BABY DELIGHT Beside Me Dreamer Installation guide

Dreamer
Beside Me
©2018 Baby Delight, Inc. 1-401-333-6800 www.babydelight.com
Bassinet and Bedside Sleeper
MADE IN CHINA
Care & Instructions
ATTENTION! PLEASE READ THE FOLLOWING INSTRUCTIONS AND
WARNINGS THOROUGHLY FOR THE CONTINUED WELL-BEING OF YOUR INFANT!

Safety Precautions
FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTION COULD
RESULT IN SERIOUS INJURY OR DEATH.
2
SUFFOCATION HAZARD
INFANTS HAVE SUFFOCATED:
• IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE, AND ON SOFT BEDDING.
• USE ONLY THE PAD AND SHEET PROVIDED BY MANUFACTURER.
• NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING.
• NEVER LEAVE INFANT IN BASSINET WITH SIDE DOWN UNLESS IT IS SECURELY POSITIONED IN SLEEPER
MODE ATTACHED TO THE ADULT BED.
• TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS), PEDIATRICIANS RECOMMEND
HEALTHY INFANTS BE PLACED ON THEIR BACK TO SLEEP, UNLESS OTHERWISE ADVISED BY
YOUR PHYSICIAN.
ENTRAPMENT HAZARD
• TO PREVENT DEATH FROM ENTRAPMENT, BEDSIDE SLEEPER MUST BE PROPERLY SECURED TO ADULT
BED USING THE ATTACHMENT SYSTEM.
• THERE MUST BE NO MORE THAN 1/2 INCH (13MM) GAP BETWEEN BEDSIDE SLEEPER AND ADULT BED.
• CHECK TIGHTNESS BEFORE EACH USE BY PULLING BEDSIDE SLEEPER IN A DIRECTION AWAY FROM
ADULT BED.
• IF GAP EXCEEDS 1/2 INCH (13MM), DO NOT FILL THE GAP WITH PILLOWS, BLANKETS OR OTHER ITEMS
THAT ARE SUFFOCATION HAZARDS.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH PRODUCT USE MODE
(BEDSIDESLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE (BEDSIDE SLEEPER/BASSINET).
• CHECK INSTRUCTION MANUAL FOR A LIST OF REQUIRED PARTS. PERIODICALLY CHECK PRODUCT FOR
LOOSE, DAMAGED, OR MISSING PARTS.
FALL HAZARD
• TO HELP PREVENT FALLS, DO NOT USE THIS PRODUCT WHEN THE INFANT BEGINS TO PUSH UP ON
HANDS AND KNEES OR HAS REACHED MANUFACTURER’S RECOMMENDED MAXIMUM WEIGHT OF
20LBS, WHICHEVER COMES FIRST.
• ALWAYS READ AND FOLLOW ASSEMBLY INSTRUCTIONS FOR EACH PRODUCT USE MODE (BEDSIDE
SLEEPER/BASSINET).
• ALWAYS USE ALL REQUIRED PARTS FOR EACH USE MODE. CHECK INSTRUCTIONS MANUAL FOR A LIST
OF REQUIRED PARTS. PERIODICALLY CHECK PRODUCT FOR LOOSE, DAMAGED OR MISSING PARTS.
WARNING!
• RAISE SIDE WITH ZIPPER (COMPLETELY CLOSED) TO USE BASSINET MODE.
• PUSH ADULT MATTRESS AGAINST BEDSIDE SLEEPER AFTER SECURING TO BED WITH SAFETY STRAPS.
• NEVER LEAVE INFANT IN BASSINET MODE WITH SIDES DOWN.
• THE ANCHOR PLATE AND STRAPS ASSEMBLY MUST ALWAYS BE USED IN BEDSIDE SLEEPER MODE.
PRODUCT IN BEDSIDE SLEEPER MODE MUST BE TIGHTLY ATTACHED TO ADULT BED MATTRESS TO
ENSURE SAFETY.
• IT IS RECOMMENDED TO MAKE THE STRAP SHORTER THAN THE WIDTH OF THE MATTRESS TO ENSURE
BEDSIDE SLEEPER IS PRESSED SECURELY AGAINST THE PARENTAL BED, WITHOUT ANY GAPS.
WARNING!

