AYRSTONE AyrMesh User guide

1Start Here
Quickstart Guide-
AyrMesh Router
Visit
Ayrstone.com/support
for detailed instructions,
videos, slide shows, and a
troubleshooting guide.
Check the contents of the box:
• Router
• Antenna
• Ethernet Cable
• Power Supply
Ayrstone AyrMesh
Router Setup
M
Quickstart Guide
Ayrstone.com
www.Ayrstone.com
888-837-0637
M
scan with mobile device
www.Ayrstone.com/support
1

32 Gather
What You’ll Need
Assemble
Router and Antenna
• Screw Antenna finger tight (pic.3)
onto the Antenna Connector on
the back of the Router. (pic.2)
• Do Not Use Tools.
4
•Plug one end of an Ethernet
Cable into one of the 4 LAN
ports on the back of the
Router.(pic.4)
•Plug the other end of the
Ethernet Cable into the ethernet
port on your computer.(pic.5)
5Connect
Router to Power Supply
• Plug one end of an Ethernet
Cable into the WAN port on the
back of the Router.(pic.6)
• Plug the other end of the Ether
net Cable into the plug on the
Power Supply.(pic.7)
• Plug Power Supply into wall. (pic.8)
• Router and Included Parts
• An Additional Ethernet Cable
• Computer with an Ethernet Port
• Always on Internet Connection
DSL, Cable, Satellite, etc. (not dial up)
You may also want:
• One or more AyrMesh Hubs
• Additional Ethernet Cables
(pic.3)
(pic.2)
Connect
Computer to Router
(pic.4)
(pic.5)
(pic.6)
(pic.7)
(pic.8)

67
Login o
Ayrmesh Router
• Start an Internet Browser
Internet Explorer, Firefox, Safari, Chrome, etc.
• On the URL Line type: 10.0.0.1
• Press: Enter on your keyboard
• Login Page will show on screen.(pic.9)
• Enter Username: ayrmesh
• Enter Password: ayrmesh
• Press: Login or Enter on your keyboard
If the Login page does not appear on your screen,
follow the Ayrmesh Router Troubleshooting Guide.
Set Up
Internet Connection
• Router page will show on screen.(pic.10)
• Press: Click HERE to set up your router.
(pic.10)
(pic.9)
• Setup Internet Connection page will
show on screen.(pic.11)
• Select: Your Internet Connection
DHCP, PPPoE or Static
(pic.11)
• Follow instructions for your internet connection.
DHCP
PPPoE
STATIC
• Click Next.(pic.12)
• WiFi Access page will appear on
screen. Go to step 8.
(pic.12)
• Enter PPP User Name and
Password.(pic.13)
Provided by Internet Provider.
• Does your ISP require
encryption?(pic.13)
No: Do Not check encrytion box.
Yes: Check encrytion box. (This is rare)
• Click Next.(pic.13)
• WiFi Access page will appear on
screen. Go to step 8.
(pic.13)
• Enter IP address, netmask and gateway IP
address.(pic.14)
Provided by Internet Provider.
• Click Next.(pic.14)
• WiFi Access page will appear on screen. Go to
step 8.
(pic.14)
7
Continued
7
Continued

