Aztech MR2800-W User manual
AMR MODEM CARD
Users Manual
Version 1.2
MR2800-W
All manuals and user guides at all-guides.com
all-guides.com
P/N: 040-512404-121 (February 2001)
All manuals and user guides at all-guides.com
ContentsContents
ContentsContents
Contents
Preface .........................................................................................5
1. Introducing MR2800-W .............................................................6
2. Before You Begin ........................................................................7
2.1 Minimum System Requirements.............................................7
2.2 Safety Precaution .................................................................8
2.3 Installation Notes ................................................................8
3. Setting Up Your Modem .............................................................9
3.1 Configuring Your Modem .......................................................9
3.2 Installing Your Modem .......................................................... 11
3.3 Connecting Your Modem .......................................................14
4. Installing Your Modem Driver ...................................................15
4.1 Installing Your Modem Driver - For Windows® 95 ................... 15
4.2 Installing Your Modem Driver - For Windows® 98 / 98
Second Edition .................................................................... 18
4.3 Installing Your Modem Driver - For Windows® Me ..................20
4.4 Installing Your Modem Driver - For Windows NT® 4.0 ............22
4.5 Installing Your Modem Driver - For Windows® 2000 ...............26
5. Verifying Your Modem ................................................................29
5.1 Verifying Your Modem - For Windows® 95 / 98 / 98
Second Edition / Me.............................................................29
5.2 Verifying Your Modem - For Windows NT® 4.0 .......................31
5.3 Verifying Your Modem - For Windows® 2000 ......................... 32
6. Uninstalling Your Modem Driver ...............................................34
All manuals and user guides at all-guides.com
Appendix A - Card Layout...................................................................35
Appendix B - Frequently Asked Questions .........................................36
Appendix C - Troubleshooting Guide .................................................39
Appendix D - Technical Specifications ...............................................41
D.1 Main Features ..................................................................... 41
D.1.1 Drivers Support.......................................................... 41
D.1.2 Integrated 56000 BPS Data/Fax Modem ...................... 41
D.2 Interfaces ............................................................................ 42
D.2.1 External connectors .................................................... 42
D.3 Environmental .....................................................................42
D.3.1 Temperature: ............................................................. 42
D.3.2 Humidity ................................................................... 42
All manuals and user guides at all-guides.com
5
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1 — Introduction
Preface
This manual contains the information to guide you setup your modem successfully.
Chapter 2 - Before You Begin check through with you the minimum system requirements
needed for you to install your MR2800-W modem card. It also contains the safety and
installation notes that you need to be conscious of.
Chapter 3 - Setting Up Your Modem contains 3 sub-sections, Configuring Your Modem,
Installing Your Modem and Connecting Your Modem. Please follow strictly to the
sequence of setting up.
Chapter 4 - Installing the Modem Driver contains screen shots in every installation steps
that enable you to install your modem driver easily. The operating systems that are
supported by the driver are Windows®95, 98, 98 Second Edition, Me, NT®4.0 and
Windows®2000.
Chapter 5 - Verifying Your Modem gives instructions to verify if the modem driver has been
successfully installed.
With the sections Frequently Asked Questions (FAQ) and Troubleshooting Guide, you
should be able to setup your modem in a breeze!
For further technical details on your card, you may refer to the ReadMe.txt file found in
your MR2800-W Installation CD.
Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.
All manuals and user guides at all-guides.com
6
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Introducing MR2800-W
Congratulations on your purchase of MR2800-W Modem!
With the MR2800-W alone, you can perform a comprehensive range of modem-
related functions including data communications, sending and receiving of faxes.
The intensive demands of todays Internet applications will no longer be a bottleneck.
Using MR2800-W, you can now download graphic intensive web pages, high
bandwidth audio and video files as well as large file size software programs at speeds
of up to 56Kbps.
