BABY DELIGHT Beside Me Dreamer Summit User manual

©2021 Baby Delight, Inc. 1-401-333-6800 www.babydelight.com
MADE IN CHINA | BD06070
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE. Do not use this product if it
is damaged or broken. Use from birth until baby starts trying to sit
up or has reached 20 lb (9 kg), whichever comes rst.
Horizontal
Crossbar
Storage
Pocket
Removable,
washable cover
Breathable
mesh walls
Adjustment Dial
Easy, tool
free assembly
Feet
Anchors to
adult bed for
added security
in bedside
sleeper mode
Care & Instructions
Contents
Middle support
frame
Front support frame
Sleeper frame
Height adjustment dial cap (2pc)
Mattress, cover &
waterproof sheet
Anchors Horizontal
Crossbar
Feet
Adjustment Dials
Please scan
QR code for
website
Beside Me™ Dreamer Summit
Bassinet and Bedside Sleeper

Safety Precautions
2
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:
• IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE, AND
ON SOFT BEDDING.
• USE ONLY THE PAD AND SHEET PROVIDED BY MANUFACTURER.
• NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING.
• NEVER LEAVE INFANT IN BASSINET WITH SIDE DOWN UNLESS IT IS
SECURELY POSITIONED IN SLEEPER MODE ATTACHED TO THE ADULT BED.
• TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS),
PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACK
TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN.
ENTRAPMENT HAZARD
• TO AVOID DEATH FROM THE INFANT’S NECK BEING CAUGHT ON THE TOP
RAIL ON THE SIDE THAT IS NEXT TO THE ADULT BED, THE TOP RAIL MUST BE
NO HIGHER THAN THE ADULT BED MATTRESS.
• TO PREVENT DEATH FROM ENTRAPMENT, BEDSIDE SLEEPER MUST BE
PROPERLY SECURED TO ADULT BED USING THE ATTACHMENT SYSTEM.
• THERE MUST BE NO MORE THAN 1/2 INCH (13MM) GAP BETWEEN BEDSIDE
SLEEPER AND ADULT BED.
• CHECK TIGHTNESS BEFORE EACH USE BY PULLING BEDSIDE SLEEPER IN A
DIRECTION AWAY FROM ADULT BED.
• IF GAP EXCEEDS 1/2 INCH (13MM), DO NOT FILL THE GAP WITH PILLOWS,
BLANKETS OR OTHER ITEMS THAT ARE SUFFOCATION HAZARDS.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH
PRODUCT USE MODE (BEDSIDE SLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE (BEDSIDE
SLEEPER/BASSINET).
• CHECK INSTRUCTION MANUAL FOR A LIST OF REQUIRED PARTS.
PERIODICALLY CHECK PRODUCT FOR LOOSE, DAMAGED, OR MISSING PARTS.
FALL HAZARD
• TO HELP PREVENT FALLS, DO NOT USE THIS PRODUCT WHEN THE
INFANT BEGINS TO PUSH UP ON HANDS AND KNEES OR HAS REACHED
MANUFACTURER’S RECOMMENDED MAXIMUM WEIGHT OF 20LBS, WHICHEVER
COMES FIRST.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH
PRODUCT USE MODE (BEDSIDE SLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE. CHECK
INSTRUCTIONS MANUAL FOR A LIST OF REQUIRED PARTS. PERIODICALLY
CHECK PRODUCT FOR LOOSE, DAMAGED OR MISSING PARTS.
FAILURE TO FOLLOW THESE WARNINGS AND
THE INSTRUCTION COULD RESULT IN SERIOUS INJURY OR DEATH.
WARNING:

3
WARNING! - CONTINUED
• RAISE SIDE WITH ZIPPER (COMPLETELY CLOSED) TO USE BASSINET MODE.
• PUSH ADULT MATTRESS AGAINST BEDSIDE SLEEPER AFTER SECURING TO
BED WITH SAFETY STRAPS.
• NEVER LEAVE INFANT IN BASSINET MODE WITH SIDES DOWN.
• THE ANCHOR PLATE AND STRAPS ASSEMBLY MUST ALWAYS BE USED IN
BEDSIDE SLEEPER MODE. PRODUCT IN BEDSIDE SLEEPER MODE MUST BE
TIGHTLY ATTACHED TO ADULT BED MATTRESS TO ENSURE SAFETY.
• IT IS RECOMMENDED TO MAKE THE STRAP SHORTER THAN THE WIDTH
OF THE MATTRESS TO ENSURE BEDSIDE SLEEPER IS PRESSED SECURELY
AGAINST THE PARENTAL BED, WITHOUT ANY GAPS.
• A BEDSIDE SLEEPER IS DESIGNED TO PROVIDE A SLEEPING AREA FOR AN
INFANT UNTIL HE OR SHE BEGINS TO PUSH UP ON HANDS AND KNEES, OR
APPROXIMATELY 5 MONTHS OF AGE, MAXIMUM WEIGHT OF 9KGS. MOVE YOUR
CHILD TO ANOTHER SLEEPING PRODUCT WHEN YOUR CHILD REACHES
THIS STAGE.
IMPORTANT!
INSERT THE MATTRESS SUPPORT STRAPS INTO HIDDEN POCKET UNDERNEATH
THE BEDSIDE SLEEPER WHEN USING IN FREESTANDING BASSINET MODE TO
AVOID ANY LOOSE HANGING STRAPS.
Assembly/Operating Instructions
1
Lay the SLEEPER FRAME face down
on a flat surface and open both of the
FRAME LEGS outward.
Plug FEET into each LEG with the
BRAKE LEVER facing inward.
Assembling the BASSINET:
2
BD06070

