AFG LH8028 User manual

LH8028
3 In 1 Mini Crib
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
If you have any questions or missing parts, please contact us. DO NOT return product
parts to the store where it was purchased before contacting AFG Customer Service.
AFG Customer Service:
E-mail: [email protected]
Tel: [phone]
Model No.: LH8028
PO #:
Serial #:

2022AFG Baby Furniture LH8028 Assembly Sheet © 1
Product Assistance Procedures
AFG International Products strives to ensure that our customers are receiving a quality piece of
furniture. We want our customers to be satisfied with using our products for years to come. In
the event that you need assistance or have any inquiries regarding our products, please feel
free to contact us with the information below.
Customer Service Email: [e-mail]
Customer Service Phone Number: 1.323.722.6268
To request replacement parts, please send an email to our customer service with the
following information and we will do our best to assist you.
1. Proof of Purchase*
2. Item Number of the Product or Identification Sticker**
3. Part Letter or Number of the Replacement Part
4. Quantity
5. Your Shipping Address
6. Description of Your Problem
Please also provide pictures of the issue whenever possible. This will help us understand and
assist you with your problem.
*Acceptable Proof of Purchase includes, but not limited to, your Online Purchase Confirmation
Email, a screenshot of the purchase history of the online retailer, or a receipt from your local store.
Our warranty extends only to the original purchaser and is non transferable. Warranty is
valid only when the proof of purchase can be provided.
Please retain a copy of your purchase records for future inquires.
**All of our baby products come with an identification sticker. This is a white sticker that contains all the
product information of the item.
For cribs, the identification sticker is generally located near the bottom of the crib’s side rails, the toddler
guardrail, or the stabilizer bar.
For changers, the identification sticker is located on the top panel of the changing unit.
Under no circumstances should you remove any warning labels from the product. These
labels are meant to be permanent and removing them may damage the wood and void
your warranty.

2022AFG Baby Furniture LH8028 Assembly Sheet © 2
WARNING:
READ ALL WARNING & SAFETY INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP
INSTRUCTIONS WITH CRIB FOR FUTURE USE.
First remove hardware from box and sort by size. Check to see that all hardware and wooden pieces
are present before assembling.
Follow instructions listed below in the proper sequence as numbered to assure fast, easy and correct
assembly.
DO NOT use this crib if the enclosed or attached instructions cannot be strictly adhered to.
WARNING:
DO NOT attempt to repair or modify parts with cracks or defects. Please contact us for
immediate replacement.
This product is for home use and is not intended for use in schools, day care centers or other
commercial establishments.
Must be assembled by a capable adult.
CHOKING HAZARDS: DO NOT put small / loose components on top of the changing table unit
where baby could reach. Crib Warnings
WARNING
Failure to follow these warnings and the assembly instructions could result in serious injury or death.
DO NOT use a water mattress with this crib.
Strings can cause strangulation! Never place items with a string around a child’s neck such as
hood strings or pacifier cords. Never suspend strings over product or attach strings to toys.
Discontinue use of the product when child is able to climb out or reaches the height of 35 in.
(890mm). The child should be placed in a youth or regular bed.
Never place product near a window where cords from blinds or drapes can strangle a child..
Always provide the supervision necessary for the continued safety of your child. When used for
playing, never leave child unattended.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to
sleep, unless otherwise advised by your physician.
Never use the product if there are any loose or missing fasteners, loose joints, broken parts, or
torn mesh or fabric. Check before assembly and periodically during use. Contact AFG for
replacement parts. Never substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Keep wall decorations, especially those with strings, completely out of a child’s reach.
Check fasteners periodically. Do not over tighten. This may cause distortion or breakage.
Never use plastic shipping bags or other plastic films as mattress covers. They are not sold and
intended for that purpose and can cause suffocation.
Use the crib as a crib, not as a play yard. Remember that a crib is not a substitute for a parent’s
supervision.
Parents should ensure a safe environment for their child by checking the crib regularly before
placing the child in the product. Please make sure that every component is properly and securely
in place.
Remove clear protective wrapping before using crib.
When folding, unfolding or adjusting the crib, keep child away from moving parts.

