Backyard Pro 554C3H860 LP User manual

1
LP GAS 60” COMMERCIAL
OUTDOOR GRILL
ASSEMBLY INSTRUCTIONS
03/2016
#554C3H860 LP - Base Grill
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU ARE
ASSEMBLING THIS UNIT FOR SOMEONE ELSE, GIVE THIS MANUAL TO HIM OR
HER TO SAVE FOR FUTURE REFERENCE.
ASSEMBLY OF THIS UNIT REQUIRES 2 ADULTS.
Intertek
Intertek

2
Parts List and Hardware

3
Exploded Parts View

4
Assembly Instrucons
STEP 1
Install casters (1) to the under shelf (2) and
using BOLT A--16PCS.
Set brakes on for safe assembly.
STEP 2
Insert the legs (3) into the sockets using
BOLT B—4 PCS, and ghten the legs.
STEP 3
Aach propane holder (4) to the under shelf
using BOLT A—4 PCS.

5
Assembly Instrucons
STEP 4
Set the grill secon (5) on to the legs and
under shelf.
STEP 5
Tighten the legs using BOLTB----4 PCS. So
the grill and legs are secure.
STEP 6
Aach handles (6) to each side, using BOLT
A– 4 PCS.

6
Assembly Instrucons
STEP 7
Aach top propane tank holder (7) to the
grill using BOLT A--- 4 PCS.
STEP 8
Place the burner covers (8) into their
posion.
STEP 9
Add grates (9) to the top of the grill.

7
Assembly Instrucons
STEP 10
Insert grease tray (10) in the back of the grill.
Then the grill is fully assembled
FULLY ASSEMBLED

8
Dome Lid Assembly Instrucons
Parts List and Hardware
DOME LID ASSEMBLY
Please note:
Lids are packaged individually for customer convenience and shipping convenience.
The assembly require 2 adults.

9
Assembly Instrucons
STEP 1
Install back panel (3) to le side panel (2)
and right side panel (1) using BOLT A –6 PCS
and NUT F—6 PCS.
STEP 2
Put the pre-assembled part to the grill like
shown in the picture.
STEP 3
Tighten the window screen to the grill body
using BOLT A— 6 PCS.

10
Assembly Instrucons
STEP 4
Install the lid handle (4) to the lid (5) using
BOLT A—2 PCS and G—2 PCS.
STEP 5
Put lid to the grill body and ghtened by
BOLT B-2 PCS and NUT C—2 PCS.
Please note, when install the lid, rst, use a
wrench to x the BOLT B from outside, then
Install the NUT C from inside, from this way,
you can assemble the lid easy.
STEP 6
Insert pin E—2 PCS inside of the grill to
BOLT- B. Like shown in the picture.

11
Assembly Instrucons
STEP 7
Aach the BOLT D from inside panel to
outside.
BOTL will help to limit the posion of lid
when opened.
To ensure the lid can’t be p o, and keep
the two lids in the same level.
STEP 8
Install Thermometer (6) to both lids.
FULLY ASSEMBLED