Babybee noa User manual

noa convertible high chair
babybeeonline.com
IMPORTANT! READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE
Complies with AS 4684:2009 and EN14988:2017

2
Congrats, you’ve just
joined the NOA club!

The very important stuff
Before we start, there’s a few important things you
need to be aware of:
Buon appetito! From all of us at
Return Policy
If you decide that the NOA Convertible
High Chair is not the perfect t for
your family, we offer a Free Return
Policy when returned in original
condition and packaging (with no
signs of usage). Please be mindful
of this when unboxing and setting
up. Refer to our website for full terms
and conditions.
Support
If at any stage you require assistance
with set up or use, please refer to the
NOA product page on our website.
There, you'll nd instructional videos
and FAQs. Or feel free to email us
anytime at:
[email protected]
or [email protected]
Safety rst
The safety of your family is our number one priority. Please take
the time to carefully read this manual and all warning notices
on page 4-5 before getting started. Incorrect assembly or use
can result in serious injury or even death.
This high chair is intended for use for children who are able
to sit up unaided and up to an age of 3 years or a maximum
weight of 15 kg. The high chair can be converted and used as
a toddler seat which is suitable from 3 to 5 years of age.
3

4
Safety Warnings
This Babybee NOA convertible high
chair is tested to comply with AS
4684:2009 and EN14988:2017 safety
requirements.
Please read and follow the below
warning notices before using your
high chair:
FOLLOW THE MANUFACTURER’S
INSTRUCTIONS.
DO NOT LEAVE CHILDREN
UNATTENDED.
THE HARNESS MUST ALWAYS BE USED
AND CORRECTLY FITTED - MOST
INJURIES FROM HIGH CHAIRS ARE
CAUSED BY FALLS.
POSITION THE HIGH CHAIR AWAY
FROM SOLID STRUCTURES AND
BENCHES TO AVOID INJURIES
CAUSED BY FALLS AND BY ACCESS
TO DANGEROUS ITEMS.
• This high chair requires adult
assembly.
• Do not to use this product until
your child can sit up unaided.
• This high chair is intended for use
for children who are able to sit
up unaided and up to an age of
3 years or a maximum weight of
15kg.
• This product should only be used
in an upright position once your
child is capable of reliably and
consistenly sitting upright.
• Always use the restraint system of
this high chair.
• Use this high chair on a at, even
and horizontal oor and do not
elevate the high chair on any
structure or table.
• To reduce the risk of injury,
position high chair away from
furniture, walls, hot surfaces and
liquids, window covering cords,
and electrical cords.
• Position the high chair away
from furniture when the chair is
not being used at a table with a
tray removed.
• Do not use the high chair unless
all components are correctly
tted and adjusted.
• Do not use the high chair if any
part is broken, torn or missing.
• Do not use the high chair if it
is not working correctly. Seek
repair advice from Babybee
only.
• Falling hazard: Prevent your child
from climbing on the product.
• Do not lift or carry the high chair
when a child is in it.
• Take care when adjusting
the tray to avoid nger or skin
entrapment.
• Be aware of the risk of open res
and other sources of strong heat
in the vicinity of the high chair.
4

5
• Be aware of the risk of tilting
when your child can push their
feet against a table or any other
structure.
• When high chair is not in use,
store away from children.
• Ensure you follow the
maintenance and cleaning
instructions as included in this
instruction manual and care
labels on the product.
• Ensure you are regularly
inspecting all screws and ttings
to make sure they are secured
tightly.
• Any additional harness other
than the one provided by the
manufacturer, shall comply with
EN 13210.
• The toddler chair is designed to
be used by children aged 3 - 5
years.

6
4.
7.
8.
10.
11.
12.
13.
13.
14.
18.
20.
22.
23.
Safety Warnings
Features & components
What’s in the box?
Assembling the cross-brace
Installing the legs
Installing the footrest
Attaching the seat
Installing the crossbar support
Handy harness tips
Assembling & installing the tray
Converting to toddler chair
Maintenance tips
Warranty
Contents

7
Features & Components
1.
2.
3.
4.
Seat
Seat Liner
Legs
Base Tray
5.
6.
7.
8.
Top Easy-Clean Tray
Footrest
Support Crossbar
Harness with Harness Covers
1
2
3
4
5
6
7
8

Please check that you have all the correct parts
before getting started.
What’s in the box?
1 x Seat (A)
1 x Seat Liner (B)
2 x Cross Brace Bars (C)
4 x Legs (D)
1 x Harness with Harness Covers (E)
1 x Footrest (F)
1 x Support Bar (G)
1 x Base Tray (H)
1 x 2nd easy-clean tray with cup holder (I)
4 x Bolt Nuts (J)
2 x Support Bar Screws (S1)
3 x Footrest & Crossbrace Screws (S2)
4 x Seat Screws (S3)
4 x Leg Screws (S4)
1 x Big Allen Key Tool (K)
1 x Small Allen Key Tool (L)
4 x Toddler Chair Legs (M)
4 x Foot Stopper (N)
Handy
Hint!
You will also need a at head screwdriver
to assist in your set up
8

I
A B C D
E F
G
H
S1 S2 S3 S4
K L M N
J
9

10
Let’s get this high chair
good to go!
1. Assemble the cross-brace for underneath the seat
Slot the cross-brace bars (C)
together using the notches in the
centre of each piece
1a
Secure pieces together in the
centre hole by using screw (S2)
and the small allen key (N)
ensuring you put the screw in
from underneath as below
1b
screw
here