8Set Up
WiFi Access Point
Choose: One of three options.
1.) If your AyrMesh hub provides good Wifi through
out your house.
• Select: Turn off outer’s wireless access point
• Click Next.
• Go to Step 9.
2.) If you do not have an AyrMesh Hub, or If your
AyrMesh Hub is not usable throughout your house.
(e.g. Hub is above a metal roof)
• Select: Use SSID and WPA passkey from ayrmesh.com
• Click Next.
• Go to Step 9.
3.) If you want a separate WiFi signal from your Router,
and if your AyrMesh hub provides good Wifi throughout
your house.
•Select: Configure outer’s wireless access point
as follows:
• Fill in SSID
(Name of the network. Different from your
AyrMesh SSID.)
• Select Encryption type.
Select WPA2 AES if supported by all devices.
Select WPA TKIP if you have older devices.
• Fill in Encryption Password.
Ensure you can remember it and keep it a secret.
• Fill in the Channel.
Use a channel that is at least 5 away from your
Hub’s channel. e.g. Hub is on channel 6, Router
can be set to channel 1 (default).
• Click Next.
• Go to Step 9.
8
Continued
9
10
Final Steps
• Router will reboot.
Takes about one minute.
• Login Page will show on screen.(pic.9)
If you get a timeout message click the browser’s refresh button.
• Connect: Short Ethernet cable attached to the
Power Supply to your Internet connection
device.(pic.15)
Modem, Radio or Primary Router
• Test Internet connection.
Connection is Good: Go to Step 10
Unable to Connect:
See the Ayrmesh Router Troubleshooting Guide.
Connecting to an “all in one” router/gateway device?
Put AyrMesh into the DMZ of the device:
Visit http://ayrstone.com/support for
examples.
Contact your ISP for detailed instructions.
(pic.15)
Login to
Ayrmesh.com
• Start an Internet Browser
Internet Explorer, Firefox, Safari, Chrome, etc.
• On the URL Line type: Ayrmesh.com
• If you have an Ayrmesh account:
Log In.
• If you do not have an Ayrmesh account:
Click:No username? Sign up now-it’s free
(pic.15)
• Fill in the Sign up Page
(Be sure to supply a working email address.)
On Ayrmesh.com, you can monitor and
control your Ayrmesh network.
Note: Once you set up your router it will
appear on your front page.
(pic.15)

Ayrstone AyrMesh
Router Setup
roubleshooting Guide
Ayrstone.com
www.Ayrstone.com
888-837-0637
1Start Here
roubleshooting
Guide-
AyrMesh Router
Visit
Ayrstone.com/support
for detailed instructions,
videos, slide shows, and a
troubleshooting guide.
scan with mobile device
www.Ayrstone.com/support
2
Identify
Problem
• Login Page did not show on screen.
Go to Step 3.
• Unable to connect to Internet.
Go to Step 4.
• Problem not listed above.
Go to Step 5.
1 2

Ensure:
• Router is powered on, and lights are on.
• Make sure Power Supply is connected to
Router with a separate Ethernet cable
(pic.2 & 3),
not the short cable attached to the Power
Supply.
(pic.1)
• Cables are clicked in on both ends.
• Computer is plugged into a LAN port,
not the WAN port. (LAN light should be lit)
• Computer gets IP address automatically.
Follow steps on right.
If the above steps did not resolve your issue Go To Step 5.
Windows: 7 and Vista
Open your Control Panel.
Select Networking or Network and Sharing Center.
Select Change Adapter Setting.
Right Click Local Area Connection.
Select Properties.
Select TCP IP or Internet Protocol Version 4
Select Properties
Ensure Obtain an IP address automatically is
checked.
Ensure comptuer is configured properly:
Mac:
Open System Preferences.
Select Network.
Select Ethernet.
Ensure Using DHCP is selected.
Email: suppo[email protected]om
Phone: [phone] x101
3
4 5
roubleshoot
Login Page did not show on
screen
roubleshoot
Unable to Connect to
Internet
scan with mobile device
www.Ayrstone.com/support
Contact Us
Additional Help
Visit Ayrstone.com/support
for detailed instructions, videos, slide shows,
and a troubleshooting guide.
Ensure:
• Internet access device is powered on.
• Internet access device is connected to the WAN
port.
• Reboot the Internet access device.
• Reconfigure Router connection settings.
• Connecting to an “all in one” router/gateway
device?
Put AyrMesh into the DMZ of the device:
Visit http://ayrstone.com/support for examples.
Contact your ISP for detailed instructions.
If the above steps did not resolve your issue Go To Step 5.
3
continued
(pic.2) (pic.3)
(pic.1)