2022AFG Baby Furniture LH8028 Assembly Sheet © 3
Mattress is removable and washable. Clean other parts with household soap or mild detergent.
Periodically check for loose screws, worn parts, torn material or loose stitching. Tighten or
replace parts as needed.
All four mattress support brackets must be at the same height position.
The product, including side rails, must be fully erected prior to use.
Child can become entrapped and die when improvised netting or covers are placed on top of
product. Never add such items to confine child in product.
WARNING!
Infants can suffocate on soft bedding
NEVER add a pillow, comforter.
NEVER place additional padding under an infant.
NEVER LEAVE INFANT IN PRODUCT WITH SIDES DOWN. Infant may roll into space between
pad and loose mesh side causing suffocation.
Infant can suffocate in gaps between a mattress too small or too thick and product sides.
Always attach securely. If is not secured, child in crib can lift or shift and get neck trapped
between frame.
Never leave in place when child is in crib.
CAUTION!
USE ONLY MATTRESS /PAD PROVIDED BY MANUFACTURER ( WHICH MUST BE AT LEAST 37
INCHES LONG BY 23 INCHES WIDE AND NOT MORE THAN 5 INCHES THICK).
Strangulation Hazard
Strings can cause strangulation! Do not place items with a string around a child’s neck, such as
hood strings or pacifier cord. Do not suspend strings over a crib or attach strings to toys.
To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing
on loose fasteners.
DO NOT place crib near windows where cords from blinds or drapes may strangle a child.
Keep wall decorations, especially those with strings, completely out of a child’s reach.
Fall Hazard
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
Stop using crib when child begins to climb out or reaches the height of 35 in. (89cm).
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing
parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose
bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact
(AFG International Products Inc.) for replacement parts and instructional literature if needed. DO
NOT substitute parts.
Storage: The crib must be kept in a dry and clean area. Solid wood tends to exchange moisture with
the surrounding air and reacts to major changes in temperature and humidity. It is best to place your
furniture away from heating or air-conditioning vents. Direct exposure to sunlight can discolor the
wood, so do not place your product where it will receive prolonged sunlight exposure.
Care and Cleaning: Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly. If you choose to refinish this furniture, be
sure to use only a non-toxic finish specified for children’s products.

2022AFG Baby Furniture LH8028 Assembly Sheet © 4
LH8028 Mini Crib Parts Identification Sheet
DO NOT assemble crib if parts and hardware are defective or missing.
Contact AFG for exchange or keep the original box for return authorization.
~ Crib Assembly Parts
A. Front Left Leg
(1 pc) B. Front Right Leg (1 pc) C. Rear Left Leg (1 pc) D. Rear Right Leg (1 pc)
E. Left Side Panel
(1 pc) F. Right Side Panel (1 pc) G. Stationary Side (1 pc) H. Headboard (1 pc)
J. Mattress Support
(1 pc)

2022AFG Baby Furniture LH8028 Assembly Sheet © 5
LH8028 Mini Crib Hardware Identification Sheet
DO NOT assemble crib if parts and hardware are defective or missing.
Contact AFG for exchange or keep the original box for return authorization.
~ Crib Assembly Hardware

2022AFG Baby Furniture LH8028 Assembly Sheet © 6
LH8028 Mini Crib Assembly Sheet
STEP 1:
Attach Front Left Leg (A) and Rear Left Leg (C) to Left Side Panel (E) by using 4
Bolts (#1) to thread into 4 barrel nuts (#2), tighten firmly with Wrench (#7).

2022AFG Baby Furniture LH8028 Assembly Sheet © 7
LH8028 Mini Crib Assembly Sheet
STEP 2:
Attach Front Right Leg (B) and Rear Right Leg (A) to Left Side Panel (F) by using
4 Bolts (#1) to thread into 4 barrel nuts (#2), tighten firmly with Wrench (#7).

2022AFG Baby Furniture LH8028 Assembly Sheet © 8
LH8028 Mini Crib Assembly Sheet
STEP 3:
a. Insert 2 Dowels (#3) on each end of top rail Headboard (H).
b. Attach Headboard (H) to top rail Head board (H), and insert 2 bolts (#4) to each end of top rail
Headboard (H), tighten firmly with Wrench (#7).
c. Insert 2 Barrel Nuts (#4) to bottom rail of Headboard (H), and insert 2 bolts (#4) to each end of
bottom rail of Head board (H), tighten firmly with Wrench (#7).

2022AFG Baby Furniture LH8028 Assembly Sheet © 9
LH8028 Mini Crib Assembly Sheet
STEP 4:
Use 4 bolts (#6) to attach brackets on the mattress support (J) to the legs at an even level on
all sides, tighten firmly by using with Wrench (#7).