5
Insert SUPPORT FRAME ASSEMBLY
into FRAME on both sides until you
hear a “click” sound.
6
Place COVER over FRONT SUPPORT FRAME and secure underneath to MIDDLE
SUPPORT FRAME with three LOOP FASTENERS.
4
Assembly/Operating Instructions - Continued
3
Plug HORIZONTAL SUPPORT BAR with BUTTONS facing down into each FRAME
LEG until you hear a “click” sound.
Insert FRONT SUPPORT FRAME into
MIDDLE SUPPORT FRAME pressing
BUTTONS in until you hear a
“click” sound.
4
“CLICK!”
“CLICK!”
“CLICK!”

5
Assembly/Operating Instructions - Continued
Snap HEIGHT ADJUSTMENT DIAL CAP (you may need to rotate cap until it keys
itself in) into each side of the FRAME until it clicks in.
8
Press MATTRESS down until the
PLASTIC CLIPS on bottom of mattress
snap onto the MIDDLE
SUPPORT FRAME.
Place MATTRESS inside FRAME with
curved edge facing the curved edge of
the FRAME.
7
Height adjustment of the bassinet:
The BASSINET can be adjusted to dierent height positions:
1. To adjust the height, push the HEIGHT ADJUSTMENT DIAL BUTTON and then
turn the HEIGHT ADJUSTMENT DIAL clockwise to lower the BASSINET or counter
clockwise to raise the sleeper. Turn the cap to the desired height until number is
visible and an audible “click” sound is heard.

6
Bedside Sleeping Mode (Attaching to the Bed)
THIS METHOD IS ONLY POSSIBLE WITH BED TYPES THAT COMPLY WITH ALL
OF THE CONDITIONS DESCRIBED IN THIS PARAGRAPH.
IN PARTICULAR, THE SIDE SUPPORT OF THE CRIB SHOULD ALWAYS BE PUT
CLOSE TO THE PARENT’S MATTRESS AND THE MATTRESS SHOULD ALWAYS
BE ALIGNED WITH THE HEIGHT OF THE SIDE SUPPORT FOR RESTRAINT OF
THE BEDSIDE SLEEPER. FURTHERMORE, THE BEDSIDE SLEEPER SHOULD
BE FIRMLY FIXED TO THE STRUCTURE OF THE PARENT’S BED OR TO THE
MATTRESS SUPPORT.
CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN THE BEDSIDE
SLEEPER MODE DOES NOT INTERFERE WITH THE PARENT’S BED.
DURING USE, MAKE SURE THAT THE PARENT’S BED SHEETS, BLANKETS ETC,
DO NOT ENTER AND COVER THE INTERIOR OF THE BEDSIDE SLEEPER.
WARNING! - IMPORTANT FOR
THE SAFETY OF YOUR CHILD:
WARNING!
WARNING!
Assembly/Operating Instructions - Continued
2. Repeat this operation on the opposite side. BASSINET SHOULD ALWAYS BE SET
TO THE SAME HEIGHT ON BOTH SIDES.
3. The bedside sleeper mode of the BASSINET is designed for use only with adult
beds that are between 18.5 – 29 inches (47cm-73cm) from floor to top of
adult mattress.
“CLICK!”