Assembly Contents
Check what you have received. Supplied loose in box:
A. Sleeper frame
B. Middle support frame
C. Anchors
D. Mattress with removable cover
E. Side panel
F. Side panel bar
G. Height adjustment dial
Middle support
frame (2pcs)
Sleeper frame Mattress with
removable cover
Anchors
3
• A BEDSIDE SLEEPER IS DESIGNED TO PROVIDE A SLEEPING AREA FOR AN INFANT UNTIL HE OR SHE
BEGINS TO PUSH UP ON HANDS AND KNEES, OR APPROXIMATELY 6 MONTHS OF AGE. MOVE YOUR CHILD
TO ANOTHER SLEEPING PRODUCT WHEN YOUR CHILD REACHES THIS STAGE.
IMPORTANT!
INSERT THE MATTRESS SUPPORT STRAPS INTO HIDDEN POCKET UNDERNEATH THE BEDSIDE SLEEPER
WHEN USING IN FREESTANDING BASSINET MODE TO AVOID ANY LOOSE HANGING STRAPS.
WARNING! - Continued
A
C
G
D
G
E
B

4
Assembly/Operating Instructions
Assembling the bassinet:
1. Lay the sleeper frame face
down on a flat surface.
Holding the central
supporting structure, open
both of the legs outward.
3. Select the middle support
frame and gently push it into
the side slots as per image
with curved bar facing down.
4. You will hear the frame
click into position once it is in
place. Make sure both sides
are securely locked into place.
CLICK!
2. Insert the side rail into
the middle support frame,
by lining up the buttons and
holes, until you hear a “click”.

5
5. Lift side panel fabric over the side bar. Inserting side bar into fabric pocket. Secure
fabric to support frame with 5 loop fasteners.
Assembly/Operating Instructions Continued
Height adjustment of the bassinet:
The bassinet can be
adjusted to dierent
height positions:
1. To adjust the height, push
the adjuster button and
then turn the cap clockwise
to lower the sleeper or
counter clockwise to raise
the sleeper. Turn the cap
to the desired height until
number is visible and an
audible “click” sound
is heard.
2. Repeat this operation on the opposite side.
6. Once the frame is secure,
turn the unit onto its feet.
Place the mattress into the
bassinet with the curved
edged of the mattress
facing the curved edges of
the sleeper. Your Beside
Me Bassinet is now
assembled.

6
THIS METHOD IS ONLY POSSIBLE WITH BED TYPES THAT COMPLY WITH ALL OF THE CONDITIONS
DESCRIBED IN THIS PARAGRAPH.
IN PARTICULAR, THE SIDE SUPPORT OF THE CRIB SHOULD ALWAYS BE PUT CLOSE TO THE PARENT’S
MATTRESS AND THE MATTRESS SHOULD ALWAYS BE ALIGNED WITH THE HEIGHT OF THE SIDE SUPPORT
FOR RESTRAINT OF THE BEDSIDE SLEEPER. FURTHERMORE, THE BEDSIDE SLEEPER SHOULD BE FIRMLY
FIXED TO THE STRUCTURE OF THE PARENT’S BED OR TO THE MATTRESS SUPPORT.
WARNING! - IMPORTANT FOR
THE SAFETY OF YOUR CHILD:
CHECK TO MAKE SURE THAT THE BEDSIDE SLEEPER IN THE BEDSIDE SLEEPER MODE DOES NOT
INTERFERE WITH THE PARENT’S BED.
WARNING:
DURING USE, MAKE SURE THAT THE PARENT’S BED SHEETS, BLANKETS ETC, DO NOT ENTER AND COVER
THE INTERIOR OF THE BEDSIDE SLEEPER.
WARNING:
Bedside sleeper mode (attaching to the bed):
1. Unzip the sides of the
bedside sleeper until they are
completely unzipped.
2. Slide the top bar lock lever
away from the top bar and lift
top bar out of groove on both
sides and fold down.
Bedside Sleeping Mode (attaching to the bed):

