Backyard Products HANDY HOME PRODUCTS MAJESTIC User manual

!
24/7 Support
help.backyardproducts.com
Business Hours
[phone]
Answers to frequently
asked questions
Monday - Friday ........... 8:00am - 6:00pm EST
Saturday - Sunday .................................Closed
Technical assistance and
how-to videos
Submit a help request
Request replacement parts
Did you enjoy building your shed?
JOIN OUR TEAM
AND MAKE UP TO $1,500/WEEK*
o
r
v
i
s
i
t
b
a
c
k
y
a
r
d
i
n
s
t
a
l
l
e
r
.
c
o
m
Flexible schedule No selling,
just building
Bonus incentives
available
S
c
a
n
t
h
e
f
l
o
w
c
o
d
e
t
o
a
p
p
l
y
t
o
d
a
y
.
INSTALLERS
WANTED
*based on number of completed installations
Call a Recruiter Today! 734-365-7000
STOP
DO NOT RETURN
TO THE STORE!
If you discover missing or damaged parts,
or if you have questions about the building process,
please reach out to us directly for the fastest service.
16566

(This page intentionally left blank.)

11/11/2022
KEEP THIS MANUAL FOR FUTURE REFERENCE
ACTUAL FLOOR SIZE IS 96" x 144" (244 x 366 cm)
16566
MAJESTIC 8' x 12' (244 x 366 cm)
ASSEMBLY MANUAL
A Backyard Products Company
BEFORE YOU BEGIN
IMPORTANT!
READ INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING ASSEMBLY.
• BUILDING RESTRICTIONS AND APPROVALS
Be sure to check local building department and homeowners association for specic restrictions and/ or requirements before building.
• ENGINEERED DRAWINGS
Contact our Customer Service Team if engineered drawings are needed to pull local permits.
• SURFACE PREPARATION
To ensure proper assembly you must build your shed on a level surface.
Recommended methods and materials to level your shed are listed on page 7.
• CHECK ALL PARTS
Inventory all parts listed on pages 4-6.
• ADDITIONAL MATERIALS
You will need additional materials to complete your shed. See page 3 for required and optional materials and quantities.
***CONTACT OUR CUSTOMER SERVICE TEAM
IF ANY PARTS ARE MISSING OR DAMAGED***
- Order form and warranty at back of manual -
Call: 1-734-242-6900 email: [e-mail]

2
TOOLS
Safety! Always use approved safety glasses during assembly.
OptionalRequired
HELPFUL REMINDER SYMBOLS
Look for these symbols for helpful reminders throughout this manual.
ORIENT LUMBER AND TRIM FOR BEST APPEARANCE
= Assistance Required; (2) or more people.
= Ensure squareness.
= Important required step or operation.
= Helpful assembly hint.
= Mark part with pencil.
= Beginning of steps for assembly or installation.
= You have  nished the assembly or installation.
= Level
❑Gloves
Framing lumber is graded for structural strength and not appearance. Exterior trim is graded for one good side.
Always install the material leaving the best edge and best surface visible. Please remember that these blemishes in no way
negatively affect the strength or integrity of our product. (See Fig. A, B, C.)
A
❑Safety Glasses
❑Tape Measure
❑ Paint Tools
❑Ladder
❑Caulk Gun
❑Hammer
❑Level
FINISH
BEGIN
❑ Pencil
❑ Phillips
Screwdriver
❑Drill / Driver
❑1/4" Drill Bit
❑3/8" Drill Bit
❑1/2" Drill Bit
❑ #2 Philips Drive Bit
❑Tool Belt/
Nail Pouch
❑Chalk Line
❑Nail Gun
• gun nails
❑Tin Snips
(for drip edge)
❑ Square or
❑Utility Knife
❑Shingle Blades
B C

