babymod Futura Cradle W0413 Installation and operating instructions

Unpack and separate all parts, different size bolts and screws. All holes for attachment have been pre-drilled or have metal
inserts. No drilling by the customer is necessary. Do not tighten bolts until all the components are properly in place. Ask your
store or call us for replacement of missing parts. Record your model number, serial number, date of purchase and the finish
color for future reference.
Do not substitute parts. All models have the same quantity of parts and hardware. Your model may look different from
the one illustrated due to stylistic variations. We continue to improve our products and may make minor changes to the
design. These changes may not be reflected in the instructions.
2
APedestals (2 pieces)
B Left vertical post
C Right vertical post
DWood cross beam
E Metal cross brace
1
GSide panels (2 pieces)
FHead/foot panels (2 pieces)
H Bottom board J Foam mattress
K 2” Phillips head bolts & washers (4 pieces each)
L1 3/8” Phillips head bolts & washers (8 pieces each)
M 1 1/8” Phillips head bolts & washers (4 pieces each)
N 1 1/4” Phillips head bolts (2 pieces)
P1/2” Phillips head bolts (2 pieces)
Q 5/8” Wood screws (2 pieces)
S Locking pin
U Plastic inserts
VCastersTPivot pins (2 pieces)
Hardware box
R Barrel nuts (4 pieces)

2 3
4 5
B
M
A
A
C
M
D
T
G
K
K
T
L
F
L
E
Q
H
G
N
N
3
R

Tighten all bolts and screws. Make sure that the casters
can rotate freely.
KEEP THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE.
7
8
6
P
V
U
S
J
4
Tap the plastic insert Uhalfway into the pre-drilled
hole with a rubber mallet. Use liquid detergent/soap to
minimize friction. Push in the caster. This will drive
the plastic insert into its final position.
V
U