of the authorised
centre concerned with this repair. This proof should take the form of either:
a) The warranty card accompanying this product, stamped and dated by the dealer.
b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model
number and serial number.
COMMERCIAL WARRANTY: A product used in or associated with a commercial
application will carry a limited SIX MONTH warranty. An abnormal commercial application is
one where usage, dust, vibration, heat/cold and other environmental conditions exist at an
extreme level.
Model Number: Serial Number:
Dealer Name: Date of Purchase: / /
Dealer Address:
www.audioxtra.com.au
Purchaser’s Name:
Invoice/Sales Docket no:
Purchaser’s Address:
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148Australia
Telephone: [phone] Fax: [phone]
email:[email protected]
Please complete details below in the event of warranty service being required.
General Hints: To expedite service and prompt return of the equipment, please:
a) Clearly describe the fault in detail c) Include your return address
b) Safety and security pack the unit for transport d) Provide proof of purchase date as outlined above
AX
BA1858