SATRI Headphone Amplifier HPA-01M
3
LISTENING
SPECIFICATION
WARRANTY INFORMATION
After you have successfully installed all the necessary connections, you can turn on
the HPA-01M to start listening. Please follow the steps below to protect any possible
accident or damage.
1Ensure every connection – source input and headphone output are properly connected.
2Turn on the source equipment first. Make sure the gain knob is at its minimum position.
3Turn on the main power switch located on the front panel and the LED should light up.
4Slowly turn the gain knob from left to right to increase the gain level.
5You should hear sound coming out from the headphones. Please set your desired gain level.
●
Input 1 Voltage (3.5mm Mini Jack)
●
Input Impedance 10 KΩ(Voltage)
●
Output Current / Voltage (simultaneous)
●
Gain High / Low switchable (current output only)
●
Maximum Power Output 350 mW (32 Ω, 1 kHz)
●
Frequency Response 10 Hz ~ 1 MHz
●
Battery Type Li-ion
●
Battery Operate Time Up to 8 and a half hours
●
Battery Recharge Time 2 hours (80% capacity) / 3 and a half hours (full capacity)
●
Dimensions 95 mm (W) x 140 mm (D) x 17.5 mm (H)
●
Shipping Weight 1.0 kg
* Remarks: Bakoon Products International reserves the right to change
its product specifications at any time
Bakoon Products International provides parts and labor free of charge for any manufacturing
defects during the first two years after purchase, and six months for consumables such as battery.
The warranty is not transferrable and is limited to the original purchaser in the country of purchase,
provided that the product was purchased from an authorized dealer. Please keep a copy of the
sales receipt to verify such conditions.
Bakoon Products International takes no responsibility for any defect from accident, modification,
misuse, abuse, wear and tear or neglect by the user, or any damage or loss resulted during any
transit or shipment for repair. Servicing from unauthorized servicing personnel or from the user would
also void the warranty. There are no user-serviceable parts inside and all servicing inquiries should
be submitted to authorized dealers only.
The product should be packed and returned in the original packing box to the original dealer of
purchase. All the transportation costs are responsible by the user, and it is important to fully insure
the package against any possible damage or loss during the shipment.
The warranty ends after two years from the original purchase date. After this period, the user is
responsible for both parts and labor costs. It does not cover the transportation and insurance
costs at any period.
For any technical support inquiries, please contact your dealer first. If the dealer is unable to
answer your inquiries, please contact Bakoon Products International directly. The contact listings
of your dealer and us can be also found on our official website at www.bakoonproducts.com.
