Baby Relax DA7608-1SIL User manual

Model No:
UPC CODE:
NOTE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
THIS INSTRUCTION BOOKLET
0-65857-17375-8
INSTRUCTION MANUAL
DA7608-1SIL (White)
6-Drawer Dresser
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
Date of purchase:
_______ / _______ / _______
KEEP FOR FUTURE REFERENCE.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of
charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]

*
*
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screw driver is not included.
*
*
*
*
*
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent tipover:
* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
CARE AND CLEANING
Assembly will require two people.
Estimated assembly time: 60 minutes.
To avoid unnecessary damage, when levelers have been extended, DO NOT drag across surface
when moving. Be sure to lift and carry the item to its location.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
Check bolts/screws periodically and tighten them if necessary.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally
to clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive
exposure to sunlight and extreme changes in temperature and moisture can damage wood furniture.
MAINTENANCE
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy
any such defect. This warranty covers 1 year from the date of original purchase. This warranty is valid
only upon presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty does not apply to any
product which has been improperly assembled, subjected to misuse or abuse or which has been altered
or repaired in any way. This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
LIMITED WARRANTY
WARNING
WARNINGWARNING
WARNING
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
Customer Service Department No. 413
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
12345 Albert-Hudon Boulevard, Suite 100
CAUTION: Adult assembly required.
DO NOT use power tools.
Montreal, Quebec
E-MAIL: da[email protected]m
Canada H1G 3L1
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a soft, smooth surface to prevent damage to the product finish.

HARDWARE LIST
123
456
789
10 11 12
SHORT BOLT
6 PCS
KNOB
6 PCS
SAFETY STRAP
1 KIT
LONG BOLT
7 PCS
FLAT WASHER
6 PCS
Ø3 X 15mm
SCREW
16 PCS
Ø1/4 X 1mm Ø4 X 25mm
SPRING WASHER
6 PCS
SCREW
52 PCS
Ø5/32" x 32mm
6-Drawer Dresser
DA7608-1SIL
Ø1/4 X 15 X 1.5mm
Ø8 X 30mm
CAM LOCK
14 PCS
WOOD DOWEL
31 PCS
1/4" x 32mm
CAM BOLT
14 PCS
ALLEN KEY
1 PC

PARTS LIST
A B C D
E F G H
I J K L
M N O P
TOP DRAWER RIGHT SIDE
1 PC
TOP DRAWER BACK
SUPPORT LEG TOP PANEL
1 PC
DRAWER BOTTOM
2 PCS1 PC
6-Drawer Dresser
DA7608-1SIL
2 PCS 2 PCS
6 PCS 2 PCS
TOP DRAWER LEFT SIDE
LEFT SIDE PANELRIGHT SIDE PANEL
TOP DRAWER FRONT
BACK TOP RAIL
1 PC
BACK TOP PANEL
1 PC
FRONT MIDDLE RAIL
2 PCS
MIDDLE PANEL
1 PC
BACK BOTTOM PANEL
1 PC 1 PC
FRONT TOP RAIL
1 PC
1 PC
FRONT BOTTOM RAIL

PARTS LIST
Q R S T
6-Drawer Dresser
DA7608-1SIL
BOTTOM DRAWER BACK-
4 PCS
BOTTOM DRAWER RIGHT
SIDE- 4 PCS
BOTTOM DRAWER LEFT
SIDE- 4 PCS
BOTTOM DRAWER FRONT -
4 PCS

STEP 1
6-Drawer Dresser
DA7608-1SIL
Insert cam bolt (1) into the back bottom panel (A) as shown.
Insert cam locks (3) into the bottom middle panel (B).
Attach bottom middle panel (B) to back bottom panel (A) with wood dowels (2) as shown. Secure
the bottom middle panel (B) by rotating the cam lock (3) 1/2 turn clockwise using a Phillips head
screwdriver (not included).

STEP 2
6-Drawer Dresser
DA7608-1SIL
Insert cam bolts (1) into front bottom rail (C ), front middle rails (D), front top rail (E ) and back
top rail (F) as shown.