Chapter 1
All manuals and user guides at all-guides.com
all-guides.com
7
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2.1 Minimum System Requirements
•IBM PC-based computer with Intel®Celeron 366MHz Socket 370 processor
•1 free AMR-Bus slot
•1 CD-ROM drive
•32MB RAM
•10MB hard disk space (system files and modem drivers only)
•Windows®95 / 98 / 98 Second Edition / Me / NT®4.0 / 2000
Before You Begin
This chapter contains information that you need to know before
installing your modem. It is important that you go through them.
Chapter 2
All manuals and user guides at all-guides.com
2 — Before You Begin
8
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2.2 SafetyPrecaution
•Do not remove your card from its protective bag until you are ready to install it.
•Always try to hold your card by its edges. Avoid touching any electronic components
on your card.
•Static electricity can cause permanent damage to your card. To prevent such a
damage, you must ground yourself during the installation:
»Use a grounding strap - a coiled wire with a clip at one end and an elastic
strap at the other. Wear the strap around your wrist and attach the clip to
any non-painted metal surface of your computer chassis.
»If you do not have a grounding strap, touch any non-painted surface of your
computer chassis before you begin installation, and again every minute or so
until the installation is completed.
2.3 Installation Notes
•The graphics and screens illustrations shown in this easy start may differ from what
you see in your system, but the steps still apply.
•A screwdriver is required (to open up your computer chassis).
•The documentation for your computer should come in handy during the installation.
Have it ready by your side.
•If you have an existing non Plug-and-Play modem installed in your computer, you
must first un-install its modem driver before you remove the card. Refer to the
documentation of your existing modem for details.
If your existing modem is Plug-and-Play, you may proceed to install your new
modem.
All manuals and user guides at all-guides.com
9
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Setting Up Your Modem
This chapter contains information on how to configure, install and
connect your modem card for Internet surfing.
3.1 Configuring Your Modem
Chapter 3
MR2800-W Modem Card needs to be configured as either Primary or Secondary device
before you can proceed to install the card on your PC.
To determine the choice of configuration, you need to refer to the BIOS Setup details on
your Motherboard Users Manual. Check for the presence of AC97 Audio** setting in
the BIOS Setup. (Not all motherboards will support AC97 Audio).
1. Staticelectricity can causepermanent damage toyour card. You haveto
groundyourself duringthe installation bytouching any non-paintedsur-
face of the computer's chassis every minute or so.
2. It is important that you carry out the following steps to configure your
modem cardBEFOREproceeding to installit.
3. Power off your computer and any connected devices before connecting
your modem card!
** your system may show AC97 Audio controller
All manuals and user guides at all-guides.com
3 — Setting Up Your Modem
10
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Some systems may have additional onboard audio chips. 'AC’97Audio' and
'Onboard Audio' are two different options in the BIOS Setup. When system
is using Onboard Audio, AC'97 Audio is disabled.
a ) If AC97 Audio is present, (that is you can see it in the BIOS Setup of your
motherboard Users Manual), you may configure your card as either Primary or
Secondary device.
i) If AC97 Audio is Enabled, you must configure your card as a Secondary
device.
ii) If AC97 Audio it Disabled, you must configure your card as a Primary
device.
(See Figure 1.1 - Configuring MR2800-W Modem Card for Primary/Secondary Device)
b) If AC97 Audio is not present (that is you are not able to see it in the BIOS Setup
of your motherboard Users Manual), you must configure your card as Primary
device.
(See Figure 1.1 - Configuring MR2800-W Modem Card for Primary/Secondary Device)
Figure 1.1 - Configuring MR2800-W Modem Card for
Primary/Secondary Device
To configure as a
Primary device:
On your card, insert
the jumper onto
Pin 2 and 3 for J1.
To configure as a
Secondary device:
On your card, insert the
jumpers onto Pin 1 and
2for both J1 and J2.
All manuals and user guides at all-guides.com
3 — Setting Up Your Modem
11
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
AMR-Bus Slot
Mounting Screw
Cover Plate ·Locate the AMR-Bus slot
and remove its cover
plate. Keep the
mounting screw to
secure your card later.