3
COMPLETING YOUR SHED
You will need these additional materials:
TO VALIDATE YOUR WARRANY YOU MUST USE THE FOLLOWING ITEMS:
FOUNDATION OR FLOOR MATERIALS
ADDITIONAL MATERIALS
DRIP EDGE ..................... 50 Feet #15 ROOFING FELT
To cover 140 Sq. Ft. of roof area.
REFER TO THE BACK OF THIS MANUAL AND THE MANUFACTURER’S INSTRUCTIONS FOR
INSTALLATION OF SHINGLES, DRIP EDGE AND FELT.
• This kit includes a complete oor.
• This shed kit does not include ANY leveling materials.
• See the FLOOR LEVELING section on page 7 for recommended methods and suggested materials to properly level your
oor, as this will vary depending on your specic site.
3-TAB SHINGLES ............................. 6 Bundles
PAINT FOR SIDING .......................... 2 Gallons
Use 100% acrylic latex exterior paint. (2) coats recommended.
CAULK ................................................. 3 Tubes
Use acrylic latex exterior caulk that is paintable.
1" GALVANIZED ROOFING NAILS....... 3 Lbs
For shingles.
PAINT FOR TRIM ..................................1 Quart
Use 100% acrylic latex exterior paint.
1" GALVANIZED ROOFING NAILS.........1/4 Lb
For roong felt.
REINFORCED WOOD FLOOR FRAME (OPTIONAL)
IMPORTANT! This oor has been designed for general use. Depending on your specic use you may want to construct a heavy
duty oor frame by adding additional oor joists (shown below as shaded). Below is a list of additional materials (not included):
x3
x12
2 x 4 x 8' (5 x 10 x 96 cm) Treated Lumber
Cut to 2 x 4 x 93" (5 x 10 x 236,2 cm)
ea. 3" (7,6 cm) Hot Dipped Galvanized Nails
Optional 12" (30,5 cm) spacing
Standard 16" (40,6 cm) spacing

4
PARTS IDENTIFICATION AND SIZES
RS RS
Part identication
letters are stamped on some parts.
Check these locations for
part stamp.
Treated lumber is stamped:
All treated lumber
is stamped:
WALLS
x1 2 x 3 x 31" (5 x 7,6 x 79 cm)
AQ
x14 2 x 3 x 78-1/2" (5 x 7,6 x 199 cm)
FU
x2 2 x 3 x 82-1/2" (5 x 7,6 x 210 cm)
FV
x2 2 x 3 x 91" (5 x 7,6 x 231 cm)
PS
x1 2 x 3 x 84" (5 x 7,6 x 213 cm)
FW
x4 2 x 3 x 96" (5 x 7,6 x 244 cm)
PT
x2 2 x 4 x 96" (5 x 10 x 244 cm)
TP
x2 2 x 3 x 13" (5 x 7,6 x 33 cm)
RK
x4 2 x 3 x 48" (5 x 7,6 x 122 cm)
NK
x1 2 x 3 x 23" (5 x 7,6 x 58 cm)
FR
x1 2 x 4 x 64" (5 x 10 x 162,5 cm)
UX
x2 2 x 3 x 35-1/4 " (5 x 7,6 x 89,5 cm)
FS
PARTS LIST
INVENTORY YOUR PARTS before you begin.
We suggest sorting parts by the category they are listed in.
TRIM
ZJ
x2 5/8 x 2-1/2 x 72" (1,6 x 6,3 x 183 cm)
AWR
x2 2 x 3 x 41-7/8" (5 x 7,6 x 106 cm)
x4 3/8 x 1-3/4 x 82-1/4" (0,9 x 4,4 x 209 cm)
x2 2 x 4 x 48-3/4" (5 x 10 x 124 cm)
AN
x3 5/8 x 2-1/2 x 9" (1,6 x 6,3 x 23 cm)
EY
HTA
x4 2 x 4 x 59-1/8" (5 x 10 x 150 cm)
3/4" (1,9 cm)
GAUGE BLOCK FOR 3/4" (1,9 CM) MEASUREMENT.
x1 1 x 3 x 5" (2,5 x 7,6 x 12,7 cm)
GAA
x1 1 x 3 x 12" (2,5 x 7,6 x 30,5 cm)
DI
x1 2 x 3 x 9" (5 x 7,6 x 23 cm)
NA
x2 3/8 x 1-3/4 x 80-7/8" (0,9 x 4,4 x 205,4 cm)
Left
x2 3/8 x 1-3/4 x 80-7/8" (0,9 x 4,4 x 205,4 cm)
Right
FLOOR
x10 2 x 4 x 93" (5 x 10 x 236 cm)
x2 2 x 4 x 48" (5 x 10 x 122 cm)
x2 2 x 4 x 96" (5 x 10 x 244 cm)
WOOD SIZE CONVERSION CHART
Nominal Board Size Actual Size
1 x 4
.................3/4" x 3-1/2" (1,9 x 8,9 cm)
2 x 4 ..............1-1/2" x 3-1/2" (3,8 x 8,9 cm)
2 x 3 ..............1-1/2" x 2-1/2" (3,8 x 6,3 cm)
1 x 3 .................3/4" x 2-1/2" (3,8 x 6,3 cm)
19/32 x 2-1/2 x 28-1/8" (1,5 x 6,3 x 71,4 cm)
x2 DT
19/32 x 2-1/2 x 30-1/8" (1,5 x 6,3 x 76,5 cm)
x2 AZ
x2 2 x 3 x 22-1/2" (5 x 7,6 x 56 cm)
LV

