Bakker Hydraulic Products PK12 User manual

USERS MANUAL
PALLET HOOK
PK

2
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
USERS MANUAL PALLET HOOK WITH CLAMP
All in this Users manual contained technical information and
technological information also any possible drawings given by us and
further technical descriptions stay owned by Bakker Hydraulic
Products BV and are not allowed without written permission to be
used (other than necessary for using the installation), copied,
duplicated, passed, given or brought to the notice of other people.
The list with spare parts may only be used by maintenance personal
of the installation and those who are taking care of ordering the spare
parts.
Bakker Hydraulic Products BV is not liable for any consequential
damage which could occur when there is a breakdown of the pallet
hook (for instance damage to cargo or damage because work has
stopped).
BEFORE USING THE INSTALLATION YOU HAVE TO READ THIS USERS
MANUAL PROPERLY. MAKE SURE YOU WELL ONDERSTAND THE
WORKING EN HOW TO USE THE INSTALLATION. FOLLOW THE
INSTRUCTIONS CAREFULLY.

3
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
TABLE OF CONTENTS USERS MANUAL
1. GENERAL INFORMATION
➢1.1 Introduction 4
➢1.2 Address and telephone numbers for support 4
➢1.3 General information 4/5
➢1.4 Description pallet hook PK 5
➢1.5 Technical specifications pallet hook PK 6
2. ORDERS AND INSTRUCTIONS FOR SAFETY
➢2.1 Introduction safety precautions 6
➢2.2 Safety precautions when working the machine 6
➢2.3 Safety precautions during maintenance and
Technical failure 6
➢2.4 Dissuaded using 7
3. USING THE PALLET HOOK WITH CLAMP
➢3.1 Connecting the pallet hook with clamp 7
➢3.2 Working and operation of the pallet hook with clamp 7
4. MAINTENANCE, DISTURBANCE AND REPAIR
➢4.1 General maintenance demands 7
➢4.2 Maintenance schedule 8
➢4.3 Malfunction 8
5. SPARE PARTS 8
6. WAREHOUSING AND TRANSPORTATION 8
7. SUPERANNUATED PRESCRIPTIONS 9
8. DIMENSIONAL DRAWING 9
9. EXPLODED VIEW AND PARTS LIST 10

4
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
1. BASIC INFORMATION
1.1 Introduction
This manual gives information about the handling, maintenance and
working of the pallet hook with clamp in his original size.
There cannot be any claims about the construction or delivery of the
pallet hook with clamp regarding this manual.
Bakker Hydraulic Products BV has the exclusive copyright of this
manual. Copies can be ordered at Bakker Hydraulic Products BV
against the normal price.
1.2 ADDRESS AND PHONE NUMBERS FOR SUPPORT
When there are any complaints about the working system of the
pallet hook with clamp or maintenance you always have to get in
contact with your local dealer.
1.3 BASIC INFORMATION
All in this manual published data is based on the most relevant
information.
They are given under reservation of modification afterwards.
We preserve the right to change the construction at any given time,
without the obligation to change deliveries earlier made.
This manual gives you useful and important information for using
your installation. It also contains important information about the
pallet hook with clamp during the preparation for use and when using
the installation, to prevent injuries and any serious damages. This is
to guarantee a safe and a trouble-free function from your installation.
And so like all other installations the pallet hook with clamp needs
periodical maintenance. This manual provides you with the
necessary information containing periodical maintenance.

5
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
The parts list which is enclosed will provide you with necessary
information about which parts you can eventually replace.
If there are any questions or you wish further explanation containing
specific subjects regarding your pallet hook, don't hesitate to contact
someone of our staff.
Finally we bring to your attention that the warranty is not valid if :
➢service and maintenance are not conducted according
regulations, repairs are not conducted by our staff or conducted
without our foregoing written consent.
➢alterations to the installation are made without our foregoing
written consent.
➢not the original parts or other than the prescribed parts and
lubricants are used.
➢the installation injudicious, careless or not in inconsistent with its
nature or destination is being used.
Furthermore are the general terms of delivery Metaalunie applicable.
1.4 DESCRIPTION PALLET HOOK PK
The pallet hook with clamp is a mechanical working installation.
The pallet hook is equipped with two forks, which have to be placed
under the cargo you want to lift.
Purpose of the clamp is to keep the fork in balance with or without a
cargo.
Operating the pallet hook can only be done with the use of external
aids.