2022AFG Baby Furniture LH8028 Assembly Sheet © 10
LH8028 Mini Crib Assembly Sheet
STEP 5:
a. Insert 2 Dowels (#3) on each end of top rail of stationary side (G).
b. Attach Front leg to top rail of stationary side (G), and insert 2 bolts (#4) to each end of top rail of
stationary side (G). tighten firmly with Wrench (#7).
c. Insert 2 Barrel Nuts (#4) to bottom rail of stationary side (G), and insert 2 bolts (#4) to each end of bottom
rail of stationary side (G), tighten firmly with Wrench (#7).
STEP 6: Completed
Place the Mattress Pad (#5) on top of the mattress support.

2022AFG Baby Furniture LH8028 Assembly Sheet © 11
LH8028 Daybed Assembly Sheet
Daybed Completed

2022AFG Baby Furniture LH8028 Assembly Sheet © 12
LH8028 TWIN SIZE Bed Assembly Sheet
(Metal not included) *Metal frames can be purchased at any furniture store.
TWIN SIZE BED ASSEMBLY
a. Attach the Rear Left Leg (C) and Rear Right Leg
(D) to Headboard (H) . use this as the headboard
for the full size bed.
b. Attach Front Left Leg (A) and Front Right Leg
(B) to Footboard (G) ,this will be the footboard.
c. Using the bottom holes of the headboard and
footboard, assemble the headboard and footboard
together with mattress support metal-frame rails.
*Metal frames can be purchased at any furniture
store.

2022AFG Baby Furniture LH8028 Assembly Sheet © 13
Safety Tips for Assembling and Re-assembling Cribs
Parents should not use any crib with missing, broken or loose hardware parts. Crib slats or spindles should be
spaced no more than 2-3/8” apart, and none should be loose or missing. NEVER use a crib with corner posts over
1/16” of an inch above the end panels (unless they are over 16” high for a canopy).
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use
crib if any parts are missing, damaged or broken. Contact (AFG International Products Inc.) for replacement parts
and instructional literature if needed. DO NOT substitute parts.
Never place infants to sleep on pillows, sofa cushions, adult beds, waterbeds, beanbags, or any other surface not
specifically designed for infant sleep.
Always check all sides and corners of the crib to assure proper assembly with no openings that may entrap a child.
The crib mattress should fit snugly with no more than two fingers width, one-inch, between the edge of the mattress
and the crib side. Otherwise, the baby can get trapped between the mattress and the side of the crib.
Do not try to repair any side of the crib without manufacturer-approved hardware.
Putting a broken side up against the wall is not a solution and can often make the situation worse.
When re-assembling the crib for your second child, please keep in mind that the screw holes will need to be filled in
order for the screws to grip to the wood. Talk to your local hardware store or lumberyard about how to do it properly.
One year limited warranty
AFG International Products Inc. © wants you to be satisfied with any product that bears the AFG name or logo. We will
provide promptly, at the request of the retailer, and without charge, any missing parts that have been reported, with proper
description, within 7 days of the purchase of the products. Our warranty guarantees optimal workmanship and lack of
significant defects. The product warranty lasts a year from the date of your purchase. Please keep the original receipt so
that we may process your one year limited warranty request. This warranty only covers new units with original packaging.
Ownership of the warranty is non-transferable. The warranty does not cover any used, second-hand, or demo models. Our
obligation under this warranty is to replace or repair the merchandise, at our option, free of charge. This warranty does not
cover any damaged or defective parts that result from normal wear and tear, abuse, negligence, improper use or alteration
to the finish design, and hardware. Specific rights issued by this warranty may vary from state to state. Some states do not
allow limitations on how long implied warranties last. DO NOT return products to the store once a product is used, it cannot
be resold and the materials and energy invested in the product would go to waste. In the event that AFG determines that a
defect that may result from customer abuse or misuse, we will contact you with information about services and methods to
prevent occurrences. We strongly recommend you register your product with our company by filling out registration and
mailing it back to us. This ensures you are up-to-date with our products’ maintenance and information.
This warranty does not cover damage caused by accident, misuse or any use other than as intended and described in this
assembly sheet or damage resulting from failure to maintain and clean this product as specified in this assembly sheet.
This warranty applies only to the original purchaser of the AFG International Products Inc. product.
CAUTION! Safety Tips for Use of Cribs
Many older cribs, including secondhand or second use cribs, may not meet all current safety
standards. For baby’s safety, even if you are on a tight budget, you should not purchase a used
crib at a garage sale or accept a hand-me-down that does not meet the most recent Federal and
ASTM standards.
Thank you for choosing AFG.
MADE IN VIETNAM AFG ©