B-Tech BT8352 User manual

13
4
5
BACK FRAME
FLOOR SPACER
BASE
LEVEL
Level the Next Base
Sit the next base down to the right hand side of the first base.
Use a level across both bases and adjust feet to level base.
Attach Back Frame and Floor Spacer
Repeat steps 2 & 3.
Important: Further adjustment
of the feet may be required
to align top of spacers.
LEVEL
Note: Always build from left to right.
FLOOR SPACER

17
AA
AA
AA
Top View
iv. Use the angle and distance
measurement to set up the remaining columns.
Note: The screens can be removed during
this process to avoid damaging them.
Equal
Angles
Top View
1mm
SCREEN
There must be a 1mm gap
between the screens
Angle Guide
v. Once angle is set - Fit screws
but do not fully tighten
6mm
ALLEN KEY
vi. Ensure the screens/columns
are the correct distance apart
ANGLE
SUPPORT

20
12
Adjust to Align the Screens for a Seamless Videowall
Adjust the top row first and work down row by row.
DEPTH
ADJUSTMENT
KNOB
DEPTH
ADJUSTMENT
KNOB
HEIGHT
ADJUSTMENT
KNOB
Adjustment knobs
are also compatible
with 6mm allen key
Adjustment lines to
help with accurate
screen depth
alignment
Total Height
Adjustment is 13mm
Total Depth
Adjustment is 20mm
Note: Light pressure in
the desired direction of
travel will assist in the
adjustment of knobs when
using heavier screens
Micro-adjust
top row first
HEIGHT
ADJUSTMENT
KNOB
Up Down