BABY DELIGHT Beside Me Dreamer Installation guide

Dreamer
Beside Me
©2018 Baby Delight, Inc. 1-401-333-6800 www.babydelight.com
Bassinet and Bedside Sleeper
MADE IN CHINA
Care & Instructions
Read all instructions BEFORE assembly and USE of product. KEEP
INSTRUCTIONS FOR FUTURE USE.
A. Sleeper frame
B. Middle support frame
C. Anchors
D. Mattress with removable cover
E. Side panel
F. Side panel bar
G. Height adjustment dial
Middle support
frame (2pcs)
Sleeper frame Mattress, cover
& waterproof
sheet
Anchors
A
C C
G
D F
G
E
B
Assembly Contents
Check what you have received. Supplied loose in box:

Safety Precautions
2
SUFFOCATION HAZARD
Infants have suocated:
• In gaps between extra padding and side of the bassinet, and
• On soft bedding.
• Use only the pad provided by Baby Delight, Inc..
• Never add a pillow, comforter, or another mattress for padding.
• If a sheet is used with the pad, use only the one provided by Baby Delight, Inc..
• Never leave infant in bassinet with side down unless it is securely positioned in
sleeper mode attached to the adult bed with anchors securely in place.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on
their backs to sleep, unless otherwise advised by your physician.
• To prevent death from entrapment, bedside sleeper must be properly secured to adult bed using the attachment system.
• There must be no more than 1/2 inch (13mm) gap between bedside sleeper and adult bed.
• Check tightness before each use by pulling bedside sleeper in a direction away from adult bed.
• Ifgapexceeds1/2inch(13mm),DONOTuseproduct.Donotllthegapwithpillows,blanketsorotheritemsthatare
suocationhazards.
• Always read and follow assembly instructions for each product use mode (bedside sleeper/bassinet).
• Always use ALL required parts for each use mode (bedside sleeper/bassinet).
• To help prevent falls, do not use this product when the infant begins to push up on hands and knees, can roll over or has reached 20
lbs.,whichevercomesrst.
• Always use all required parts for each use mode (bedside sleeper/bassinet).
• Check instruction manual for a list of required parts. Periodically check product for loose, damaged, or missing parts. DO NOT
use it if any part is loose or missing, or if there are any signs of damage. DO NOT substitute parts. Contact Baby Delight, Inc. if
replacement parts or instructions are needed.
ENTRAPMENT HAZARD:
FALL HAZARD:
FAILURE TO FOLLOW THESE WARNINGS AND
THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. DO NOT USE
THIS PRODUCT IF YOU CANNOT EXACTLY FOLLOW THE INSTRUCTIONS THAT
COME WITH IT. THIS PRODUCT SHOULD BE FULLY ASSEMBLED PRIOR TO USE.
WARNING:

Safety Precautions Continued
3
• Strings can cause strangulation. NEVER place product near window blinds or patio doors with cords where a child could reach the
cord and be strangled, or hang strings over the product or place items with a string around an infant’s neck or attach strings to toys.
• DO NOT place any cord or strap or similar item in or near this product that could become wrapped around a child’s neck.
• Stringscancausestrangulation!Donotplaceitemswithastringaroundachild’sneck,suchashoodstringsorpaciercords.Do
not suspend strings over a bassinet or cradle or attach strings to toys.
• In Bassinet Mode - Assure Side Panel is locked.
WARNING - CONTINUED:
NEVER USE THIS PRODUCT IN BEDSIDE
SLEEPER MODE WITHOUT THE ANCHOR
PLATES SECURELY ATTACHED TO THE
ADULT BED
MATTRESS, BOXSPRINGS
& FRAME ALIGNED
ACCEPTABLE BED
FRAME IN-LINE
FRAME
EXTENDED
UNACCEPTABLE BED,
MATTRESS, BOXSPRING &
FRAME NOT IN-LINE
• ALWAYSraisesidewithzipper(completelyclosed)tousebassinetmode.
• ALWAYS push adult mattress against bedside sleeper after securing to bed with safety strap and anchor plates.
• NEVER leave infant in bassinet mode with sides down.
• Thisbedsidesleeperisdesignedforuseonlywithadultbedsthatarebetween18.5-24inches(47-60cm)fromoortotopof
adult mattress.
• The anchor plate and straps assembly must always be used in bedside sleeper mode. Product in bedside sleeper mode must be
tightly attached to adult bed mattress to ensure safe use.
• It is recommended to make the strap shorter than the width of the mattress to ensure bedside sleeper is pressed securely against
the adult bed, without any gaps.
• A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins to push up on hands and knees or
approximately 6 months of age. Move your child to another sleeping product when your child reaches this stage.
SUFFOCATION, ENTRAPMENT
AND FALL HAZARDS:

