manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. B-Tech
  6. •
  7. Rack & Stand
  8. •
  9. B-Tech SYSTEM X BT8341 User manual

B-Tech SYSTEM X BT8341 User manual

Other manuals for SYSTEM X BT8341

1

Other B-Tech Rack & Stand manuals

B-Tech Ventury BTV114 Instruction Manual

B-Tech

B-Tech Ventury BTV114 Instruction Manual

B-Tech BT8370-2X2 Instruction Manual

B-Tech

B-Tech BT8370-2X2 Instruction Manual

B-Tech BT882 Instruction Manual

B-Tech

B-Tech BT882 Instruction Manual

B-Tech BTF820 Instruction Manual

B-Tech

B-Tech BTF820 Instruction Manual

B-Tech BT8570 User manual

B-Tech

B-Tech BT8570 User manual

B-Tech BT8331 User manual

B-Tech

B-Tech BT8331 User manual

B-Tech BT8376 Instruction Manual

B-Tech

B-Tech BT8376 Instruction Manual

B-Tech mountlogic BT7521 Instruction Manual

B-Tech

B-Tech mountlogic BT7521 Instruction Manual

B-Tech BT8371-3X3 Instruction Manual

B-Tech

B-Tech BT8371-3X3 Instruction Manual

B-Tech SYSTEM X BT8331 Instruction Manual

B-Tech

B-Tech SYSTEM X BT8331 Instruction Manual

B-Tech 001713280-0002 Instruction Manual

B-Tech

B-Tech 001713280-0002 Instruction Manual

B-Tech Ventry BTV111 Instruction Manual

B-Tech

B-Tech Ventry BTV111 Instruction Manual

B-Tech BT8320 Instruction Manual

B-Tech

B-Tech BT8320 Instruction Manual

B-Tech BT8310-B XL Instruction Manual

B-Tech

B-Tech BT8310-B XL Instruction Manual

B-Tech BT7382 Instruction Manual

B-Tech

B-Tech BT7382 Instruction Manual

B-Tech BT8330 User manual

B-Tech

B-Tech BT8330 User manual

B-Tech AV Mounts BT8567-01 User manual

B-Tech

B-Tech AV Mounts BT8567-01 User manual

B-Tech System X BT8370-3X3-60 Instruction Manual

B-Tech

B-Tech System X BT8370-3X3-60 Instruction Manual

B-Tech BT8006 Instruction Manual

B-Tech

B-Tech BT8006 Instruction Manual

B-Tech moutlogic BT8426 Instruction Manual

B-Tech

B-Tech moutlogic BT8426 Instruction Manual

B-Tech Ventry BTV920 Instruction Manual

B-Tech

B-Tech Ventry BTV920 Instruction Manual

B-Tech BTF845 Instruction Manual

B-Tech

B-Tech BTF845 Instruction Manual

B-Tech System X BT8370-3X3-BB User manual

B-Tech

B-Tech System X BT8370-3X3-BB User manual

B-Tech Mountlogic BT8505/B Instruction Manual

B-Tech

B-Tech Mountlogic BT8505/B Instruction Manual

Popular Rack & Stand manuals by other brands

Dynex DX-MP3MT Quick setup guide

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer 24185 manual

Konig & Meyer

Konig & Meyer 24185 manual

ECG LD 326501 instruction manual

ECG

ECG LD 326501 instruction manual

Philips SB7S19S/00 quick start guide

Philips

Philips SB7S19S/00 quick start guide

Woodline KIT-250 lb instructions

Woodline

Woodline KIT-250 lb instructions

ricoo S1222 installation instructions

ricoo

ricoo S1222 installation instructions

Kanto P301 user manual

Kanto

Kanto P301 user manual

VidaBox VB MNT FFS2 installation guide

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL PLWIN60C user manual

PROEL

PROEL PLWIN60C user manual

AllMounts PLB-43S instruction manual

AllMounts

AllMounts PLB-43S instruction manual

VMP VH-001 instruction sheet

VMP

VMP VH-001 instruction sheet

Nederman SYSTEM 920/400 instruction manual

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon ORBIS POST MOUNTING KIT installation guide

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics LGR105 manual

Songmics

Songmics LGR105 manual

Grape GM401 user manual

Grape

Grape GM401 user manual

FourStarGroup 11225296 manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF FLR100 installation instructions