6
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
1.5 TECHNICAL SPECIFICATIONS OF THE PALLET HOOK PK
Type: PK12 PK22 PK 32
Weight: 175 kg 200 kg 225 kg
Capacity: 1200 kg 2200 kg 3200 kg
2 ORDERS AND INSTRUCTIONS FOR SAFETY
2.1 General safety introduction
During the design of the pallet hook with clamp a great deal of care
for safety has put in. These safety measures lead to the construction,
choice of materials and operation of the pallet hook as it is now.
Knowing that the pallet hook with clamp will be used mostly in the
transport industry relevant safety measures will have to be made.
2.2 Safety measures when operating the machine
While operating the pallet hook with clamp following safety measures
have to be taken in account.
➢Adequate distance!
➢Never walk or stand under the cargo
➢There are no persons allowed in the danger zone
2.3 Safety measures during maintenance or a technical failure
The pallet hook must be on the floor during periodical maintenance,
solving a problem or during repairs. During these activities the pallet
hook must be at all times disconnected from the external machine. At
no time is it allowed to do any of these activities when the pallet hook
or the external machine is operational.

7
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
2.4 Dissuaded using
Any activity which does not conform with nature and specifications of
the pallet hook with clamp and everything not explicit named in this
manual. In doubt always contact Bakker Hydraulic Products BV.
3 USING THE PALLET HOOK WITH CLAMP
3.1 Connecting the pallet hook PK
Each pallet hook with clamp is standard fitted with a suspension. The
suspension needs to be fitted to the external machine.
3.2 Working and using the pallet hook PK
The pallet hook is mounted with a clamp to keep the forks with or
without cargo in balance.
➢By loosening the lock bolts the forks can be adjusted in any width
you want. When you are satisfied with the width you must tighten
the lock bolts.
➢The upper arm needs to be pulled up carefully, after the lock pin
is removed.
➢Mount the lock pin and hairspring pin after adjusting the right
height.
Be sure that the forks are fully placed under the cargo!
Take your distance!
4 MAINTENANCE, DISTURBANCE AND REPAIR
4.1 General maintenance demands
In general the following demands apply:

8
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
➢The pallet hook needs to be kept clean to assure the right
operation.
4.2 Maintenance schedule
- After 20 working hours, check all bolted connections and tighten if
necessary.
In this chapter you will find a schedule which is your guide for the
necessary maintenance for your pallet hook with clamp.
Component Action Frequency
Turning points Check the tolerances once a week
Forks Check for damages and cracks once a week
Clamp Check for damages once a week
Pins Check for wear once a week
Welds Check for wear end cracks once a month
Further it is necessary that your pallet hook has an annually check-up
every year and the pallet hook has to be examined yearly.
4.3 Malfunction
The eventually appearing malfunctions can only be mechanical.
5 SPARE PARTS
If there are parts that need to be replaced on the pallet hook with
clamp, at all times use original parts.
6 WAREHOUSING AND TRANSPORT
During periods that the pallet hook with clamp is not used it must be
stored carefully. Necessary is that the pallet hook is placed in a
closed space which is forbidden for unauthorized people. The pallet
hook needs to be carefully placed so no damages can occur.
The pallet hook needs to be transported properly by the owner/user
or a third party, so the pallet hook cannot be damaged.

9
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
1690 - 2290
1250 - 1850
988
1112
1200
200 - 1015
7 SUPERANNUATED PRESCRIPTIONS
If the pallet hook with clamp is damaged irreparable, it needs to be
destroyed. The parts of the pallet hook need to be properly disposed
off to the channels therefore intended.
If there are any points regarding this issue or any questions please
ask a Bakker expert.

10
© 2010 Bakker Hydraulic Products BV
Nijverheidsweg 6
6662 NG Elst (Gld) The Netherlands
Tel : + 31 481 374757 Fax : + 31 481 375280
Site : www.bakker-hydraulic.com E-mail : info@bakker-hydraulic.com
7312
9018
7313
9432
7316
1818021
7565
7314
7315
7566
7305
31000019
7301
7304
9011
7260 2 BOLT
7301 2 BOLT
7304 1 FRAME
7305 2 FORK
7312 1 SUSPENSION
7313 2 SPACING RING
7314 4 SIDE PLATE CLAMP
7315 4 STRIP CLAMP
7316 1 SLIDE PIECE
7565 2 BOLT
7566 4 BOLT
9011 1 PIN
9018 2 HAIRSPRING PIN
9432 6 NUT
1818021 1 PIN
PART N° QUANTITY SPECIFICATION
SPARE PARTS
This manual suits for next models
2
Table of contents
Popular Rack & Stand manuals by other brands

Jackson
Jackson 436DL Operating, Safety and Parts Manual

Displays2go
Displays2go FGAHSCBDK Assembly instructions

DBI SALA
DBI SALA Flexiguard 8530564 installation instructions

Titan Fitness
Titan Fitness T-2 Series Operator's manual

Garmin
Garmin Montana 600 installation instructions

Warn
Warn 106204 installation instructions