4
Assembly/Operating Instructions
Assembling the bassinet:
1. Lay the sleeper frame face
down on a flat surface.
Holding the central
supporting structure, open
both of the legs outward.
3. Select the middle support
frame and gently push it into
the side slots as per image
with curved bar facing down.
4. You will hear the frame
click into position once it is in
place. Make sure both sides
are securely locked into place.
CLICK!
2. Insert the side rail into
the middle support frame,
by lining up the buttons and
holes, until you hear a “click”.

5
5. Lift side panel fabric over the side bar. Inserting side bar into fabric pocket. Secure
fabric to support frame with 5 loop fasteners.
Assembly/Operating Instructions Continued
Height adjustment of the bassinet:
The bassinet can be
adjusted to dierent
height positions:
1. To adjust the height, push
the adjuster button and
then turn the cap clockwise
to lower the sleeper or
counter clockwise to raise
the sleeper. Turn the cap
to the desired height until
number is visible and an
audible “click” sound
is heard.
2. Repeat this operation on the opposite side.
3. The bedside sleeper is designed for use only with adult beds that are between 18.5
and 24 inches (45 to 55 cm) from floor to top of adult mattress.
6. Once the frame is secure,
turn the unit onto its feet.
Place the mattress with
sheet into the bassinet with
the curved edge of the
mattress facing the curved
edges of the sleeper. Your
Beside Me Bassinet is
now assembled.

6
THIS METHOD IS ONLY POSSIBLE WITH BED TYPES THAT COMPLY WITH ALL
OF THE CONDITIONS DESCRIBED IN THIS PARAGRAPH.
IN PARTICULAR, THE SIDE SUPPORT OF THE BEDSIDE SLEEPER SHOULD
ALWAYS BE PUT CLOSE TO THE PARENT’S MATTRESS AND THE MATTRESS
SHOULD ALWAYS BE ALIGNED WITH THE HEIGHT OF THE SIDE SUPPORT
FOR RESTRAINT OF THE BEDSIDE SLEEPER. FURTHERMORE, THE BEDSIDE
SLEEPER SHOULD BE FIRMLY FIXED TO THE STRUCTURE OF THE PARENT’S
BED OR TO THE MATTRESS SUPPORT.
CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN THE BEDSIDE
SLEEPER MODE DOES NOT INTERFERE WITH THE PARENT’S BED.
DURING USE, MAKE SURE THAT THE PARENT’S BED SHEETS, BLANKETS ETC,
DO NOT ENTER AND COVER THE INTERIOR OF THE BEDSIDE SLEEPER.
Bedside sleeper mode (attaching to the bed):
1. Unzip the sides of the
bedside sleeper until they are
completely unzipped.
2. Slide the top bar lock lever
away from the top bar and lift
top bar out of groove on both
sides and fold down.
Bedside Sleeping Mode (attaching to the bed):
WARNING! - IMPORTANT FOR
THE SAFETY OF YOUR CHILD:
WARNING!
WARNING!