CHIEF

CHIEF FLR100 installation instructions

FEC XDCAM EX PMW-EX30 manual

FEC

FEC XDCAM EX PMW-EX30 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

BT8341
UNIVERSAL POP-OUT
VIDEOWALL MOUNTING SYSTEM
INSTALLATION GUIDE
www.btechavmounts.com
B-TECH AV mounts
TM
SPECIFICATIONS
• Recommended screen size: 39”- 70"
• Max weight per screen: 50kg (110lbs)
• Features pop-in, pop-out function to allow access to the rear of
screens for servicing and maintenance and to aid installation
• Tool-less micro-adjustments for seamless display alignment
• Suitable for landscape or portrait mounting
• Sections can be joined together to increase video wall width
• Safety screws help prevent unauthorised removal of screens
• All mounting hardware included
Note: This assembly manual covers dierent installations. Some
parts or procedures shown may not be required for installation.
Please refer to page 4 for VESA® xings
2
CONTENTS
Installation Safety Notes......................................................................................................................
Parts List....................................................................................................................................................
Typical Installation.................................................................................................................................
Installation Instructions.......................................................................................................................
Product Dimensions............................................................................................................................
B-Tech Contact Details.......................................................................................................................
2
4
6
7
19
20
Please pay careful attention to where this product is located. Check load capacity of the wall prior to installation to ensure
that it can support the combined weight of the equipment and hardware, some surfaces are not suitable for installation.
Warning! Secure to a solid xture, stability can be impaired if attaching to any unsecured surface or furniture.
Designed for indoor use, this mount is suitable for public or home installation. If located in a public or frequently populated
area ensure that the product is out of the immediate reach of people. f any AV equipment is to be suspended over the likely
path or location of people then great care should be taken to secure all parts of the installation from falling.
When drilling holes it is essential to avoid contact with electrical cables and water or gas pipes contained within.
Use of a good quality live wire detector and hidden object locator is therefore recommended.
Only drill into structures when you are sure it is safe to do so.
INSTALLATION & OPERATING SAFETY INSTRUCTIONS
CAUTION:
Do not attempt to install this product until all installation / operating instructions and warnings have
been read and properly understood. Please keep these instructionssafe for future reference.
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.
B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper
installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.
Check with the place of purchase for information on any guarantees, repairs or replacements of this product.
General
B-Tech AV Mounts recommends that a professional AV installer or other suitably qualied person install this product.
Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and
easily damaged if dropped.
If you do not fully understand the instructions or are not sure how to install this product safely, then please consult a
professional for advice and/or to install this product for you. Failure to mount this product correctly may cause serious
injury or death both during installation and at any time thereafter.
Do not mount any AV equipment that exceeds the specic weight limit of the product you are installing.
This weight limit will be clearly stated on each product and its packaging and will vary from product to product.
Product location
Fixing hardware
It is highly recommended that all xing screws be used where supplied and that the purpose of all other xing hardware
is fully understood. In some cases more AV equipment xing hardware will be supplied to accommodate dierent models
of equipment and set up congurations. The installer must be satised that any supplied xing hardware is suitable for
each specic installation. The xing kit supplied with the product may not be suitable for all walls.
If any xing screws or included hardware are deemed not sucient for a safe installation then please consult a professional
or your local hardware store.
Hazardlimitation
Operating & Maintenance
When routing cables take advantage of any built in cable management features thatthe product might provide and ensure
