Balt PBL User manual

Assembly Instructions
See back for important information
PBL
Adjustable Height
Presentation Stand

P-1 Leg Frame 2 EA
P-2 Stability Panel 2 EA
P-3 Top Platform 1 EA
P-4 Upper Insert 2 EA
P-5 Laptop Platform 1 EA
Tools Required: Philips Head Screw Driver
A Flat Head Screw 16EA
B Interior Threaded Post 8 EA
C 3”LockingCasters (for Front) 2 EA
D 3”Casters(for Back) 2 EA
E AllenWrench 1 EA
F CasterWrench 1 EA
G Knob 2 EA
Part Drawing Description Qty
Adjustable Height Presentation Stand PBL
Hardware List
To Assemble:
1. Identify and Separate all the Parts and
Hardware.
2. Place the Top Platform (P-3) with the
insert nuts facing up. Attach 2 Upper
Inserts (P-4) using 4 Flat Head
screws (A) as shown in illustration # 1.
(Do not tighten the screws all the way).
Part Drawing Description Qty
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight.
If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made by your dealer
using factory authorized parts.
Illustration # 1
P-3
A
P-4

PBL AdjustableHeight
PresentationStandAssemblyDiagram
Note: It is recommended that when attaching stability panels, loosely tighten until all
four screws and thread posts are positioned before fully tightening with Allen Wrench.
Illustration # 2
Attach 2 Stability Panels (P-2)
to 2 Leg Frames (P-1) using 8
Flat Head screws (A) and 8
Interior Threaded Posts (B) as
shown in illustration # 2.
Attach 2 Locking casters (C) in
the front and 2 Casters (D) in
the back. Tighten the Casters
using Caster Wrench (F)]
B
CD
A
A
4.
3.
P-2
P-2
P-1
P-1
P-5
5. Attach Laptop Platform (P-5) to
2 Leg Frames (P-1) using 4 Flat
Head screws (A).

Should you require assistance during assembly,
please call our Customer Service Department
Monday - Friday 8 a.m. - 5 p.m.
Central Standard Time
Toll-Free Customer Service
1-800-749-2258
TheBaltproductyouhavepurchasedisguaranteedagainstmaterial and
workmanshipdefects. Thisguarantee extends 1yearfrom date ofpurchase.
Shouldthisproductfailtofunctionsatisfactorilyundernormal use due to
defectorimperfection, the defectivepartor product willbereplaced. Damage
causedbycommoncarriersduringshipmentisnotincludedinthis guarantee.
This guarantee sets forth all applicable guarantees and remedies.
Noother warranty,expressedor impliedshallapply. Failure tofollow
instructionsfoundinImportant InformationSectionofOwnerSheet
shallvoid the guarantee. Consequentialor incidental damagesand or
costsare not refundable.
Important
Top
Assembly
Illustration # 3
6. Slide the Top Assembly into the
Leg Assembly and secure at
desired height using 2 Knobs
(G) as shown in illustration # 3.
7. Tighten all screws securely using
Allen Wrench (E).
G
Leg
Assembly
G