B&C Speakers Woofer 15PS40 User manual

Speakers HPL Coaxials HF Compression drivers Horns
Specification
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 Ω
Minumum Impedance 6. Ω
Power Handling
(50 –500 Hz)
Nominal1700 W
Continuous Program21 00 W
Sensitivity (1W/1m)395 dB
Frequency Range 35-2000 Hz
Voice Coil Diameter 100 mm ( in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 21 mm (13/16 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameter 4
Fs 35 Hz
Re 5.3 Ω
Qes 0.33
Qms 8.5
Qts 0.32
Vas 177 dm3(6.2 ft3)
Sd 855 cm2(132.5 in2)
η02.2%
X max ± 6 mm
X var ± 5.5 mm
Mms 120 g
Bl 20. T·m
Le 2. mH
Mounting and Shipping Information
Overall Diameter 39 mm (15.5 in)
Bolt Circle Diameter 37 mm (1 .6 in)
Baffle Cutout Diameter 355 mm (13.9 in)
Depth 168 mm (6.6 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 9.8 kg (21.6 lb)
Shipping Weight 11.1 kg (2 . lb)
Shipping Box 50x 50x200 mm
(17.7x17.7x8 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
Thiele-Small parameters are measured after a high level 20 Hz sine wave precon-
ditioning test.
15 PS 40 |Woofer
Long excursion 15" woofer with 1400W power handling for
subwoofer application. A special 4" voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees a very good LF dynamic range
with a very low distortion figure. Recommended for
compact bass-reflex enclosures.