Baby Relax CRIB CHANGER COMBO 2 IN 1 CRIB User manual

KEEP FOR FUTURE REFERENCE.
Lot number:
NOTE:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
_____________________________________
(TAKEN FROM CARTON)
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
UPC CODE:
Date of purchase:
DOREL ASIA
Model No:
DA6790 (GREY)
CRIB CHANGER COMBO
2 IN 1 CRIB
0-65857-16721-4
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

WARNING
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*NEVER use bed with children under 15 months or over 50 lbs.
*ALWAYS follow assembly instructions.
*
*NEVER suspend strings over a bed.
*
*CAUTION
Infants can suffocate in gaps between crib sides and a mattress that is too small.
Follow warnings on all products in a crib.
INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head
and neck of a small child.
NEVER place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier cords. These
items can catch on bed parts.
ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed shall be a full-size crib mattress at
least 51-5/8 inches (1310 mm) in length, 27-1/4 inches (690 mm) in width, and a max thickness of 6 inches (150 mm).
STRANGUALTION HAZARD. NEVER place bed near windows where cords from blinds or drapes may strangle a child.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys and
other objects that could serve as steps for climbing out.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES (69CM BY
131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp edges before
assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are
missing, damaged or broken. Contact a customer service representative at 1-800-295-1980 for replacement parts and
instructional literature if needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
Stop using the crib when child begins to climb out or reaches the height of 35 inches (89 cm).
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise
advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as hood strings or pacifier
cords. DO NOT suspend strings over a crib or attach strings to toys.
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: [email protected]
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
Convertible Crib
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed
description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

*
*
*
*
*
*
*
*
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to product finish.
*DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
* Estimated assembly time: 60 minutes.
Check bolts/screws periodically and tighten them if necessary.
DO NOT use the changing table if it is damaged or broken.
When used as a changing table, this unit must be used with a changing pad (not provided) equipped with
safety straps that secure the child to the changing pad as well as straps that secure the pad to the
changing table.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. This warranty gives you specific legal rights and
you may also have other rights which vary from State to State.
Always secure the child to the changing pad using safety straps attached to changing pad.
The maximum recommended weight of the child is 30 lbs (13.60 kgs).
The changing table is to be used with a changing pad measuring 16 inches X 32 inches and not
exceeding 2 inches in thickness (excluding the height of any contoured edges).
WARNING
Changing Table
FALL HAZARD - To prevent death or serious injury, always keep child within arm's reach.
Avoid serious injury. Never leave child unattended.
Read all instructions before use of the changing table. KEEP INSTRUCTIONS FOR FUTURE USE.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
NOTES
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.
MAINTENANCE
changing table.

HARDWARE LIST
1 2
3 4
5 6
7
CRIB CHANGER COMBO
DA6790
BOLT
10 PCS
BOLT
2 PCS
BOLT
8 PCS
MATTRESS SUPPORT BOLT
16 PCS
BARREL NUT
8 PCS
WOOD DOWEL
14 PCS
Ø1/4" X 13mm X 15mm
ALLEN KEY
1 PC
Ø1/4" X 13mm X 75mm
Ø1/4" X 13mm X 60mm
Ø1/4" X 13mm X 55mm
Ø8mm X 30mm
Ø1/4" X 13mm X Ø10mm

PARTS LIST
A B C D
E F G H
I J K L
M N
MIDDLE BACK RAIL
1 PC
BOTTOM FRONT RAIL
1 PC
CHANGER'S PANEL
3 PCS
TOP BACK RAIL
1 PC
TOP FRONT RAIL
1 PC
MIDDLE FRONT RAIL
1 PC
BACK PANEL
1 PC
LEFT SIDE PANEL
1 PC
FRONT PANEL
1 PC
DA6790
CRIB CHANGER COMBO
FRONT RAIL
1 PC
MATTRESS SUPPORT
1 PC
RIGHT SIDE FRAME
1 PC
RIGHT SIDE PANEL
1 PC
BOTTOM BACK RAIL
1 PC