5
RAFTERS
x3 JF 1 x 4 x 60" (2,5 x 10 x 152 cm)
x10 6" x 24" (15 x 61 cm)
x10 2 x 4 x 55-3/16" (5 x 10 x 140 cm)
AA
DOORS
PARTS LIST continued...
SHELF
x1 2 x 3 x 28-5/8" (5 x 7,6 x 73 cm)
FQ
x5 2 x 3 x 96" (5 x 7,6 x 244 cm)
PT
x2 2 x 4 x 96" (5 x 10 x 244 cm)
TP
PANEL PARTS LIST
ROOF PANELSFLOOR PANELS
NOTE: Panel parts are not stamped.
Roof panels are 7/16" (1,1 cm) thick.
7/16 x 11-1/4 x 25-3/4"
(1,1 x 29 x 65,4 cm)
x4
7/16 x 11-1/4 x 96"
(1,1 x 29 x 244 cm)
x2
7/16 x 25-3/4 x 48"
(1,1 x 65,4 x 122 cm)
x4
7/16 x 48 x 96"
(1,1 x 122 x 244 cm)
x2
5/8 x 48 x 96"
(1,6 x 122 x 244 cm)
x3
SHELF PANELS
Shelf panels are 7/16" (1,1 cm) thick.
7/16 x 11-7/8 x 96"
(1,1 x 30 x 244 cm)
x2
7/16 x 23-7/8 x 91"
(1,1 x 61 x 231 cm)
x1
7/16 x 44-1/4 x 48"
(1,1 x 112 x 122 cm)
x2
OO
x2 1-1/2 x 2-1/2 x 69" (3,8 x 7,6 x 175,3 cm)
Floor panels are 5/8" (1,6 cm) thick.

6
NOTE:
If you are using a nail gun, nails
may be used where screws are
shown for quicker assembly.
Length of nail must match screw length.
3" (7,6 cm)
2" (5,0 cm)
x3 BOXES
x5 BOXES
WALL PANEL & DOORS PARTS LIST
x5
3/8 x 48 x 84"
(1 x 122 x 213 cm)
x1 x1 x1
x2x2
x1
LEFT DOOR
x1
RIGHT DOOR
x120
x133
x85
x110
x28
x70
DOOR HARDWARE, WINDOWS, VENTS, RAMPS
FASTENER/HARDWARE BAG (Shown Actual Size)
1-1/4" (3,2 cm)
2" (5,0 cm)
3" (7,6 cm)
3/4" (1,9 cm)
2" (5,0 cm)
1-1/2" (3,8 cm)
NOTE: Panel parts are not stamped.
x1
x2
x2
1" (2,5 cm)
1-1/4" (3,2 cm)
x2
x8
1" (2,5 cm)
x2
x1x1
x2
x1
x12
1/2" (1,3 cm)
x2

