babymod W6926 Installation and operating instructions

Congratulations on purchasing this product. This product will provide many years of service if you adhere to the following guidelines for
assembly, maintenance, and operation. This product is for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product. Do not use
power screwdrivers. All of our products are made from natural woods.
Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY
LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Olivia 2 Door Changer (W6926) Assembly and Operation Manual
revised 01-2008 Page 1

Page 2
PARTS
C-1. Left Side Panel C-2. Right Side Panel
D. Center Panel E-1. Small Shelf X 2 E-2. Big Shelf X 2 F. Top Panel
G. Bottom Panel I. Back Top Support Rail
J-1. Small Back
Panel
J-2. Big Back
Panel
K-1. Left Door K-2. Right Door
H-2. Cleat For
Top Panel
H-1. Cleat For
Bottom Panel
A. Leg X 4 B. Base Frame

HARDWARES
STEP 2.
Tools Needed
(not included)
Phillips
screwdriver
N-1. Big Wood
Dowel X 4
N-2. Small Wood
Dowel X 13 O. Cam Bolt X 14 P. Cam Lock X 14 Q. Metal Pegs X 16
R-1. Door Hinge X 4
T. 5/8” Washer
Head Screw X 2
S. Small
Screw X 18 U. 1-1/4” Wood Screw X 4
Page 3
STEP 1B.
B
A
N-1
M
C-1,C-2 OO
N-2
N-2
O
B
N-2
U
H-1
L. 1-1/8” Phillips
Round Head Bolt X 4
R-2. Door Hinge
Screw X 16
Insert big wood dowel (N-1) into each leg(A). Attach
four legs to the four corners of base frame (B) using
2-1/4” Phillips round head bolt (M). Tighten the bolts
securely.
STEP 1A.
Insert small wood dowels (N-2) into the cleat for bottom panel (H-1). Then attach
the cleat for bottom panel (H-1) to the base frame (B) as illustrated using 1-1/4”
wood screws (U).
Insert small wood dowels (N-2) into the left and right
side panel (C-1, C-2).
Screw cam bolts (O) into left and right side panel (C-1,
C-2) as illustrated.
M. 2-1/4” Phillips Round
Head Bolt X 4

C-1
G
D
N-2
O
P
P
N-2
B
G
Assemble left side panel (C-1) to the bottom panel (G).
Secure them using cam locks (P) as illustrated. Lock the
cam locks by turning them clockwise with a Phillips screw-
driver.
Insert two cam bolts (O) and one small wood dowel (N-2)
into the bottom panel (G) and then assemble the center
panel (D). Secure them using cam locks (P) as illustrated.
Lock the cam locks by turning them clockwise with a Phil-
lips screwdriver.
Lightly land the bottom panel assembly onto the
base frame (B) as illustrated. Make sure that the
small wood dowel (N-2) at the cleat for bottom panel
(H-2) fits its hole at the bottom panel (G).
STEP 4A.
Page 4
STEP 3A.
I
P
C-1
G
D
STEP 3B.
C-2
O
P
N-2
PO
I
G
STEP 3C.
Assemble the back top support rail (I) to the left side panel (C-1) and
center panel (D). Secure them using cam lock (P) as illustrated. Lock
the cam lock by turning them clockwise with a Phillips screwdriver.
Assemble right side panel (C-2) to the bottom panel (G) and back top
support rail (I). Secure them using cam locks (P) as illustrated. Lock the
cam locks by turning them clockwise with a Phillips screwdriver.
PN-2

Page 5
STEP 6.
STEP 7.
F
O
OU
N-2
H-2
H-2
F
N-2
PP
Secure the bottom panel assembly to the base frame (B)
using four 1-1/8” Phillips round head bolt (L).
STEP 4B.
Screw six cam bolts (O) into the top panel (F) as illus-
trated.
Insert two small wood dowels (N-2) into the cleat for
top panel (H-2). Attach the cleat for top panel (H-2) to
the top panel (F) as illustrated using two wood screws
(U).
Insert small wood dowels (N-2) to the left, center
and right side panel (C-1, D, C-2) as illustrated.
Lightly land the top panel (F) onto the top of side
panels assembly as illustrated. Secure them using
four cam locks (P). Lock the cam locks by turning
them clockwise with a Phillips screwdriver.
Attach the hinges (R-1) to left and right door (K-1, K-2)
using door hinge screws (R-2).
STEP 5.
R-1
K-1, K-2
R-2 R-2
R-2
L
B
A
A

