Axxonn FT150PWISMLID User manual

Assembly Instructions: Metal Fire Pit
FT150PWISMLID
Part List
Part List
Description
Qty.
Drawings
Part #
A
Corner Post
4
8-01-00018-01-055
B
Mantle
4
8-20-00004-01-056
C
Square Bowl
1
8-09-00018-01-055
D
Log Grate
1
8-14-00018-01-055
E
Mesh Lid
1
8-21-00022-01-055
F
Connecting Plate
4
8-06-00003-01-055
G
Ladder Frame
4
8-20-00005-01-055
H1
Bolt (M6x12mm)
8
1-05-06012-32-000
H2
Bolt (M6x15mm)
8
1-05-06015-32-000
I
Bolt (M6x12mm)
8
1-10-06012-31-000
J
Lid Ring
1
1-20-00001-01-055

K
Protective Cover
1
3-03-00001-10-055
L
Poker
1
3-06-00013-47-055
M
Allen Wrench (M4)
1
3-06-00009-01-000
N
Plastic Cap
(Pre-installed)
4
1-53-70070-07-000
Tool required: Allen Wrench (provided)
Special Warnings
This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks.
This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves or other
combustible materials in the fire pit.
NOT for use by children. Keep children and pets away from the fire pit.
Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
NEVER leave burning fire pit unattended and always extinguish fire completely before
leaving the fire pit.
Maintain a minimum of 5 FT from any structure!
DO NOT use near flammable or combustible objects or materials.
Use on a temperature safe surface.
LOG GRATE is NOT intended for cooking and SHOULD NOT be used for this purpose.
DO NOT move fire pit when in use
Operation Instructions
Place wood logs on grate and light with match. DO NOT overload logs.
Please use Poker (provided) when handling.
We do not recommend pouring water over the fire unless necessary. The fire should be
allowed to expire on its own.
Ceramic Tiles, Slate and Granite are fragile so handle with care. (for items with ceramic
tiles, slate or granite)

Care and Maintenance
This fire pit is a quality-built product and is made to last for many years.
The frame structure of this unit is made of powder-coated steel extrusion and should resist
rusting under normal use. Should rusting occur, we suggest using a steel brush on the affected
area followed by a spray coating of high temperature anti-rust paint.
For additional rust proofing of the bowl, grate and mesh lid we recommend that a coat of
high temperature primer (such as rustoleum or similar brand) is applied before use.
You may cover the fire pit with a Protective Cover ( provided) when the fire pit is not in use.
Ensure the fire pit has completely cooled down before using the Protective Cover.
Assembly Instructions
Estimated Assembly Time: 20 Minutes
DO NOT over tighten hardware!
Step 1. Place Mantle parts (B) on a soft, even clean surface with the groove sides upwards to form a square. Connect each
by using Bolts (H1). (View Fig 1)

Step 2. Attach Connecting Plates (F) to Corner Posts (A) by using Bolts (I). Tighten the Bolts (I) with an Allen Wrench (M)
(provided). Then attach the Corner Posts (A) installed Connecting Plates (F) to the Mantles (B) by using Bolts (H2).
(View Fig 2)
Step 3. Mount Ladder Frames (G) to the studs pre-installed on the Corner Posts (A). (View Fig 3)

Step 4. Tighten all the bolts accordingly with an Allen Wrench (M) (provided) until all pieces fit together securely. Then turn the
assembled fire pit frame over so that it sits securely (legs down) on a flat surface. Place Square Bowl (C) on the base and put
Log Grate (D) in the Square Bowl (C). (View Fig 4)
Step 5. Affix Lid Ring (J) to the Mesh Lid (E) by screwing the lid ring into the upper hole of the mesh lid. Then place the mesh lid
on the square bowl. (View Fig 5)
Your Fire Pit is ready for use now! Please enjoy!
For questions or warranty service DO NOT RETURN,
Email or Call Axxonn’s CUSTOMER SERVICE at [email protected]
or 1-877-229-9666 between 8:00AM to 4:30PM Eastern Standard Time,
For Warranty Service we need you to email us
1. Proof of purchase, 2. Your name, address and phone number, 3. Defective part number, 4. Item number, 5.
Picture if relevant.
Your request will be handled promptly.
PRINTED IN CHINA (141117)