Backscatter FLIP 3.1 User manual

DOUBLE HANDLE
QUICK GUIDE
BS-GP-DTR3
LANYARD
HOLES
GOPRO MOUNT (INCLUDED)
1/4-20 THREADED TRIPOD MOUNT
1/4” SLOT FOR OTHER CAMERA TYPES
MOUNT YOUR GOPRO CAMERA
Use the thumb bolt originally included
with your GoPro camera to mount your
housing on the GoPro adapter.

INSTALLING LIGHT ARM BASES
The top of each handle includes a 1/4-20 threaded hole for light
arm bases. If you are installing a Backscatter Flex Arm, use a 3/16”
hex key and 7/16” wrench to mount the base to the handle. Tighten
well to prevent the arm from rotating.
BACKSCATTER • [phone] • [e-mail]
www.backscatter.com
DISTRIBUTED BY:
INSTALLING FLEX ARMS AND LIGHTS
1) Snap your light on to the flex arm.
2) Snap the flex arm on to the flex arm base.