Axminster AT254TS User manual

AT254TS
Table Saw & Additional Tables
AT&M: 06/09/2018
BOOK REF : 007287
Code 104501
Original Instructions

Cert No: HW110LGE-30
Axminster Tools & Machinery Ltd
Axminster Devon
EX13 5PH UK
axminster.co.uk
Type Table saw
Model AT254TS conforms to the machinery example for which the
EC Type-Examination Certificate No BM50416470
has been issued by Harvey Industries Co., Ltd.
at: 01 Building, No.68 Suyuan Road, Jiangning Economic & Technological Development Zone,
Nanjing 211100 China
and complies with the relevant essential health and safety requirements.
2006/42/EC
06/42/EC - Annex I/05.2006
EN 60204-1:2006+A1+AC
EN 1870-19:2013
declares that the machinery described:-
This machine complies with the following directives:
EU Declaration of Conformity
Signed
Andrew Parkhouse
Operations Director Date: 29/08/2018

3. Machine Description
3.1 Technical parameters
Item HW110LGE-30 HW110LGE-50
Product Dimensions
weight 260Kg （approx.）
length/width/height(mm) 1582x1100x1016 2090x1100x1016
foot print(length/width) 508x508
Electrical: switch magnetic with thermal overload protection
Motor
type TEFC capacitor start induction
horsepower/voltage/phase/amps 3HP-230V-1PH 12.8A
speed/cycle 2850 RPM/50HZ
power transfer Triple V-belt Drive
blade information
maximum blade diameter 250mm
riving knife/spreader thickness 2.5mm
required blade body thickness 1.8-2.4mm
required blade kerf thickness 2.6-3.2mm
maximum width of Dado 15mm
blade tilt left 0-45°
arbor size 30mm
arbor speed 4150 RPM(50Hz)
arbor bearings sealed and permanently lubricated
cutting capacities
maximum depth of cut at 90° 70mm
maximum depth of cut at 45° 50mm
maximum rip to right of blade-standard
750mm 1250mm
maximum rip to left of blade 305mm
Table informations
floor to table height 860mm
main table--length/width/thickness 512x685x48mm
distance front of table to center of blade
440mm
distance front of table to blade of maximum cut
310mm
miter gauge information
miter gauge slot type T-slot
miter gauge slot type-- width/height 19.05 ×9.525mm
other information paint power coated
dust port size 100mm