babahu SMART 6D User manual

INSTRUCTION
MANUAL
SMART 6D
TOOTHBRUSH

INSTRUCTION
MANUAL
Before using this product, please
read the instruction manual carefully.
Save the manual for future reference.
babahu
SMART 6D
TOOTHBRUSH

02
08
10
12
13
15
16
18
22
Recharging the handpiece
Quick start guide
Cleaning the brush head
Warranty and service
Notes and precautions
Parts and configuration
Storing the toothbrush
Product features
Environmental precautions
1
2
3
4
5
6
7
8
9
CONTENTS

The charging station should be kept dry and far from
water (including bathtubs or water basins). You must
not dip the wireless charging station into water or other
liquids. After cleaning, make sure the charging station
is completely dry before connecting to a power source.
DANGER
NOTES NOTES
Before connecting the product to a power source or
outlet, please check if the product voltage is consistent
with the power being supplied by the source or outlet.
If any damage occurred to the wireless charging station,
don't use it any more. If the damage occurred to the
cable or plug of the charging station, please be sure to
replace with original accessories to avoid danger.
If any faults arise in the product (U-shape brush head,
handpiece), please stop using it. No parts can be fixed
by users themselves. If the product is damaged, please
contact the customer service center.
Don't use the wireless charging station outdoors or near
heated surfaces.
This device should not be used unsupervised by:
(1) children, or (2) people who are physically or mentally
handicapped or lack experience with or knowledge of
the device, unless they can get supervision and
instruction for the proper use of the device. Children
should always be supervised.
WARNING
PAGE 02 PAGE 03

CAUTION
NOTES
PAGE 04 PAGE 05
- Do not use this product in the bath or shower.
- If you have had oral or gum surgery in the past two
months, consult your dentist before using this product.
- The U-shape brush head of the product is composed
of medical grade silica gel. If any discomfort is caused by
using it, please consult with your dentist and buy the
hospital Pro version.
- The BBH-x1 series smart 6D toothbrush meets the
safety standard of electromagnetic equipment. For any
questions about a pacemaker or other implant, consult a
doctor or manufacturer of the implant before using the
brush.
- The product is only used for cleaning teeth and gums.
Do not use it for any other purpose. If you feel any
discomfort or pain, stop using it and contact your doctor.
- If you have medical problems, please consult your
doctor before using the smart 6D toothbrush, or use the
hospital Pro version.
- The BBH-x1 series smart 6D toothbrush is a personal
product and cannot be used by dentists in clinics or
institutions for multiple patients.
- Please stop using the U-shape brush head when it is
heavily deformed or its bristles badly bent. It is
recommended to replace the U-shape brush head every
6-12 months. If there are signs of wear, it should be
replaced sooner.
- The U-shape brush head is resistant to high
temperatures and can be cleaned in a dishwasher.
- Do not use other brush heads not recommended by
the manufacturer.
- Children should be guided when they brush their
teeth until they develop good brushing habits.
- The use of foam toothpaste is recommended, as it
rapidly spreads to all corners of the mouth and the
friction-free qualities are more gentle and suitable for
children.
NOTES
CERTIFICATION INSTRUCTIONS
Electromagnetic Field（EMF)
Babahu products comply with all relevant standards
on electromagnetic fields (EMF).
Waterproof Grade IPX7 immersion type
Soak for 30 minutes in water up to 1 meter deep
Electrical certification
Food contact level testing
GB4706.59
Environmental certification

FCC STATEMENT
NOTES
NOTES
PAGE 06 PAGE 07
This equipment has been tested and found to comply
with the limits for a WPC device, pursuant to Part 18 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
FREQUENCY BANDS AND POWER
Caution
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the product.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator and your
body. This transmitter must not be co-located or
operating in conjunction with any other antenna or
transmitter.
Operation Frequency: 134.9-174.4kHz
H-field Strength: -8.65dB n A/m @10m distance
Notes
This equipment has been tested and found to comply
with the limits for a wireless power charger, pursuant to
Part 18 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.

PAGE 08 PAGE 09
PARTS AND
CONFIGURATION
6D U-shape medical
grade silicone brush head
1
Handpiece
Wireless charging station
2
3
1
2
3
Smart color ring
Connector for the brush head
Start Button
USB plug
Charging indicator
Clean
daily cleaning indicator
Gum Care
gum cleaning indicator
Holder for brush head

QUICK START GUIDE
1
2
3
In order to maximize the effectiveness of the
smart 6D toothbrush, complete cleaning of all
parts of the mouth can be finished in 10 seconds
(the app allows you to adjust cleaning time
between 10-60 seconds). By intelligently
identifying different selected brush heads, the
smart 6D toothbrush can achieve full cleaning
and also massage gums with different comfort
levels through intelligent sensing (there are 13
different adaptive brush head schemes built into
the handpiece).
PAGE 10 PAGE 11
Rotate the U-shape
brush head into the
connector on the
handpiece. Apply the
foam toothpaste to the
grooves on either side of
the U-shape brush head.
With your teeth slightly
interlocked in the
U-shaped groove, gently
move your teeth (or brush
head) to make the
U-shape brush head fit
better. The start button
should be pointing upward
towards the upper jaw.
Press the start the button.
The U-shape brush head
will begin to clean the
teeth comprehensively.
The soft, long conical
bristles will perform a deep
clean.

The smart 6D toothbrush has 2 modes:
·Clean / Daily cleaning mode (standard mode)
·Gum Care / Gum care and cleaning mode
(gentle massaging of the gums)
·Before starting, long pressing the start button
for 1 second will switch the mode of the
toothbrush. The default is daily cleaning mode.
The smart 6D toothbrush strength control:
·10 levels of adjustable strength (via bluetooth
app)
·3 adjustable strengths (through start button)
·The default strength is 3(S) / 7(M) / 10(L) and
the duration is 20 seconds
Bluetooth app is available for the BBH-X1 Plus
edition and BBH-X1 Pro edition.
App controls functions that let you customize
your comfort.
CLEANING THE BRUSH HEAD
Clean the U-shape brush head regularly.
Rinse the U-shape brush head thoroughly after
brushing your teeth.
Dry the brush head and make sure to also remove
the water from within the grooves.
If necessary, wash the surface with neutral soap
and scrub with a soft cloth.
Do not use sharp objects to clean.
PAGE 12 PAGE 13
RECHARGING THE
HANDPIECE
Place the handpiece
on the charging station.
1
While recharging, a red light
will flash slowly.
When recharging is complete,
the light becomes bright
green and then will go out.
When the battery is fully
charged, the indicator light
will go out.
Connect the USB plug
to a power source and
recharging will start.
2
3

14
6
Do a complete charge
before the first use.
When the battery is
running low on power,
a red light will flash
quickly.
5
Notes:
1. Don't place metal objects in the groove of the
charging station. Doing so may affect the
charging process and cause the charging station
to overheat (although the charging station is
designed to detect any foreign metal objects and
prevent overheating).
2. Only one brush can be recharged on the
charging station at one time.
PAGE 14 PAGE 15
STORING THE TOOTHBRUSH
If you don't use the smart 6D tooth brush for a long
time, please disconnect the power supply from the
charging stand. Clean all parts and store them in a
cool and dry place away from direct sunlight.
Charge the handpiece once every 3 months to
condition the batteries.