Badger Air-Brush ASPIRE TC908 User manual

MODEL TC908 ASPIRE
INSTRUCTION MANUAL
Please thoroughly review Instruction Manual carefully before operating your new compressor.

1. Air pressure gauge, air filter, pressure adjustable.
2. Piston type; oil-less compressor
3. Immediate pressure with continuous air flow
4. Auto start and auto stop function.
5. Thermal protection
6. Low noise, 62db.
Airbrush compressor TC908, together with airbrush, can be widely used in craftwork spraying, cosmetics,
tattoo, tanning, hobbies/models, fingernail painting. It can be also used for providing air source for medical,
environment protect, breed aquatics Industrial, food Industrial, chemical industrial, laboratory and so on.
Type: Single Cylinder Piston Compressor
Power: 1/6 HP
Speed: 1700 r.p.m
Air output per min./liters: 20~23L/min
Autostop,startat 3bar(43psi),stopat 4bar(57psi)
Working pressure: 0~4bar
Weight: 7.93 Lbs. 3.6 kgs.
Suitable for airbrush with nozzle 0.2MM~1.0MM.
1. The TC908 air compressor has a 1/8” BSP outlet with an attached 1/4” NPSM adaptor.
2. Attachairbrushto air hose;connect the air hoseto the air compressor, plug into powersupply. To start
compressor,press powerswitch on top of compressor to “on”.
3. Check for air leaks. If the compressor frequently starts and stops there may be an air leak at one of the
connections. Be sure airbrush to air hose and air hose to air compressor connections are firmly tightened.
The use of PTFEtape on the connections will help prevent leakage.
4. There is a difference between maximum pressure and working pressure. A compressor’s maximum
pressure is the highest pressure it can produce. When an airbrush is connected to the compressor and
activated, the compressed air initially released through the airbrush nozzle is the maximum pressure. In
contrast, the working pressure is the constant pressure the compressor will maintain while airbrushing.
The level of the working pressure depends on the diameter of the airbrush nozzle; the larger the nozzle,
the greater the amount ofair released, which will lower the compressor’s working pressure.
1. Features:
2. Application Field:
3. Specification:
4. Operation directory:
***NOTE: The factory setting for all pressure regulators is such that the pressure adjusting knob is fully
tightened (Max PSI); if a lower working pressure is desired, begin turning the pressure adjusting knob
counterclockwise until the needle located on the pressure gauge has reached the desired pressure. It may
take several counterclockwise turns before the pressure gauge reading begins to change. ***

1. Alwayschoose the appropriate air compressor with suitableair flow and pressureaccording to the actual
working requirement.
2. Before connecting the compressor, check that the voltage is in compliance with the electrical requirements of
the compressormotor.
3. Please follow local electrical regulations and safety precautions. If socket/adapter is used it must be
grounded.
4. Never leave the compressorexposed to excessive dust, acids, vapors, explosive or flammable gasses or
atmospheric agents (rain, sun, fog,snow).
5. The compressor must be used in suitable environments, well-ventilated with an ambient temperature
between 41 degrees F (5 C) and 104 degrees F (40 C)
6. Never use the compressor when bare foot; avoid contact with wet hands or feet.
7. Never allow children to touch the compressor while unit is in operation. Do not place any foreign objects in
the compressor which may cause burns or electricshock.
8. Makesure you store the compressor in well ventilated and dry place.
Your BADGER AIR-BRUSH CO. compressor is warranted from defects in material and workmanship for a
period of one (1) year from date of purchase.
A compressor failing within the warranty period due to defects in material and/or workmanship will be
repairedor replaced (at Badger’s discretion) without charge to the purchaserwhen returnedwith proof of
purchase to BADGER AIR-BRUSH CO. Transportation to Badger is pre-paidby purchaser.
This warranty excludes compressors which have been subjected to corrosion, negligence, accident, or units which
have been altered or abused in any way. All Badger products have a lifetime labor warranty.
BADGER AIR-BRUSH CO.
9128 BELMONT AVE.
FRANKLIN PARK, IL 60131
5. Notice:
6. Warranty (Continental U.S.A.)

7. Spare parts list: