B&C Speakers 10 PE 26 User manual

8
B&C
High efficiency mid-bass, 2.5” aluminium voice coil,
with very flat response up to 4 kHz.
Specifications
Nominal Diameter 250 mm (10 in.)
Nominal Impedance 8 Ω
Minumum Impedance 6.9 Ω
Power Handling
(60 –600 Hz)
Nominal1250 W
Continuous Program2500 W
Sensitivity (1W/1m) 99 dB
Frequency Range 60-4000 Hz
Voice Coil Diameter 65 mm (2.5 in.)
Winding Material Aluminium
Former Material Glass Fibre
Winding Depth 12 mm (1/2 in.)
Magnetic Gap Depth 8 mm (5/16 in.)
Flux Density 1.25 T
Also available in 16 Ω, data upon request
Thiele Small Parameters4
Fs 60 Hz
Re 5.7 Ω
Qes 0.19
Qms 6.
Qts 0.18
Vas 7 dm. (1. cu. ft.)
Sd 20 cm.2(49.1 sq. in.)
η04.1 %
X max ± 2.4 mm.
Mms 27 gr.
Bl 17.7 Tm
Le 1. mH
Mounting and Shipping Informations
Overall Diameter 260 mm. (10.2 in.)
Bolt Circle Diameter 244 mm. (9.6 in.)
Baffle Cutout Diameter 228 mm. (8.8 in.)
Depth 110 mm. (4. in.)
Flange and Gasket Thickness 17 mm. (2/ in.)
Net Weight 7.1 Kg. (15.6 lb.)
Shipping Weight 7.8 Kg. (17.2 lb.)
Shipping Box 20x 20x160 mm
(12x12x6. in.)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range . Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as dB greater than the Nominal rating.
Applied RMS Voltage is set to 2.8 V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 200 to 4000 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
10 PE 26 |Mid-Bass
Speakers Coaxials HF Compression drivers Horns