Babybee pod User manual

PRODUCT MANUAL
The Babybee POD is designed and tested to comply with: ASTM F2906-13 (2019),
ASTM F2194-16e1, EN 1130:2019, AS/NZS 8811.1:2013 & EN 16890:2017+A1:2021
IMPORTANT! READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE
PRODUCT MANUAL
POD BASSINET &
BEDSIDE SLEEPER

3.
9.
10.
11.
12.
13.
17.
17.
18.
20.
21.
22.
Safety warnings
What’s in the box?
Setting up your bedside sleeper
Adjusting the height
Bedside sleeper and bed
height set up
Bedside sleeper function: fix to bed
Using in standalone mode
Moving the bedside sleeper
Disassembly
Accessories
Keeping your POD in tip-top shape
Warranty information
Read all instructions before assembling and using the product
CONTENTS
POD PRODUCT MANUAL
2

SAFETY FIRST
POD PRODUCT MANUAL
3
TO PREVENT INJURY FROM CHOKING, CAREFULLY REMOVE AND
IMMEDIATELY MOVE OUT OF REACH ALL PROTECTIVE PACKAGING.
This product is intended for use for babies aged between 0 and
5 months, weighing up to a maximum of 9kg or until they can
push up on their hands and knees. Move your child to another
sleeping product when your child reaches this stage.
• BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING
MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN.
• Failure to follow these warnings and the instructions could result in serious
injury or death.
• This product is intended for use for babies aged between 0 and 5 months,
weighing up to a maximum of 9kg.
• The co-sleeper is not suitable for children who can sit or kneel or pull
themselves up. Stop using the product as soon as the child can sit or kneel
or pull itself up.

4
SAFETY FIRST
POD PRODUCT MANUAL
4
• Do not use this product without reading the instructions for use first.
• Do not use the product if any part is broken, torn, or missing. Contact
Babybee for replacement parts and instructions if needed. DO NOT
substitute parts.
• Be aware of the risk of burning cigarettes, open fires and other sources
of strong heat, such as electric bar fires, gas fires etc. in the vicinity of the
crib.
• To help prevent falls, do not use this product when the infant begins to
push up on hands and knees or has reached 9kg, whichever comes first.
• Make sure the users of this product are knowledgeable on its proper
operation.
• The product is ready for use only when all locking mechanisms are
engaged. Check carefully that these are engaged before use.
• When the child is left unattended in the product, in “standalone sleeper
mode”, always make sure that the side rail is raised and the zips are
completely closed.
• All opening, adjusting, anchoring and positioning operations of the
product must be carried out exclusively by an adult.

5
PRODUCT MANUAL
• Before use in “co-sleeping mode” (fixed to bed) make sure the product
is properly anchored and positioned.
• When the product is used in “co-sleeping mode” (fixed to bed), before
laying the child in it, make sure that the fastening belt is hooked and
tensioned properly, the product must be secured to the adult bed and
no gaps between the lower side of the co-sleeper and the adult bed/
mattress must be present. If there is any gap between the co-sleeper
and the adult bed DO NOT use the product.
• The product must always be placed on a horizontal surface. Never
leave the product on an inclined surface with the child inside of it.
• Young children should not be allowed to play unsupervised in the vacinity
of the crib.
• Placing additional items in the product may cause suocation.
• Do not use the product without the frame.
• Keep the fastening belt away from the reach of children.
• Only use the mattress supplied by the manufacturer.
• The thickness of the uncompressed mattress shall not exceed 25mm. The
upper surface of the non compressed mattress must be at least 120mm
lower than the upper surface of the lowest side of the bedside sleeper.
• Do not use more than one mattress in the product.
• Do not leave any object inside the product that could reduce its depth.
• Do not position the product near walls and obstacles to prevent
entrapment hazards.
SAFETY FIRST
POD PRODUCT MANUAL