7
FLOOR LEVELING OPTIONS
There are multiple ways to level your oor frame. Our recommended leveling method is shown below.
Leveling materials are not included in this kit.
• Level under 4x4 runners only.
• Locate leveling material 12" from ends of runners and no more than 48" apart.
• Asphalt shingles should be used between 4x4 runners and blocks or treated lumber. Never use
shingles in direct contact with ground.
• For best results and aiding in water drainage use gravel under each concrete block.
LEVELING METHODS
• If you are building your shed on a concrete foundation see the following page.
CONCRETE
Use only wood treated for ground contact and fasteners approved for use with treated wood.
Always support frame seams.
Leveling higher than 16" not recommended.
LEVELING MATERIALS
Gravel
2x4 Treated Lumber
Solid Masonry Blocks in 1", 2", 4" or 8" thickness
Asphalt Shingles
8" Block
4" Block
Gravel
Gravel
Do not exceed 16".
4x4 Runner
Shingle
Shingle
Maximum between leveling
material locations.
48"
12"
2x4 Treated Lumber
2" Block
Level
12"
PREFERRED METHOD - 4x4 TREATED RUNNERS
Measurements to
centers of 4x4's.
• 3" Screws angled into 4x4.
• (2) at each point frame
• and 4x4 touch.
12"
(30,5 cm)
12"
(30,5 cm)
MATERIAL REQUIRED
x2 4 x 4 x 12' (10 x 10 x 366 cm) Treated Lumber
Fasteners for Frame to 4 x 4.
(3" Screws shown as one option.) Minimum (40) 3" screws / exterior grade.

8
CONCRETE FOUNDATION
If you choose to install your kit on a concrete slab refer to the diagram below.
• A treated 2 x 4 (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Hint: Use treated lumber in your kit or purchase full length treated lumber.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4 (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
NOTES
Allow new concrete slabs to cure for at least seven (7) days.
2 x 4 x 12' (5,1 x 10,2 x 344,5 cm)
2 x 4 x 8' (5,1 x 10,2 x 244 cm)
Caulk
Requires:
x2
x2
x1
MUST be treated lumber.
MUST be treated lumber.
96" (243,2 cm)96" x 144" (243,2 x 365,8 cm) 137" (348 cm)8' x 12' (243,2 x 365,8 cm) 144" (365,8 cm)
AActual Size B CBuilding Size
A
B
C
4"
(10,2 cm)
3-1/2"
(8,9 cm)
DOOR
Treated Sill Plate
Caulk between sill
plate and concrete.

9
93"
(236,2 cm)
1-1/2"
(3,8 cm)
96"
(243,8 cm)
144"
(403,9 cm)
128"
(325,1 cm)
112"
(284,5 cm)
48"
(121,9 cm)
48"
(121,9 cm)
64"
(121,9 cm)
80"
(203,2 cm)
96"
(243,8 cm)
48"
(121,9 cm)
32"
(81,3 cm)
16"
(40,7 cm)
96"
(243,8 cm)
3" (7,6 cm)
x44
PARTS REQUIRED:
Center
on marks
FLOOR FRAME
Look for
Stamp
TREATED
HINT:
For easier nailing
stand on frame.
Arrange parts as shown on a  at surface. Measure and mark.
Secure with (2) 3" nails at each mark.
Your  oor frame is now assembled. Proceed to level and square frame.
FINISH
BEGIN
1
3" (7,6 cm)
Nails
SEAM
Flush
Flush
x10 TREATED
2 x 4 x 93" (5,1 x 10,2 x 236,2 cm)
TREATED
x2
2 x 4 x 96" (5,1 x 10,2 x 243,8 cm)
TREATED
x2
2 x 4 x 48" (5,1 x 10,2 x 121,9 cm)

10
FINISH
LEVEL AND SQUARE FLOOR FRAME
Before attaching  oor decking, it is important to level and square the  oor frame.
A level and square  oor frame is required to correctly construct your shed.
BEGIN
2
3
1
Ensure that the frame is level before installing  oor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the same, the
frame is square. The diagonal measurement will be approximately 173-1/16" (440 cm).
When the frame is level and square, secure one side of frame to the 4x4 runners with one fastener at ends of each
runner. Move to the opposite end of the frame. Secure the frame to 4x4 runners with one fastener at ends of each
runner making sure the frame remains square (Fig. A).
After the  oor frame is level and square, fasten the frame to the 4x4 runners at each point where the frame
contacts the 4x4 runners.
See page 8 for the preferred  oor leveling method.
First, secure
at ends with
one fastener.
Second, secure
at ends with
one fastener.
173-1/16"
(440 cm)
173-1/16"
(440 cm)
Fig. A