STEP 3
6-Drawer Dresser
DA7608-1SIL
Insert cam lock (3) into the middle panel (B) as shown.
Attach front bottom rail (C) to the middle panel (B) with wood dowel (2) as shown. Secure the rail
by rotating the cam lock (3) on middle panel (B) 1/2 turn clockwise using a Phillips head
screwdriver (not included).

STEP 4
6-Drawer Dresser
DA7608-1SIL
Insert cam locks (3) into the middle panel (B) as shown.
Attach front middle rails (D) to the middle panel (B) by rotating the cam lock (3) on middle
panel (B) 1/2 turn clockwise using a Phillips head screwdriver (not included).

STEP 5
6-Drawer Dresser
DA7608-1SIL
Insert cam locks (3) and wood dowels (2) into the middle panel (B) as shown.
Attach front and back top rails (E & F) to the middle panel (B) by rotating the cam locks
(3) on middle panel (B) 1/2 turn clockwise using a Phillips head screwdriver (not

STEP 6
Insert cam bolts (1) into the right & left side panels (G & H) as shown.
6-Drawer Dresser
DA7608-1SIL

STEP 7
6-Drawer Dresser
DA7608-1SIL
Insert wood dowels (2) and cam locks (3) into the side panels (G and H), front top and bottom rails
(C and E) and back bottom panel (A) as shown.
Attach side panels (G & H) to the assembled unit.
Secure side panels (G & H) to the assembled unit by rotating the cam locks (3) 1/2 turn clockwise
using a Phillips head screwdriver (not included).

STEP 8
6-Drawer Dresser
DA7608-1SIL
Attach support leg (I) to the middle panel (B) with long bolt (4) and wood dowels (2) as shown.
Use Allen key (5) to tighten the bolts.
NOTE- The support leg (I) and side panels (G & H) are equipped with adjustable levelers. Once
assembly is complete and the unit is in the desired location, rotate the adjustable levelers clockwise
or counterclockwise until it rests evenly on the floor.

STEP 9
6-Drawer Dresser
DA7608-1SIL
Insert wood dowels (2) into the side and middle panels (B, G & H) as shown.
Place top panel (J) on the assembled unit.
Secure top panel (J) to the assembled unit with screws (8), long bolts (4), flat washers (6), spring
washers (7) and Allen key (5). Use a Phillips head screwdriver (not included) to tighten the screws
(8).

STEP 10
6-Drawer Dresser
DA7608-1SIL
Attach back top panel (K) to the assembled unit with screws (9) as shown.
Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 11
6-Drawer Dresser
DA7608-1SIL
Attach top drawer left and right sides (M & N) to top drawer front (L). Secure the drawer sides using
a Phillips head screwdriver (not included).
Slide the drawer bottom (O) into the grooves of top drawer left and right sides (M & N) and top
drawer front (L).

STEP 12
Use a Phillips head screwdriver (not included) to tighten the screws.
6-Drawer Dresser
DA7608-1SIL
Attach top drawer back (P) to the drawer sides (M & N) with screws (8).
Attach knob (11) to the drawer front (L) with bolt (10).
Use a Phillips head screwdriver (not included) to tighten the bolt.
Repeat steps 11 and 12 to assemble another top drawer.

STEP 13
6-Drawer Dresser
DA7608-1SIL
Attach bottom drawer left and right sides (R & S) to top drawer front (Q). Secure the drawer sides
using a Phillips head screwdriver (not included).
Slide the drawer bottom (O) into the grooves of bottom drawer left and right sides (R & S) and
bottom drawer front (Q).

STEP 14
Use a Phillips head screwdriver (not included) to tighten the screws.
6-Drawer Dresser
DA7608-1SIL
Attach bottom drawer back (T) to the drawer sides (R & S) with screws (8).
Attach knob (11) to the drawer front (Q) with bolt (10).
Use a Phillips head screwdriver (not included) to tighten the bolt.
Repeat steps 13 and 14 to assemble the other bottom drawers.
T

STEP 15
Insert all the drawers into the assembled unit.
6-Drawer Dresser
DA7608-1SIL