6
SAFETY FIRST
POD PRODUCT MANUAL
• To reduce the risk of SIDS, paediatricians recommend healthy infants be
placed on their backs to sleep, unless otherwise advised by your physician.
• If a sheet is used with the pad, use only the one provided by Babybee
or one specifically designed to fit the dimensions of the bassinet mattress.
• Do not leave small objects inside the product that could cause choking
hazards.
• Use only spare parts approved by the manufacturer. Do not apply
accessories to the product, which are not supplied by the manufacturer.
• The attachment system is provided, do not use any other system to attach
co-sleeper to the bed.
• Do not adjust the product with the child inside.
• Do not move the product with the child inside.
• Do not use the product for more than one child at a time.
• The product must be kept away from electric cables and cords: do not
place the product near windows where cords, curtains or similar objects
could pose choking or strangling hazards for the child. To avoid strangling
hazards, do not give to your child or place near her/him, objects equipped
with cords.
• Do not place the product close to another product, which could present
a danger of suocation or strangulation, e.g. strings, blinds/curtain cords,
etc.
• Strings can cause strangulation! Do not place items with a string around a
child’s neck, such as hood strings or pacifier cords. Do not suspend strings
over a bassinet or cradle or attach strings to toys.
SAFETY FIRST

7
• All assembly fittings should be tightened properly, and care should be
taken to ensure no screws are loose, as a child could trap parts of the
body or clothing e.g., strings, necklaces, ribbons etc. which could pose
a risk of strangulation.
• To avoid hazards from the child’s neck being caught on the top rail
on the side that is next to the adult bed, the top rail must not be
higher than the adult’s bed mattress.
• To avoid the risk of your child being strangled, the attachment system
to the adult’s bed shall always be kept away from and out of the crib.
• A prolonged exposure to the sun may cause changes of tones to the
product’s colour. After a prolonged exposure of the product to high
temperatures, wait a few minutes prior to placing your child in it.
• When not in use, keep the product away from the reach of children.
• Before assembly, check that the product and all its components
have not been damaged during transportation. Should any part
be damaged do not use and keep out of reach of children.
• Always check that the bassinet is securely locked in the stand by pulling
upwards on the bassinet bed.
BEFORE CO-SLEEPING MODE (FIXED TO BED)
• Always read and follow the assembly instructions for each product
use mode (co-sleeper & stand alone bassinet).
SAFETY FIRST
POD PRODUCT MANUAL

8
BABYBEE ROVER3
• Always use ALL required parts for each use mode. Check instruction
manual for a list of required parts. Periodically check product for loose,
damaged, or missing parts.
• The side support of the co-sleeper should always be put close to the
adult mattress and the mattress should always be aligned with the
height of the side support for restraint of the co-sleeper. Furthermore,
the co-sleeper should be firmly fixed to the structure of the adult bed
or to the mattress support.
• Use only the pad provided by manufacturer. NEVER add a pillow,
comforter, or another mattress for padding.
• Assemble product according to manufacturer’s instructions for ANY
use mode - bedside sleeper as well as bassinet.
• The maximum thickness of the mattress is to be 25mm.
Infants have suocated:
• In gaps between extra padding and side of
bassinet/cradle, and
• On soft bedding
• The bassinet should be locked in the fixed position when the child is left
unattended.
• Always ensure that the product is used on a horizontal surface.
SAFETY FIRST
POD PRODUCT MANUAL

99
Please check that you have all the correct parts
before getting started.
1.
2.
3.
4.
1 x bedside sleeper
2 x legs
1 x carry bag
1 x basket
5.
6.
7.
8.
2 x fixing belts
1 x fitted sheet
1 x mosquito net
1 x mattress and
waterproof cover
.
.
. . .
. . .
WHAT’S IN THE BOX?
POD PRODUCT MANUAL

1010
POD PRODUCT MANUAL
SETTING UP YOUR
BEDSIDE SLEEPER
Open bag and take out
contents. Remove all protective
packaging, except for the
plastic cover of the mattress.
The return policy is void if the
mattress bag is opened or
destroyed.
1
Insert one set of legs into the
bedside sleeper body at a
time, ensuring the button clicks
audibly into the leg joint. Ensure
both legs are clicked in securely.
2
Adjust height to the lowest
position by aligning the spring
button with the required hole
on the inside of the leg - insert
and push down. Repeat on the
other side.
3
Insert all basket tubes (attached
to basket) into frame, until spring
buttons audibly click into place.
4
click!
click!