NOTE: When inserting bolts, turn clockwise until tight. Then loosen
1/2 - 3/4 of a turn. After crib is completely assembled, return to each
bolt and tighten. Use wax or soap on all bolts to facilitate assembly.
CRIB CHANGER COMBO
DA6790
CRIB ASSEMBLY INSTRUCTION

STEP 1
CRIB CHANGER COMBO
DA6790
Insert barrel nuts (6) into back panel (C ) as shown.
Attach left side panel (A)and right side panel (B) to back panel (C) with bolts (1).
Use Allen Key (7) to tighten all bolts (1).
1 6

STEP 2
Attach mattress support (F) to the posts with mattress support bolts (5).
Use Allen Key (7) to tighten the mattress support bolts (5).
CRIB CHANGER COMBO
DA6790
INCORRECT-
Raised edge
should face
down -this
photo shows
mattress
support is
INCORRECT-
Tabs on corners
of mattress
support should
point up.
CORRECT
*Tabs to point UP.
*Flat surface of mattress
support to face up -
mattress must sit on flat
surface.

NOTE: The above photos and drawings showing how to properly attach the
mattress support are for reference only. Crib styles and colors will vary.
5

STEP 3
Insert wood dowels (4) into left side panel (A) and right side panel (B).
CRIB CHANGER COMBO
DA6790
insert barrel nuts (6) into front rail € as shown.
Attach front rail (E) to left side panel (A) and right side panel (B) with bolts (1).
Use Allen Key (7) to tighten all bolts (1).
146

STEP 4
Use Allen Key (7) to tighten all bolts (1, 2 & 3).
CRIB CHANGER COMBO
DA6790
Insert barrel nuts (6) into front panel (D) as shown.
Attach front panel (D) to left side panel (A) and right side panel (B) with bolts (1 and 3) as
shown.
Secure front panel (D) to front rail (E) with bolts (2).
3
2
1
6

STEP 5
CRIB CHANGER COMBO
DA6790
Attach top back rail (H) and top front rail (K) to right side panel (B) with bolts (3).
Use Allen Key (7) to tighten all bolts (3).
Insert wood dowel (4) into bottom back rail (J). Secure bottom back rail (J) to right side frame
(B) using bolts (3).
Attach bottom front rail (M) to right side panel (B) with bolt (3).
Insert wood dowels (4) into middle back rail (I) and middle front rail (L) and attach them to right
side panel (B).
34

STEP 6
CRIB CHANGER COMBO
DA6790
Slide changer panels (N) into the grooves of rails as shown below.
Make sure changer panels (N) rest inside the grooves of right side panel (B).

STEP 7
CRIB CHANGER COMBO
DA6790
Insert wood dowels (4) into top back rail (H), middle back rail (I), top front rail (K), and middle
front rail (L).
Attach right side frame (G) to the assembled unit with bolts (3).
Use Allen Key (7) to tighten all bolts.
34

WARNINGS:
*
CAUTION- ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
*The day bed is not intended for children under 15 months of age or over 50 lbs (22.7 kgs).
STEP1: Follow steps backward from 7 to 5 to remove changer with Allen Key (7).
STEP 2: Unscrew the bolts (2) underneath the crib front rail (E) with Allen Key (7).
STEP 3: Detach the front panel (D) from left/right side panel (A & B) with Allen Key (7).
STEP 3: If mattress support (F) is not in the lowest position, unscrew bolts (5) from left/right
panel (A & B) and move to the lowest position.
STEP 4: Ensure all bolts are tightly secured.
CRIB CHANGER COMBO
DA6790
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB

That's it ! You've finished assembling your crib changer combo!
CRIB CHANGER COMBO
DA6790
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products
and/or products heavier than the maximum weights indicated may
result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]om
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
NOTE:
DO NOT throw away this
instruction manual. Use the
crib pouch attached to the
mattress support to store this
manual for future use.
The maximum
recommended weight of the
child is 30 lbs (13.60 kgs).
Stop using crib when
child begins to climb out
or reaches the height of
35 inches (89 cm).
Maximum weighty
per shelf 10 lbs

MODEL #: DA6790
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [email protected]
Customer Service Fax Number 514-353-7819