KEEP THIS MANUAL IN A
SAFE PLACE FOR
FUTURE REFERENCE.
Page 6
IMPORTANT: As with all infant and baby furniture, it is important to check fasteners, screws,
and bolts periodically for tightness. Parents should ensure a safe environment for their children by
checking the furniture regularly before placing a child in the product.
This item has a manufacturer’s limited one year warranty. Visit our website at http://www.mybabymod.com/ for details.
Care and Cleaning:
Do not scratch or chip the finish. Do not use
abrasive chemicals for cleaning. Clean with mild
soap on a soft rag. rinse and dry thoroughly. If
you ever refinish this furniture, be sure to use
only a non-toxic finish specified for children’s
products. If you choose to refinish this furniture,
the warranty will be voided.
Insert the metal pegs (Q) inside
the changer. Place the small
shelves (E-1) and big shelves (E-
2) onto it.
Attach the left and right doors (K-1,
K-2) to the changer assembly us-
ing door hinge screws (R-2).
STEP 8.
Attach back panels (J-1, J-2) on the back of
changer using small screws (S) and two 5/8”
washer head screws (T) as illustrated.
Loose the four 1-1/8” Phillips round head
bolts (L) slightly if there is any difficulty
in inserting the back panels (J-1, J-2).
K-1 K-2
E-1
E-2
Q
R-2
STEP 9.
J-2
J-1 T
S

Congratulations on purchasing this product. This product will provide many years of service if you adhere to the following guidelines for
assembly, maintenance, and operation. This product is for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product. Do not use
power screwdrivers. All of our products are made from natural woods.
Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL MAY
LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Olivia 2 Door Changer Tray (W6926) Assembly and Operation Manual
Page 7

PARTS
HARDWARES
A. Front Rail
B. Back Rail
C. Left
Side Rail
I. Wood Dowel X 10 J. Cam Bolt X 6 K. Cam Lock X 6 M. Small Screw X 4
D.Center
Rail
E. Small Rail
F. Right
Side Rail
STEP 1.
Insert four wood dowels (I) into the ends of
small rail (E). Then attach the small rail (E)
to the left side rail (C) and center rail (D) as
illustrated.
STEP 2.
Insert cam bolts (J) and wood dowels (I) into the back rail (B),
left side rail (C), and right side rail (F) as illustrated.
L. Bracket X 2
Tools Needed
(not included)
Phillips
screwdriver
G. Cross Support
H. Bottom Panel
C
I
F
J
I
J
IJ
B
C
E
D
I
Page 8

G
B
F
I
I
I
C
D
K
Page 9
Insert three cam bolts (J) to the front rail (A).
STEP 4A.
Slide the bottom panel (H) into the
groove in side rails and back rail (B).
Attach the front rail (A) to the tray
assembly as illustrated. Secure them
using three cam locks (K). Lock the
cam locks by turning them clockwise
with a Phillips screwdriver.
Make sure that the end of cross sup-
port (G) fits the notch centered in the
front rail (A).
STEP 4B.
STEP 3.
Assemble the back rail (B) to the left side rail (C), center
rail (D) and right side rail (F). Secure them using three cam
locks (K). Lock the cam locks by turning them clockwise
with a Phillips screwdriver.
Place the cross support (G) into the notch centered in the
back rail (B).
Insert wood dowels (I) into the end of left side rail (C),
center rail (D) and right side rail (F) as illustrated.
A
H
Slide
KK
K
B
F
A
I
J
K

Fasten the tray to the changer with two brackets (L)
and four small screws (M). The tray must be fastened
securely to the changer.
M
L
babymod.
http://www.mybabymod.com/
STEP 5.