ADJUSTING THE HEIGHT
Squeeze the height adjustment buttons at each end of
the bedside sleeper body and raise the bedside sleeper
to one of the seven height settings.
1
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
• THE  LEGS OF THE CO-SLEEPER SHOULD ALWAYS BE
ADJUSTED TO THE SAME HEIGHT TO ENSURE A FLAT
EVEN SURFACE.
• NEVER USE CO-SLEEPER ON AN INCLINED POSITION.
• THIS PRODUCT IS INTENDED FOR USE FOR BABIES AGED
BETWEEN  AND  MONTHS, WEIGHING UP TO A
MAXIMUM OF KG.
POD PRODUCT MANUAL
11

12
BABYBEE ROVER3POD PRODUCT MANUAL
12
BEDSIDE SLEEPER AND
BED HEIGHT SET UP
Measure the bed height.
1
Pull height adjustment
handles at each end
up to adjust bedside
sleeper to preferred
height.
2
Ensure the bedside sleeper side wall closest to the bed is
not higher than the adult mattress.
3
Check bedside sleeper is level, both numbers on the height
adjustment handles are the same & the crib is not on a lean.
4
• THE  LEGS OF THE CO-SLEEPER SHOULD ALWAYS BE
ADJUSTED TO THE SAME HEIGHT TO ENSURE A FLAT EVEN
SURFACE.
• NEVER USE CO-SLEEPER ON AN INCLINED POSITION
• THIS PRODUCT IS INTENDED FOR USE FOR BABIES AGED
BETWEEN  AND  MONTHS, WEIGHING UP TO A
MAXIMUM OF KG.

BEDSIDE SLEEPER AND
BED HEIGHT SET UP
Recommended mattress heights:
Compatible with Single, King Single, Double, Queen
and King Size Beds - not compatible with Super King Bed.
This bedside sleeper is designed for use only with adult beds
that are between 50.8cm and 63.5cm from floor to top of adult
mattress.
If your mattress is below 50.8cm do not use product as a bedside
sleeper. Adult mattress must be at least 2.5cm higher than the
co-sleeper’s side opening.
BEDSIDE SLEEPER FUNCTION
- FIX TO BED
1
To lower the drop side: Fully open
zips on both sides. Holding the side
rail, slide the buttons on the under
side of the rail and lift rail upwards.
The drop side can be attached
by Velcro® to the underside of the
bedside sleeper.
2
Attach the part of the fixing belt
with two clips to the underside of
the bedside sleeper, with the female
part pointing towards the floor.
Repeat with the 2nd fixing belt.
1313
1
1
1
1
POD PRODUCT MANUAL

1414
BABYBEE ROVER3
FIX TO BED CONT.
POD PRODUCT MANUAL
Place bedside sleeper alongside the parent’s bed and
with the drop side lowered, adjust the bedside sleeper
height until the top edge of the bedside sleeper’s lowest
side is level with or below the parent’s mattress.
3
• TO AVOID INJURY OR DEATH, THE TOP EDGE OF
THE CO-SLEEPER’S LOWEST SIDE NEXT TO THE ADULT
MATTRESS MUST BE NO HIGHER THAN THE ADULT
MATTRESS
• WHEN THE CO-SLEEPER IS ATTACHED TO THE ADULT
BED, ENSURE THE FIXING BELTS REMAIN STRAIGHT AND
FIXED IN A HORIZONTAL POSITION.

