Ballard Designs LA234 User manual

PRODUCT NAME: Xander Task Lamp
ITEM NUMBER: LA234
ASSEMBLED DIMENSIONS: 28”H x 7 1/2”W x 7 1/2”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE. Page 1 of 3
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN CHINA
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 60 Watt MAX Type A INCANDESCENT Bulb (NOT Included).
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.

Remove all parts, hardware and protective packaging from
carton and carefully arrange on a clean, level surface.
NOTE: To avoid accidentally discarding small parts or
hardware, retain all carton contents until after assembly
and installation are complete.
Recommended Location for Use: Dry Indoor Environment
PARTS
Check to make sure you have the following:
Page 2 of 3
NOT INCLUDED:
1-60 Watt Max
Type A Incandescent Bulb
*LED may be used
1- Metal Shade
1 - Socket Ring
1 - Fixture Body
NOTE
- The Qi Wireless charger works with Qi enabled devices such as Samsung Qi enabled
Smartphones and Apple iPhone 8 or above.
- Qi Wireless Pad: Input: 5V/2A Output: 5W MAX
- Be certain no other objects are on charging pad. Phone case may impede charging.
Remove case if necessary.
(A)
(B)

Page 3 of 3
STEP 1: ATTACH SHADE
NOTE: Unplug lamp prior to installation or removal. Turning off switch is not sufficient.
Gently remove Socket Ring (B) from Socket.
Slide Shade (A) over Socket and replace and
tighten Socket Ring by turning clockwise.
NOTE: Do not over tighten.
STEP 2: INSTALL BULB
STEP 3: CHARGING
Gently turn bulb into socket. Socket has
been rated up to a 60 Watt MAX
Type A INCANDESCENT Bulb (NOT Included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
(A)
(B)
*NOTE: If you need more brightness than an
incandescent 60W switch to a higher
equivalent LED or CFL bulb, which can provide
4-5 times the illumination (lumens) without
exceeding your fixture's maximum wattage.
USB port also available for charging a
device. Do not overcharge.
NOTE: To protect and preserve battery
memory, do not store or leave phone on Qi
charger for long periods.