11
DOOR
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until the top corner is ush to the oor frame (Fig. B).
Secure panel with (2) 2" nails in the corners.
2
BEGIN
1
3
4Continue attaching the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Fig. A
Fig. B
Fig. C
Ensure the oor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your oor frame is square. The measurement will be approximately 170-1/16" (440 cm) (Fig. C).
PARTS REQUIRED:
x1
x62
5/8 x 48 x 96"
(1,6 x 121,9 x 243,2 cm)
2" (5,1 cm)
Flush
Flush
Flush
Flush
Flush
(2) Nails
(2) Nails
FLOOR PANELS
3/4"
(1,9 cm)
DOOR
173-1/16"
(440 cm
173-1/16"
(440 cm
Install (1) 48" x 96" panel with the 48" edge and corner ush to the oor frame (Fig A).
Secure panel with (2) 2" nails in the corners.
Ensure your wall frame is square by installing one panel and squaring frame.
Install panels with rough side up (painted grid lines).
BEGIN HERE
3/4" GAUGE
BLOCK
3/4"
(1,9 cm)
3/4" Gauge
Block
For squareness maintain 3/4" measurement
and ush along panel edges.

12
6"
(15,2 cm)
12"
(30,5 cm)
x2
PARTS REQUIRED:
FINISH
Your  oor panels are installed.
Install next 48" x 96" panel  ush to installed panel. Install middle panel  rst.
Secure with 2" nails 6" spaced apart on edges and 12" apart inside panels.
Install last 48" x 96" panel  ush to installed panel.
Secure with 2" nails 6" spaced apart on edges and 12" apart inside panels.
5
6
x110 2" (5 cm)
FLOOR PANELS
FlushFlush
Flush Flush
5/8 x 48 x 96"
(1,6 x 122 x 244 cm)
DOOR
Flush Flush

13
DOOR
Back Wall
Front Wall
Side Wall
Side Wall
Ensure that the oor frame is level after installing oor panels.
Re-level if necessary.
HINT:
IMPORTANT!
• Use the oor as a stable work surface for wall construction.
• Organize your assembly procedure during the build process
to avoid over-handling of the walls.

14
144"
366 cm
120"
305 cm
96"
244 cm
96"
244 cm
72"
183 cm
48"
122 cm
48"
122 cm
48"
122 cm
24"
61 cm
78-1/2 "
199 cm
PARTS REQUIRED:
x14 2 x 3 x 78-1/2" (5 x 7,6 x 199 cm)
FU
x4 2 x 3 x 96" (5 x 7,6 x 244 cm)
PT
x4 2 x 3 x 48" (5 x 7,6 x 122 cm)
NK x64 3" (7,6 cm)
SIDE WALL FRAMES
FU x7
NK
PT
PT
NK
HINT:
For easier nailing
stand on frame.
BEGIN
1
Secure with (2) 3" nails at each mark.
Build two identical side wall frames.
Arrange parts on edge on  oor. Measure and mark.
SEAM
Offset Seam
Offset Seam
Your (2) side wall frames are now assembled.
FINISH