15
FIX TO BED CONT.
4Wrap the fixing belt around the
whole frame of the adult’s bed.
5
Click fixing belt into bedside
sleeper. Tighten the fixing belt
ensuring there is no gap between
the adult bed and the co-sleeper.
CHECK THE TIGHTNESS OF THE
ATTACHMENT SYSTEM BEFORE
EACH USE BY PULLING THE
BEDSIDE SLEEPER IN A DIRECTION
AWAY FROM THE ADULT BED.
click!
ENTRAPMENT HAZARD
TO PREVENT DEATH FROM ENTRAPMENT, THE CO-SLEEPER
MUST BE PROPERLY SECURED TO THE ADULT BED USING THE
FIXING BELTS.
POD PRODUCT MANUAL

BABYBEE ROVER3
FIX TO BED CONT.
POD PRODUCT MANUAL
16
BOTH CLIPS ON THE ATTACHMENT STRAP
MUST BE ATTACHED TO THE CRIB WHEN IN CO-SLEEPER MODE.
IF ONE CLIP IS BROKEN OR WILL NOT ATTACH TO THE CRIB,
DO NOT USE THE CRIB IN CO-SLEEPER MODE UNTIL YOU HAVE
REPLACED THE FIXING BELT.
NEVER USE THIS PRODUCT IN BEDSIDE
SLEEPER MODE WITHOUT THE FIXING BELTS SECURELY ATTACHED
TO THE ADULT BED.
STOP USING THE CRIB AS SOON AS THE
CHILD IS ABLE TO SIT UNAIDED, PULL ITSELF UP OR PUSH UP ON
ITS HANDS AND KNEES.
THERE SHALL NEVER BE A GAP BETWEEN
THE CO-SLEEPER AND THE ADULT BED. IF THERE IS ANY GAP
BETWEEN THE BEDSIDE SLEEPER AND THE ADULT BED DO NOT
USE PRODUCT. DO NOT FILL THE GAP WITH PILLOWS, BLANKETS
OR OTHER ITEMS THAT ARE A SUFFOCATION HAZARD.
DO NOT USE
THIS PRODUCT WITHOUT READING THE
INSTRUCTIONS FIRST. INSTRUCTIONS CAN
BE FOUND AT BABYBEEONLINE.COM

17
POD PRODUCT MANUAL
Raise the drop side: Lift the
side rail and slide it into place
ensuring it ‘clicks’ into position.
Zip up the sides.
1
Check bassinet is level,
both numbers on the height
adjustment handles are
the same & the crib is not
on a lean.
1
ALWAYS RAISE THE DROP SIDE WHEN
NOT FASTENED TO AN ADULT BED.
1
1
1
1
click!
NEVER MOVE THE CO-SLEEPER
WHILST THE BABY IS IN IT.
Lift one side of the bedside
sleeper approx. 15° and move
as desired. There are small
wheels under each leg.
1
15o
15o
USING IN STANDALONE MODE
MOVING THE BEDSIDE SLEEPER

18
POD PRODUCT MANUAL
18
DISASSEMBLY
Disconnect fixing belts
1
Remove basket tubes by
pressing silver spring button
on the lower leg and lifting.
2
Put the bedside sleeper in the
lowest position, lift side of the
frame to remove spring button
from frame, repeat on the
other side.
3
Press button on the inside of the
upper legs, and pull upwards
to remove legs from co-sleeper
frame.
4
Put basket inside bedside
sleeper.
5

1919
DISASSEMBLY
POD PRODUCT MANUAL
Place legs, flat side down,
one on top of the other facing
opposite directions with the
legs flush against bedside
sleeper drop side.
Add in other accessories,
fixing belts and mosquito net.
6
Place in carry bag with drop
side to the bottom of the bag.
Now you are ready to take your
bedside sleeper anywhere!
7

BABYBEE ROVER3
ACCESSORIES
POD PRODUCT MANUAL
20
Carry bag Fitted sheet Waterproof
mattress cover
Attach the mosquito net when
in standalone sleeper mode.
Pull elasticated ends of the
mosquito net over the foot ends
of the sleeper and secure the
press studs underneath the metal
frame on each long side
Mosquito Net