Backyard Pro 554SMOKR60KD User manual

+ Save these instructions for future
reference. If you are assembling this unit
for someone else, give this manual to
him or her to save for future reference.
+ Assembly of this unit requires 2 adults.
60"
CHARCOAL / WOOD
SMOKER GRILL
Assembly Instructions
Item No. 554SMOKR60KD
01.2022

2 |Warning
CALIFORNIA PROPOSITION 65
1. Combustible by-products, such as carbon monoxide, produced when using this product
contain chemcials known in the State of California to cause cancer, birth defects, or other reproductive harm.
2. This product contains chemicals, including lead and lead compounds, known to the State
of California to cause cancer, birth defects, or other reproductive harm.
Wash your hands after handling this product.
WARNING

Parts List and Hardware | 3
shopbackyardpro.com

4 |Assembly Instructions
shopbackyardpro.com
STEP 1
Install casters (1) to the leg (2) by turning the nut
on the top of the caster (1) inserting into leg (2)
and then tightening leg to stem.
STEP 2
Fully remove set screw in connecting piece (3) and
insert into leg. Once inserted, use set screw to
tighten position.
STEP 3
Install four support bars (4, 5) to legs having
connecting piece (3) resting directly on the top of
the caster and tighten using included hardware.
1
2

Operating Instructions | P. 03
shopbackyardpro.com
Assembly Instructions | 5
STEP 4
Install the bottom panel (6) to the legs
using included hardware.
STEP 5
Assemble the four support parts (7) with raised
side facing inwards on the bottom panel using
BOLT A -- 8 pcs.
STEP 6
Attach front panel (8) using BOLT A -- 5 pcs.

6 |Assembly Instructions
shopbackyardpro.com
STEP 7
Attach back panel (9) using BOLT A -- 5 pcs.
STEP 8
Attach left side panel (10) to the grill body using
BOLT A -- 8pcs. Make sure tray hooks are pointed
towards the back panel.
STEP 9
Attach right side panel (10) to the grill body using
BOLT A -- 8pcs. Make sure tray hooks are pointed
towards the back panel.
TIP: When screwing in bolts use an alternating
pattern to ensure a tight fit.

Operating Instructions | P. 03
shopbackyardpro.com
Assembly Instructions | 7
STEP 10
Connect air vent handles (13,15) to both side doors
(12,14) using BOLT A - 2 pcs and Nut C-4 pcs.
STEP 11
Insert left side door to hinges on the left side of the
grill body.
NOTE: Ensure air vent handle is facing towards the
installer and not the machine.
STEP 12
Insert right side door to hinges on the right side of
the grill body.
NOTE: Ensure air vent handle is facing towards the
installer and not the machine.

8 |Assembly Instructions
shopbackyardpro.com
STEP 13
Attach the left side lid lock handle to the side
panel closer towards the back panel. Install the
air vent to the side door using BOLT A-- 3 pcs NUT
C -- 3 pcs.
STEP 14
Attach the right side lid lock handle to the side
panel closer towards the back panel. Install the
air vent to the side door using BOLT A-- 3 pcs
NUT C -- 3 pcs.
STEP 15
Connect the middle support panel (18) to the grill
body using BOLT A -- 4 pcs.

Operating Instructions | P. 03
shopbackyardpro.com
Assembly Instructions | 9
STEP 17
Attach lid hinges (20) to the grill back panel
using BOLT B - 6 pcs.
STEP 18
Put the charcoal pans (21) on
charcoal pan support bar.
STEP 16
Attached the charcoal pan support bar
(19) to both front and side panel using
BOLT A - 10 pcs.

10 |Assembly Instructions
shopbackyardpro.com
STEP 19
Connect the grate holder handle (23) to the
grate holder (a22) using Bolt D - 16pcs and
LOCK PIN E - 8 pcs.
TIP: Insert Lock Pin E into the handle
before attaching in place with the hardware.
STEP 20
Position the grate holder into the grill body with
the lip facing upwards.
STEP 21
Insert the stainless steel grates (25) into
the lip of the grate holder.

Operating Instructions | P. 03
shopbackyardpro.com
Assembly Instructions | 11
STEP 23
Connect hinges (28) to the lid using
BOLT B - 6 pcs.
STEP 24
Attach grill lid to the grill body using SLEEVE
F - 3 pcs and Lock Pin E - 3pcs.
STEP 22
Fully remove the screw from the handle so that
the lid handle (27) can be connected to the lid
(26) using BOLT A -- 2pcs.

12 |Assembly Instructions
shopbackyardpro.com
STEP 25
Install the two thermometers (29) onto
the lid.
STEP 26
Attach the grill stacks (30) to the lid using
BOLT A -- 8 pcs and NUT C -- 8 pcs.

Operating Instructions | P. 03
shopbackyardpro.com
Assembly Instructions | 13
STEP 27
Install BOLT G to the lid using BOLT
G - 2 pcs and NUT C - 2 pcs. After
the grill is fully assembled, you can
open lock the lid in place by using the
handles on the side.
STEP 28
Insert the ash pan (31) into grill body
like shown in the picture.

14 |Assembly Instructions
shopbackyardpro.com
FULLY ASSEMBLED