that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling.
Some products have moving parts and the potential to cause injury through the crushing or trapping of ngers or other
body parts.
Particular attention to the nature of moving parts is required especially when assembling installing and adjusting
during set up.
Immediately after installation double-check that the work done is safe and secure. Double-check all
necessary xings are present and are of ample tightness.
It is recommended that periodic inspections of the product and its xing points are made as frequently as possible (no more
than 6 months apart) to ensure that safety is maintained. B-Tech AV Mounts recommends that a suitably qualied person is
used for the removal of this product. Please dispose of the product carefully and with consideration to the environment.
If in doubt consult a professional AV installer or other suitably qualied person.
This mount is intended for use only with the
maximum weights indicated. Use with equipment heavier than the
maximum indicated may result in instability causing possible injury.
BT8341 PARTS LIST
PLEASE KEEP THIS FOR FUTURE REFERENCE
4
5
9
10
20
BT8390-WFK1
OPTIONAL
MOUNTING RAIL
EXTENSION KIT
MOUNTING RAIL
BT8390-070
Length: 70cm
BT8390-150
Length: 150cm
BT8390-175
Length: 175cm
BT8390-050
Length: 50cm
BT8390-200
Length: 200cm
BT8390-300
Length: 300cm
RAIL MOUNTING BRACKET
All these components can be moved or carried by manpower. Please be careful to avoid injury when
handling these components before & during the installation or when uninstalling the mount.
SCREEN INTERFACE ARMS
BT7564 BT7565 BT7566
VESA 600mm VESA 800mm VESA 900mm
OPTIONAL INTERFACE ADAPTOR ARMS
BT8390-VESA400MAP
1
4
7
8
Due to the multiple installations available
the quantity for each option below is
dependent on the mount ordered.
Max Load
50kg (110lbs)
Per Screen
12
14
13
BT8390-EXT
21
15
16
5
INSTALLATION TOOLS REQUIRED
Crosshead
screwdriver
PART NAME
ITEM QTY
PER PACK
1
1
22
2
3
WALL FIXING PLATE
ST8 x 45mm CSK WOOD SCREW
No.10 WALL PLUG
RAIL MOUNTING BRACKET
24
2
5
1
6
M8 SLIDING NUT
M8 x 12mm CSK SCREW
5AF HEX KEY
1
7
28
MOUNTING RAIL
END CAP
MOUNTING RAIL
6
9
24
10
1
11
RAIL EXTENSION KIT (OPTIONAL)
SCREEN INTERFACE ARMS
JOINING BAR
M6 x 8mm GRUB SCREW
3AF HEX KEY
M6 x 16mm SCREW
M6 x 40mm SCREW
M6 x 25mm SCREW
M8 x 25mm SCREW
M8 x 16mm SCREW
M8 x 40mm SCREW
13mm SPACER
5mm SPACER
24mm SPACER
4
A
4B
4C
SCREEN FIXING KIT
4
D
4
E
4
F
4
G
4
H
4
I
4
J
M6 WASHER
1
13
14
15
16
RIGHT INTERFACE ARM
2
20
4
21
ADAPTOR ARMS (OPTIONAL)
ADAPTOR ARMS
M8 x 12mm SCREW
C
D
A
DEF
HIJ
G
1
12 LEFT INTERFACE ARM
Drill Pencil Level
Stud nder
(optional)
Drill bit
10mm Masonry bit
or 4mm (5/32”) Wood bit
5AF HEX KEY
4AF HEX KEY
ADJUSTABLE BRACE
M5 x 6mm SCREW
M6 x 35mm SCREW
3AF HEX KEY
1
2
2
17
18
19
1
1
1
19
18
17
11
236
6
TYPICAL INSTALLATION
2 x 2 Videowall installation with VESA 400 Micro-Adjustment Pop-Out Arms
ASSEMBLED SIDE VIEW
Distance from
wall 105.4mm
(Tolerance
1mm)
+/-10mm Depth Adjustment
236.6mm
+/-20mm Height Adjustment
215mm
+/-20mm Height Adjustment
BT8390-VESA400MAP
BT8390-WFK1
BT8390 Rail
Centre of
BT8390 Rail
273.9mm (Tolerance
1mm)
+/-10mm Depth Adjustment
CLOSED OPEN
OPTIONAL EXTENDING THE mounting rail
COMBINING MOUNTING RAILS
7
7
9
10
9
11
7
7
Combined Mounting Rails
7
9
7
7
CHANNEL
7
BACK FRONT
JOINING BAR ASSEMBLY
9
10
i. On one side of item 7, insert 4x item 9 half-way into each channel.
ii On the back side of item 7, insert 1x item 9 in the second channel
and 1 x item 9 in the third channel - See Fig. 1
iii. Fasten item 10 loosely on each joining bar, xing it to the mounting rail.
iv. Slide the second item 7 onto item 9 and tighten all items 10, combining the rails securely.
Fig. 1
1.
INSTALLATION INSTRUCTIONS
8
ASSEMBLE WALL PLATES TO MOUNTING RAIL
i. For each item 1 used insert 2x item 4 into item 7.
1 in the top channel and 1 in the bottom channel.
4
7
4
7
9
ii. Attach item 1 to item 7 by fastening item 5 into item 4.
2pcs for up to 2000mm (0 - 79")
3pcs for 2100mm - 3500mm (80" - 139")
4pcs for 3600mm - 6000mm (140" - 239")
5pcs for 6100mm - 8000mm (240" - 319")
6pcs for 8100mm - 10000mm (320" - 400")
Required quantity of Wall Plates (item 1)
Depth
35mm (1.38")
4
5
6
BACK
1
1
7
1
7
10
WALL
Centre of
screen
marked
on wall
Centre lines aligned
when xed to wall
(Top of rail to top of rail)
Screen height +1mm
Centre of rail
INSTALLING THE MOUNT
i. Determine the centre of the rst screen at the bottom left. Mark the centre, for the centre of the rail.
2
158mm
WALL
3
ii.
ii. Mark and drill two xing holes for each item 1 assembled.
Insert item 3 and the top item 2.Do not fully tighten -
Allow a gap (approx.10mm).
iii. Hook item 1 on to item 2 using the keyholes.
Once the rail is hooked on, fasten item 2 into the
bottom holes and tighten all xings.
iv. Fit item 8 to the ends of item 7.
WALL
LEVEL
WALL
10mm
1
7
2
2.
8
10mm Masonry bit