3.2 Installing Your Modem
Power off your computer and any connected devices before installing your
modem!
¶Remove the cover of your computer.
All manuals and user guides at all-guides.com
all-guides.com
3 — Setting Up Your Modem
12
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
¸Align your card with the
AMR-Bus slot and firmly
push it in. If the card
does not slide in, do not
force it. Make sure that
the card is lined up
properly and try again.
¹Secure your card to your
computer chassis with the
mounting screw.
All manuals and user guides at all-guides.com
3 — Setting Up Your Modem
13
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
ºReplace the cover of
your computer.
All manuals and user guides at all-guides.com
3 — Setting Up Your Modem
14
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3.3 Connecting Your Modem
¶Connect one end of the telephone extension cable to your modem card and the
other end to your telephone wall socket.
This completes the setting up of your modem. Please proceed to the next chapter to install
your modem driver.
LINE - to Telephone Wall Socket
¶
All manuals and user guides at all-guides.com
15
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Installing Your
Modem Driver
This chapter contains information on how to install the
modem driver in Windows®95, 98, 98 Second Edition, Me,
NT®4.0 and Windows®2000.
Chapter 4
Start your Windows. Windows will
detect your newly-installed modem
and prompts for its driver.
1
4.1 Installing Your Modem Driver -
For Windows®95
Place the Installation CD into
CD-ROM drive and click Next.
All manuals and user guides at all-guides.com
4 — Installing Your Modem Driver
16
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
2
4
5
Click Other Locations... to specify
the driver path.
Click Browse... . Navigate to
'Win9x' directory on your
Installation CD and click OK.
Click OK again to proceed.
3
Click Finish to start the
installation.
At the Insert Disk
prompt, click OK.
All manuals and user guides at all-guides.com
all-guides.com
4 — Installing Your Modem Driver
17
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
This completes the driver installation in Windows®95. Please proceed to the next chapter
to verify your card.
7
To ensure your modem functions in a stable condition, check the country
setting for your modem. It has to follow the country you are currently in.
From the Control Panel (Start > Settings), double-click on the Modem
Country Selection icon.
At the Country field, select the country that you are currently in. Click Apply,
followed by OK.
6
Windows will start copying the files.
Ensure that the path specifies
'Win9x' on your Installation CD
and click OK.
All manuals and user guides at all-guides.com
4 — Installing Your Modem Driver
18
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4.2 Installing Your Modem Driver -
For Windows®98 / 98 Second Edition
3
1
2
Start your Windows. Windows will detect your newly-installed modem and prompts for its
driver.
Place the Installation CD into CD-
ROM drive and click Next.
Click the option 'Search for the
best driver for your device.
(Recommended).' and click Next.
For the source of your driver, click
the option 'Specify a location'.
Click Browse... to navigate to
'\Win9x' directory on your
Installation CD and click OK.
Click Next.
All manuals and user guides at all-guides.com
4 — Installing Your Modem Driver
19
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
5
6
This completes the driver installation in Windows®98 / 98 Second Edition. Please proceed
to the next chapter to verify your modem.
Click Next again to proceed
with the specified driver.
4
A window for Country Select will
be displayed. Select the
country that you are currently in
and click OK.
To complete the driver
installation, click Finish.
All manuals and user guides at all-guides.com
4 — Installing Your Modem Driver
20
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
4.3 Installing Your Modem Driver -
For Windows®Me
Start your Windows. Windows will detect your newly-installed modem and prompts for
its driver.
2
Place the Installation CD into
your CD-ROM drive.
Click the option 'Specify the
location of the driver
(Advanced)' and click Next.
1
Select 'Specify a location'.
Click Browse. Navigate to
'\WinMe' directory on your
Installation CD click Next.
Windows will prompt that it has
located the driver.
Click Next to proceed.
3
All manuals and user guides at all-guides.com
Other manuals for MR2800-W
2
Other Aztech Network Card manuals