7
IN THE BEDSIDE SLEEPER MODE THE TWO LEGS OF THE BEDSIDE SLEEPER
SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT.
4. In order to attach the BEDSIDE SLEEPER to the parent’s bed in BEDSIDE SLEEPER
mode, use the attached pair of ANCHORS provided.
5. Slide the ANCHORS between the top MATTRESS and the base across the opposite
side of the bed using a back and forth ‘sawing’ motion and at the same time pulling
downward until the STRAPS and ANCHORS are in the desired position.
Bedside Sleeping Mode - Continued
WARNING:
ENSURE THE ANCHORS ARE STRAIGHT.
WARNING:
Unzip the sides of the BEDSIDE
SLEEPER until they are
completely unzipped.
Slide the TOP BAR LOCK LEVER away from the TOP BAR and lift top bar out of
groove on both sides and fold down.
1
2
3. Move the BEDSIDE SLEEPER close to the parent’s bed and check the height of the
BEDSIDE SLEEPER compared with the MATTRESS on the bed. The SIDE SUPPORT
of the BEDSIDE SLEEPER should always be placed close to the parent’s MATTRESS
and the MATTRESS should always be aligned with the height of the SIDE SUPPORT
for restraint of the BEDSIDE SLEEPER.

8
• BEFORE EVERY USE ALWAYS CHECK TO MAKE SURE THERE IS NO SPACE
BETWEEN THE PARENT’S MATTRESS AND THE SIDE OF THE SLEEPER. IF
THERE IS, PULL THE BELTS FIRMLY TO TIGHTEN UNTIL THERE’S NO SPACE
AND THE PERMITTED CONDITION OF USE HAS BEEN RESTORED.
• USE OF PRODUCT IS ONLY PERMITTED WITH BEDS AND/OR MATTRESSES
WITH STRAIGHT SIDES, USE OF THE PRODUCT WITH ROUND MATTRESS
AND OR MATTRESS OR WATER BED IS NOT PERMITTED.
• WHEN THE PRODUCT IS USED IN THE BEDSIDE SLEEPER MODE, IT
SHOULD ALWAYS BE FITTED TO THE LONG SIDE OF ACCESS TO THE BED,
DO NOT FIX THE PRODUCT TO THE BED OR BOTTOM OF THE BED.
STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A
STRING AROUND A CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER
CORDS. DO NOT SUSPEND STRINGS OVER A BASSINET OR CRADLE OR
ATTACH STRINGS TO TOYS.
ADDITIONAL WARNING:
WARNING:
6. Tighten the loop by pulling the ANCHOR STRAPS firmly. Adjust the ANCHOR
STRAPS separately until the BEDSIDE SLEEPER is firmly in contact with the
parent’s MATTRESS.
NEVER USE THIS
PRODUCT IN
BEDSIDE SLEEPER
MODE WITHOUT
THE ANCHOR
PLATES SECURELY
ATTACHED TO THE
ADULT BED
MATTRESS, BOXSPRINGS &
FRAME ALIGNED
ACCEPTABLE BED FRAME
IN-LINE
FRAME EXTENDED
UNACCEPTABLE BED, MATTRESS,
BOXSPRING & FRAME NOT IN-LINE
Bedside Sleeping Mode - Continued

9
Care & Cleaning
Removing the cover:
Bedside Sleeping Mode - Continued
THE ATTACHMENT SYSTEM MUST ALWAYS
BE USED IN BEDSIDE SLEEPER MODE.
WARNING:
Remove the MATTRESS, by unfastening the LOOPS under the MATTRESS and lifting MATTRESS up
until the PLASTIC CLIPS detach from the FRAME on the underside of the BASSINET.
1
Release the hook & loop from the SIDE RAIL COVER of the BEDSIDE SLEEPER as per
image. Locate the ZIPPER underneath the fabric lip of the structure and unzip.
2
Gently remove the COVER from the upper tubular structure, making sure not to
damage the internal part of the lining.
3

www.babydelight.com
©2021 Baby Delight, Inc. 1-401-333-6800 [e-mail]
MADE IN CHINA | BD06070
Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects in
material and workmanship existing at the time of manufacture for a period of
90-days from the date of initial purchase (sales receipt is required for proof of
purchase). If such a defect is discovered during the limited warranty period, we will,
at our sole option, repair or replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to follow
the instructions on installation, maintenance and use, abuse, alteration, involvement
in an accident, and normal wear and tear.
DO NOT use bedside sleeper if any parts are missing, damaged, or broken. Contact
for replacement parts and instructional literature if needed. DO NOT substitute parts.
For warranty service or replacement part information:
USA: Please call Customer Service at 1-401-333-6800, email at consumercare@
babydelight.com, or mail 30 Martin Street, Suite 3C, Cumberland, RI 02864.
How to Care for Your Beside Me Dreamer
Maintenance:
Cleaning:
The BASSINET and the MATTRESS have a stain resistant FABRIC COVER which is
completely removable and washable. The removal of the FABRIC COVER should be
carried out by an adult only. On a regular basis check the condition of the product
and presence of any possible damage. In the case of damage do not use and keep it
out of the reach of children.
Do not use solvents, abrasives or aggressive products. After each wash check the
resistance of the fabric and the stitching. For washing of the fabric, carefully comply
with instructions indicated on the label.