BABY DELIGHT GoWithMe Alpine Installation guide

1
3-Point Harness
Non-skid Feet Washable Cover
3 Position Recline
Removable Toybar
Care & Instructions
©2018 Baby Delight, Inc. 1-401-333-6800 www.babydelight.com
MADE IN CHINA
Fabric
Cover
Upper
Frame
Front base
frame
ToybarBack Base
Frame
Lower Frame
Bolt (1)
Upper Frame
Screw (2)
Foot Screw (2)
Travel
bag
Contents
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE. Prior to using the product, check
that the product and all parts were not damaged during delivery. Use
from birth until baby starts trying to sit up or has reached 20 lb (9 kg),
whichever comes rst.
GoWithMe®Alpine
Deluxe Portable Bouncer

2
WARNING:
SUFFOCATION HAZARD: Babies have suocated when bouncers tipped
over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or othersoft surface.
• NEVER leave baby unattended.
To prevent injury
• NEVER adjust recline position while baby is in bouncer.
• Always check that recline adjustment is locked BEFORE each use.
This product is not intended to replace a crib or bassinet for prolonged
periods of sleep.
• Do not use this infant bouncer seat if it is damaged or broken.
• NEVER use toy bar as a handle.
FALL HAZARD: Babies have suered skull fractures falling while in and
from bouncers.
• Use bouncer ONLY on oor.
• NEVER lift or carry baby in bouncer.
To prevent falls and suocation:
• ALWAYS use restraints. Adjust to t snugly.
• STOP using bouncer when baby starts trying to sit up or has reached 20
lbs., whichever comes rst.
Assembly/Operating
12
Connect FRONT BASE FRAME to
BACK BASE FRAME with BOLT on the
underside of the frame.
Tools required: Phillips Head Screwdriver
Assembling the Bouncer
Connect the UPPER FRAME into the
LOWER FRAME until tight with UPPER
FRAME SCREW holes facing inward.

Assembly/Operating - Continued
4
Slide the FABRIC COVER over the
FRAME.
6
Attach the TOY BAR to the FRAME by
pressing clips on to the FRAME
3
Screw 2 FEET into underside of
FRAME with 2 LONG FOOT SCREWS.
5
Attach the two black elastic loops
on bottom of FABRIC COVER to the
chrome STEEL FRAME.
7
Fold chair upright.
8
Make sure the FRAME is securely
locked into the RECLINE ADJUSTER.
You should hear an audible “click”.
“CLICK!”
3

4
Assembly/Operating - Continued
1
1 2
2
Unbuckle child restraint straps and
place child in seat.
The Bouncer has a 3 position recline.
Click the FRAME BACKREST into any of the three
positions of the RECLINE ADJUSTER until FRAME
snaps into place.
To do this, squeeze the red
tab to unlock the
RECLINE ADJUSTER.
Buckle child into child restraint and
tighten straps for a snug and
secure fit.
Using the 3-point harness:
Reclining the Bouncer:
“CLICK!”
3
Push seat back forward. Pull seat back to desired
incline position.
Make sure the RECLINE
AJUSTER is locked into
the desired recline spot.
1
2
3

5
Assembly/Operating - Continued
Highest and Middle Position: up to 20lbs
Lowest Position: up to 15lbs
Recommended Positions by Weight:
1
Remove the TOY BAR flexing TOYBAR away from FRAME.
Folding the Bouncer:
3
Firmly pull the FRAME out of the RECLINE ADJUSTER by lifting the FRAME with
one hand and lift red RECLINE ADJUSTMENT tab up while folding FRAME
down flat.
4 5
6

6
Care & Cleaning
• Simply use a mild soap and damp cloth to wipe down the FRAME and
FABRIC SEAT. To machine wash FABRIC COVER, wash on gentle cycle and
hang to dry
Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects
in material and workmanship for a period of 90-days from the date of initial
purchase (sales receipt is required for proof of purchase). If such a defect is
discovered during the limited warranty period, we will, at our sole option, repair or
replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to
follow the instructions on installation, maintenance and use, abuse, alteration,
involvement in an accident, and normal wear and tear.
For warranty service or replacement part information:
Please call 1-401-333-6800, email [e-mail], or write to Consumer
Services: 30 Martin Street, Cumberland, RI 02864
Some replacement parts may be available for purchase after this limited warranty
expires. Please visit us at www.babydelight.com or call us at 1-401-333-6800
for details.

7

8www.babydelight.com ©2018 Baby Delight, Inc. 1-401-333-6800 [e-mail]