Guidelinges beforeinstallation
• The power of this product is designed with the specification of
DC
12V
vehicle.
•
Do
not disassemble the product as
it
is water-proof.
•
Do
not wipe
or
scratch the camera lens with sharp object
as
it
may cause the
• lurriness of the image. (Repair is unavailable)
•
Do
not voluntarily cut off the wire
or
connect with other wires.
It
may cause severe
damage to electric devices of vehicle. (Repair is unavailable)
• Camera should
be
installed accurately.
• Installation of this camera may cause collision with pedestrians
or
minor collisions
with other vehicle
so
it
should not
be
installed protruding the vehicle.
• Camera lens should
be
wiped regularly with soft cloth
and
others in order to remove
external materials such as sand. snow, and others
on
the surface of camera.
• The angle of camera is subject to the vibration of vehicle. Install
it
so that
it
would not
be
shaken.
• Install
it
so that each connecter can not contact of moisture.
• This product should
be
installed at agency with expert installation technique.
• Please conduct wiring after pulling off ground wire from -terminal of battery.
•
It
may cause electric
shock
and fire.
•
Do
not connect with the outlet of other devices after cutting
or
peeling off the sheath of wire.
•
It
may cause fire
or
electric shock. (Repair is unavailable)
•
Do
not voluntarily cut off the wire
or
connect with other wires.
• Wiring shall
be
well organized so that
it
would not impede the driving of vehicle.
•
It
should
be
well tied so that
it
would not have effect on steering wheel, gearshift, brake pedal, and others.
• Do not solely depend
on
the monitor. Please carefully look around your surrounding when driving
forward
or
backward.
• Keep small parts such as screws. and others well
so
that
it
would not get lost.
•
It
may cause short circuit
or
fire when
it
small parts.screws inside the vehicle.
•
Do
not drill a hole to a vehicle for the installation.
It
may cause severe damage to the vehicle.
• Install
it
away from important parts
or
section to vehicle.
It
may cause severe damage to
performance of vehicle.
Product wiring diagram
V-OUT
(Video OUT)
~
Monitor
INTERFACE
White
REAFLCTRL
(Option)
NOT
USE
Blue
Yellow
White
Gray
FRONT
CAMERA
Violet
RCAM_
12V
OUT
(Option)
(PULSE)
(High)
(Low)
CA
M
LAMP
OUT
(R
ear
Detector
Navigation)
SPEED
CAN
Green
REAFLLAMP
(12V
In)
FRONT
CAMERA
ON/OFF
Switch
View
Mode
Change
Black
GND
Red
ACC
FUSE
(2A)
Troubleshooting
• Please
check
whether
or
not external materials are on the lens of camera installed
to the vehicle in case there is problem with the quality of image.
• Please
check
the product installation method in manual in case problem occurs
during the installation.
• Please
check
all connection of camera cable,
power
supply cable
and
video
cable,
if
no
image in screen.
• Please
check
FUSE
of
power
supply,
if
no
image in screen.
One-YearLimitedWarranty
Thiswarranty givesyou specific legal rights. You mayalso have other rights which
vary from state to state. Dual ElectronicsCorp.warrants this productto the original
purchaserto
be
free from defectsin material and workmanshipfor a periodof one
yearfrom the date of the original purchase.Dual ElectronicsCorp.agrees.at our
option.during the warranty period,to repair anydefectin material
or
workmanship
or
to furnish an equalnew, renewedor comparableproduct(whicheveris deemed
necessary)in exchangewithout charges.subjectto verificationof the defector
malfunction andproof of the date of purchase.Subsequent replacement productsare
warranted for the balanceof the originalwarranty period.
Who
is
covered? Thiswarranty is extendedto the original retail purchaserfor
productspurchased andusedin the
U.SA
What
is
covered? This warranty covers all defectsin material andworkmanship
in this product.Thefollowingare not covered: installation/removal costs, damage
resulting from accident,misuse. abuse,neglect.productmodification.improper
installation, incorrect linevoltage.unauthorized repair
or
failure to followinstructions
suppliedwith the product,
or
damage occurringduringreturn shipmentof the
product.
What to do?
1.
Before you call for service.checkthe troubleshooting guide in yourowner's manual.
A slight adjustment of anycustom controls maysave you a servicecall.
2.
If
you require service during the warranty period,you must carefully
pack
the
product(preferably in the originalpackage)andship
it
by
prepaid transportation
with a copyof the original receipt from the retailer to anauthorized service center.
3.
Pleasedescribe your problem in writing and include your name, a return
UPS
shippingaddress(P.O.Boxnot acceptable),and a daytime phone numberwith
your shipment.
4.
For more information andfor the locationof the nearest authorized service center
pleasecontact us toll-free
at1-866-382-5476or
Exclusion of Certain Damages: Thiswarranty is exclusive andin lieu of any
andall other warranties. expressedor implied,including without limitation the
implied warranties of merchantabilityandfitness for a particular purposeandany
obligation.liability,right, claim
or
remedyin contract
or
tort, whether
or
not arising
from the company's negligence, actual
or
imputed.No person
or
representativeis
authorized to assumefor the company anyother liabilityin connection with the sale
of this product.
In
noeventshall the company beliable for indirect, incidental
or
consequential damages.
Dual
Electronics Corp.
Toll
Free:
1-866-382-5476
www.axxeraaudio.com
ll:>2014 Dual Electronics Corp. All rights reserved.
NSC0103-V01
P
ri
nted In KOREA