15
48"
(122 cm)
3/4"
(1,9 cm)
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
12"
(30) cm
6"
(15 cm)
For squareness maintain the 1-1/2"
measurement along top of panel and 3/4"
along panel edge.
LEFT SIDE WALL PANELS
PARTS REQUIRED: x45 2" (5 cm)
Fig. B
Fig. A
1-1/2"
(3,8 cm)
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
3/4"
(1,9 cm)
2 Nails
2 Nails
2 x 3 x 13" (5 x 7,6 x 33 cm) as SPACER
x1 RK
Install (1) 48 x 84" panel on wall frame, as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud.
Use RK as a 1-1/2" gauge block at top.
Secure panel with (2) 2" nails in the corners (Fig. A).
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Ensure your wall frame is square by installing one panel and
squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever
move the panel side-to-side until you have a 3/4" measurement on the
wall stud. Secure corner with (2) 2" nails (Fig. B).
2
3
3/4" GAUGE
BLOCK
3/4"
GAUGE
BLOCK
HINT: Use RK
as 1-1/2" gauge.
BEGIN HERE
GAA
Install all panels with the primed side facing up.
BEGIN
1
48 x 84"
122 x 213 cm)
x1

16
1-1/2"
(3,8 cm)
3/4"
(19 mm)
48"
(122 cm)
12"
(30 cm)
6"
(15 cm)
Flush
For squareness maintain the
1-1/2" measurement along top
of panel and 3/4" along panel
edge.
For squareness maintain the
1-1/2" measurement along top
of panel and 3/4" along panel
edge.
HINT:
Use RK as
1-1/2" gauge.
HI NT:
Use RK as
1-1/2" gauge.
Install the middle 48"x 84" panel  ush to
installed panel.
Secure with 2" nails spaced 6" apart on
edges and 12" apart inside panel.
4
5
Go to next page to install right side wall panels.
x90
LEFT SIDE WALL PANELS
PARTS REQUIRED: 2" (5 cm)
2 x 3 x 13" (5 x 7,6 x 33 cm) as SPACER
x1 RK
Carefully  ip the side wall over.
3/4" GAUGE
BLOCK
GAA
Flush
Flush
Flush
6" (15,2 cm)
1-1/2"
(3,8 cm)
12"
(30,5 cm)
x1
48 x 84"
122 x 213 cm)
x1
Install the 48" x 84" panel with window
cutout  ush to installed panel, as shown.
Secure with 2" nails 6" spaced apart on
edges and 12" apart inside panels.

17
48"
(122 cm)
3/4"
(1,9 cm)
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
12"
(30) cm
6"
(15 cm)
For squareness maintain the 1-1/2"
measurement along top of panel and 3/4"
along panel edge.
RIGHT SIDE WALL PANELS
48 x 84"
122 x 213 cm)
PARTS REQUIRED:
x1
x45 2" (5 cm)
2 x 3 x 13" (5 x 7,6 x 33 cm) as SPACER
x1 RK
Install (1) 48 x 84" panel on wall frame, as shown.
Use the gauge block to mark the 3/4" measurement on the wall stud.
Use RK as a 1-1/2" gauge block at top.
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Secure the panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
3/4" GAUGE
BLOCK
3/4"
GAUGE
BLOCK
HINT: Use RK
as 1-1/2" gauge.
BEGIN HERE
GAA
BEGIN
1
Square your right wall frame as shown on page 16.

18
1-1/2"
(3,8 cm)
3/4"
(19 mm)
48"
(122 cm)
12"
(30 cm)
6"
(15 cm)
Flush
1-1/2"
(3,8 cm)
48"
(122 cm)
12"
(30 cm)
6"
(15 cm)
Flush
For squareness maintain the
1-1/2" measurement along
top of panel and 3/4" along
panel edge.
For squareness maintain the
1-1/2" measurement along
top of panel and 3/4" along
panel edge.
HINT:
Use RK as
1-1/2" gauge.
HINT:
Use RK as
1-1/2" gauge.
Install the middle 48"x 84" panel  ush to
installed panel.
Secure with 2" nails spaced 6" apart on
edges and 12" apart inside panel.
2
Install last 48"x 84" panel  ush to
installed panel.
Secure with 2" nails spaced 6" apart on
edges and 12" apart inside panel.
5
x90
RIGHT SIDE WALL PANELS
48 x 84"
122 x 213 cm)
PARTS REQUIRED:
x2
2" (5 cm)
2 x 3 x 13" (5 x 7,6 x 33 cm) as SPACER
x1 RK
Carefully  ip the side wall over.
3/4" GAUGE
BLOCK
GAA
Your left and right side walls are now completed.
FINISH