7
IN THE BEDSIDE SLEEPER MODE THE TWO LEGS OF THE BEDSIDE SLEEPER
SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT.
ENSURE THE ANCHORS ARE STRAIGHT.
Bedside Sleeping Mode Continued
3. Move the bedside sleeper close to the parent’s bed and check the height of the
bedside sleeper compared with the mattress on the bed. The side support of the
sleeper should always be placed close to the parent’s mattress and the mattress
should always be aligned with the height of the side support for restraint of the
sleeper.
4. In order to attach the bedside sleeper to the parent’s bed in bedside sleeper
mode, use the attached pair of anchors provided.
5. Slide the anchors between the top mattress and the base across the opposite
side of the bed using a back and forth ‘sawing’ motion and at the same time pulling
downward until the straps and anchor plates are in the desired position.
6. Tighten the loop by pulling the belts firmly. Adjust the anchor straps separately
until the bedside sleeper is firmly in contact with the parent’s mattress.
NEVER USE THIS
PRODUCT IN
BEDSIDE SLEEPER
MODE WITHOUT
THE ANCHOR
PLATES SECURELY
ATTACHED TO THE
ADULT BED
MATTRESS, BOXSPRINGS &
FRAME ALIGNED
ACCEPTABLE BED FRAME
IN-LINE
FRAME EXTENDED
UNACCEPTABLE BED, MATTRESS,
BOXSPRING & FRAME NOT IN-LINE
WARNING:
WARNING:

8
Care & Cleaning
Removing the cover:
1. Remove the mattress and
release the velcro tabs from
the middle support frame on
the underside of the bassinet.
• BEFORE EVERY USE ALWAYS CHECK TO MAKE SURE THERE IS NO SPACE
BETWEEN THE PARENT’S MATTRESS AND THE SIDE OF THE SLEEPER. IF
THERE IS, PULL THE BELTS FIRMLY TO TIGHTEN UNTIL THERE’S NO SPACE
AND THE PERMITTED CONDITION OF USE HAS BEEN RESTORED.
• USE OF PRODUCT IS ONLY PERMITTED WITH BEDS AND/OR MATTRESSES
WITH STRAIGHT SIDES, USE OF THE PRODUCT WITH ROUND MATTRESS
AND OR MATTRESS OR WATER BED IS NOT PERMITTED.
• WHEN THE PRODUCT IS USED IN THE CO-SLEEPING MODE, IT SHOULD
ALWAYS BE FITTED TO THE LONG SIDE OF ACCESS TO THE BED, DO NOT FIX
THE PRODUCT TO THE BED OR BOTTOM OF THE BED.
2. Release the hook & loop
from the top rail cover of the
bedside sleeper as per image.
Locate the zipper underneath
the fabric lip of the structure
and unzip.
THE ATTACHMENT SYSTEM MUST ALWAYS
BE USED IN BEDSIDE SLEEPER MODE.
WARNING:
WARNING:

9
Care & Cleaning (Continued)
3. Gently remove the lining
from the upper tubular
structure, making sure not to
damage the internal part of
the lining.
4. Remove the sti board (behind the Baby Delight logo)
by sliding it out of the pocket on the inside of the cover.
How to Care for Your Beside Me Dreamer
Maintenance:
Cleaning:
The bassinet and the mattress have a stain resistant fabric cover which is completely
removable and washable.
The removal of the fabric should be carried out by an adult only. On a regular basis
check the condition of the product and presence of any possible damage. In the case
of damage do not use and keep it out of the reach of children.
Do not use solvents, abrasives or aggressive products. After each wash check the
resistance of the fabric and the stitching. For washing of the fabric, carefully comply
with instructions indicated on the label.

Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects in
material and workmanship existing at the time of manufacture for a period of
90-days from the date of initial purchase (sales receipt is required for proof of
purchase). If such a defect is discovered during the limited warranty period, we
will, at our sole option, repair or replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to
follow the instructions on installation, maintenance and use, abuse, alteration,
involvement in an accident, and normal wear and tear.
DO NOT use bedside sleeper if any parts are missing, damaged, or broken.
Contact for replacement parts and instructional literature if needed. DO NOT
substitute parts.
For warranty service or replacement part information:
USA: Please call Customer Service at 1-401-333-6800, email at
[e-mail], or mail Baby Delight, 30 Martin Street, Suite 3C,
Cumberland, RI 02864.
10

11

www.babydelight.com
©2018 Baby Delight, Inc. 1-401-333-6800 [e-mail]