7
In the bedside sleeper mode the two legs of the bedside sleeper should
always be adjusted to the same height.
WARNING:
Ensure the anchors are straight.
WARNING:
Bedside Sleeping Mode Continued
3. Move the bedside sleeper close to the parent’s bed and check the height of the
bedside sleeper compared with the mattress on the bed. The side support of the
sleeper should always be placed close to the parent’s mattress and the mattress
should always be aligned with the height of the side support for restraint of the
sleeper.
4. In order to attach the bedside sleeper to the parent’s bed in bedside sleeper
mode, use the attached pair of anchors provided.
5. Slide the anchors between the top mattress and the base across the opposite
side of the bed using a back and forth ‘sawing’ motion and at the same time pulling
downward until the straps and anchor plates are in the desired position.
6. Tighten the loop by pulling the belts firmly. Adjust the anchor straps separately
until the bedside sleeper is firmly in contact with the parent’s mattress.
NEVER USE THIS
PRODUCT IN
BEDSIDE SLEEPER
MODE WITHOUT
THE ANCHOR
PLATES SECURELY
ATTACHED TO THE
ADULT BED
MATTRESS, BOXSPRINGS &
FRAME ALIGNED
ACCEPTABLE BED FRAME
IN-LINE
FRAME EXTENDED
UNACCEPTABLE BED, MATTRESS,
BOXSPRING & FRAME NOT IN-LINE

8
Care & Cleaning
Removing the cover:
1. Remove the mattress and
release the velcro tabs from
the middle support frame on
the underside of the bassinet.
• Before every use always check to make sure there is no space
between the parent’s mattress and the side of the sleeper. If there
is, pull the belts rmly to tighten until there’s no space and the
permitted condition of use has been restored.
• Use of product is only permitted with beds and/or mattresses
with straight sides, use of the product with round mattress and or
mattress or water bed is not permitted.
• When the product is used in the co-sleeping mode, it should always
be tted to the long side of access to the bed, do not x the product
to the bed or bottom of the bed.
WARNING:
2. Release the hook & loop
from the top rail cover of the
bedside sleeper as per image.
Locate the zipper underneath
the fabric lip of the structure
and unzip.

9
Care & Cleaning
3. Gently remove the lining
from the upper tubular
structure, making sure not to
damage the internal part of
the lining.
4. Remove the sti board (behind the Baby Delight logo)
by sliding it out of the pocket on the inside of the cover.
How to Care for Your Beside Me Dreamer
Maintenance:
Cleaning:
The bassinet and the mattress have a stain resistant fabric cover which is completely
removable and washable.
The removal of the fabric should be carried out by an adult only. On a regular basis
check the condition of the product and presence of any possible damage. In the case
of damage do not use and keep it out of the reach of children.
Do not use solvents, abrasives or aggressive products. After each wash check the
resistance of the fabric and the stitching. For washing of the fabric, carefully comply
with instructions indicated on the label.

10
www.babydelight.com
©2018 Baby Delight, Inc. 1-401-333-6800 [e-mail]
Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects in
material and workmanship existing at the time of manufacture for a period of
90-days from the date of initial purchase (sales receipt is required for proof of
purchase). If such a defect is discovered during the limited warranty period, we
will, at our sole option, repair or replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to
follow the instructions on installation, maintenance and use, abuse, alteration,
involvement in an accident, and normal wear and tear.
For warranty service or replacement part information:
USA: Please call Customer Service at 1-401-333-6800, email at
[e-mail], or mail 30 Martin Street, Suite 2A4, Cumberland,
RI 02864.