11
2. Install the high chair legs
Before continuing, ip the cross
brace back the right way so that
the screw is facing the ground.
2a
Before proceeding with attaching
the legs, ensure the bolt nuts (K) are
in the correct starting position as
below.
The hole in the side of the bolt nut (K) needs to be facing towards the screw
hole so the screw can go through it.
2b
Handy
Hint!
The legs with the holes in the side are the
front legs - this is where the footrest will
attach. These must be next to each other.
Screw hole Bolt nut hole
Leg
screw
Bolt nut

12
Align the top of each leg (D) with
one end of the wooden cross
brace (C) put together in Step 1.
2c
Line up the footrest (F) with the
smaller holes in the sides of the
front legs.
Attach using screws (S2) through
the holes in the back of the front
legs and the small allen key (N).
Once the footrest is secure, you
can fully tighten the screws in the
front legs.
3a
3b
3c
Using a at head screwdriver,
insert the bolt nut (K) into the
bolt nut hole in the side of the
leg. Insert the connecting leg
screws (S4) into the screw hole
and tighten using the small allen
key (N).
Only loosely tighten the bolts in
the front legs.
Screw the four black feet
stoppers (L) into the bottom of
each leg.
2d
3. Installing the footrest
2. High chair legs cont.

4. Attaching the seat
Fix the seat (A) to the base
by aligning the holes in the
underside of the seat with the
holes in the top of the cross
brace.
4a
Turn the seat and legs on their
side and secure them using the
seat screws (S3) and the big
allen key (M).
4b
IMPORTANT! The seat liner and harness will come semi-attached to the seat.
You will need to slip the back ap of the seat liner over the back of the seat
and check that all 5 ends of the harness are correctly tted through the seat
liner AND the plastic seat before continuing on with your set-up.
13
Handy
Hint!
Ensure the respective
holes on seat base and
cross brace are aligned.
5. Installing the crossbar support
Turn the high chair upside down.
5a
Align the holes in the back legs with
the holes in the plastic support bar (G)
and secure with the smallest screws
(S2) and the small allen key (N).
5b

14
2. Undoing the harness
Simply push down on the side
clips in the centre buckle as
shown below and pull out from
the centre buckle.
2a
Your NOA includes a pair of
harness covers to ensure the
harness sits comfortably on your
child.
2b
These come already attached
to the harness but can be easily
removed by sliding them off the
shoulder straps.
2c
push to
release
Handy Harness Tips
1. Securing the harness
Place your child in the NOA seat
and place their arms through the
shoulder straps.
1a
Pull up the crotch harness strap
and clip both waist strap clips
into the centre buckle on the
crotch strap.
1b
This will make a loud ‘click’
when secured.
1c
listen for
the click!

THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST
INJURIES FROM HIGH CHAIRS ARE CAUSED BY FALLS.
15
3. Adjusting the harness
The harness straps can be
adjusted to suit the size of your
child.
3a
Depending on your child’s
height, thread the shoulder strap
through the appropriate slot on
the seat and seat liner.
3b
Adjust the strap length using the
buckle on each strap as required
to shorten or lengthen.
3c

16
5. Inserting the harness
4. Removing the harness
To remove the harness, simply thread each strap back through the slot
in the seat and seat liner.
4a
Handy
Hint!
Slide the harness straps through at an angle to help them
slip through the slots in the plastic seat.
Place the seat liner (B) onto the seat (A) ensuring the ap of the
seat liner sits over the back of the seat.
5a
Thread the crotch harness strap through the slot in the base of the
seat liner and the corresponding slot in the bottom of the seat.
5b
Thread the waist harness straps through the vertical slots in the
side of the seat liner, then through the corresponding vertical slots
in the seat.
5c
Thread the shoulder harness straps through the slots in the
backrest of the seat liner, then through the corresponding slots in
the back of the seat. Shoulder harness position will be dependent
on the height of your child.
5d

17

18
Assembling & installing the tray
To install the tray on the high
chair, pull the release lever that
is located underneath the front
of the tray and slide it into the
grooves in the arms of the high
chair.
1
The NOA comes with a double
tray for easy cleaning.
3
To remove the top tray, simply lift
and pull the ap on either side of
the top tray whilst holding down
the bottom tray. It should unclip
and easily lift off the base tray.
4
The tray can be adjusted
to two-positions simply by
pulling the release lever and
sliding the tray to the desired
position, hearing it click into
place on the armrests.
2
To attach the top tray back onto
the base tray, simply align the holes
in either side of the top tray with
the plastic circles on the side of the
base tray and push down until you
hear a ‘click’.
5
listen for
the click!
listen for
the click!

19
TO AVOID FINGER ENTRAPMENT, KEEP YOUR CHILDREN’S FINGERS CLEAR
OF BOTH TRAYS WHEN ADJUSTING OR REMOVING
ENSURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING THE HIGH
CHAIR.
Handy
Hint!
Always use the top tray during meal times to maintain
the clean appearance for the lifetime of your NOA.
Refer to the detailed care instructions on page 22.

20
Converting to toddler chair
Once the seat is removed, you
will also need to unscrew the high
chair legs from the wooden cross
brace. Using the small allen key
(N), unscrew the screw in each
leg, making sure you also remove
the bolt nuts from each hole. You
may need to use a screw driver
to do this. Place them aside.
4
Remove the tray from the high
chair.
1
Unscrew the black feet stoppers
(L) from the bottom of each of
the high chair legs and screw
onto the bottom of each of the
shorter toddler chair legs.
2
Using the large allen key
(M), unscrew the screws from
underneath the seat connecting
to the cross brace unit. Place the
screws aside in a safe place.
3
Align the top of each toddler leg
(O) with one end of the wooden
cross brace.
5
Three claps for your little one! They’ve graduated
from high chair life and are ready to take a seat
in their toddler chair.