Banzai Battle Blast STINGRAY 01452 User manual

IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5+
ADULT SET UP IS REQUIRED.
01452
STINGRAYSTINGRAY
Battle BlastBattle Blast
™

IMPORTANT SAFETY INSTRUCTIONS.
PLEASE READ AND SAVE THESE INSTRUCTIONS BEFORE SETUP AND USE.
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
FOR AGES 5+
ADULT SET UP IS REQUIRED.
Part List
1 Inflatable Battle Blast STINGRAY™ x 1
2 Water blaster x 1 3 Repair patch x 1
BANZAI 01452 20121227 1

Safety Information
2 BANZAI 01452 20121227
Warning!
To avoid the risk of serious injury or death;
• This product is intended to be used as a toy and
not as a personal flotation device.
• Do not hang on, stand on or tackle this product.
• Do not use a high pressure pump to inflate.
• Do not use electric air pump if water or moisture is
present. This may result in electric shock.
• Use product in swimming pool only.
• Never drive this product over other swimmers.
• Do not dive underneath this product.
• Disregard and not following the instructions from
manual and warnings could result in injury or
death, especially for children.
• Only for use in water in which the child is within its
depth.
• Do not allow anyone to use this product who
weighs over 100 lbs (45kg).
• All inflatables are temperature sensitive, therefore
never unfold or inflate in temperatures below 50°F.
• Once inflated, make sure that the product does not
come in contact with stones, gravel or other sharp
objects which could puncture the inflatable.
• To prevent premature material fatigue, refrain from
exposing the product to sunlight unnecessarily.
Over sun exposure may cause leakage.
• Do not shoot water blaster cannon directly at
person’s eyes or face.
While every attempt is made to embody the
highest degree of protection in all equipment,
we cannot guarantee freedom from injury. The
user assumes all risk of injury resulting from
use. All merchandise is sold on this condition,
which no representative of the company can
waive or change.
Repair patch instructions
For your convenience, a repair patch has been
included to repair holes in the inflatable section.
Do not use the patch for holes or rips on the seam.
In the event of an accidental puncture, cut out a
suitably sized patch. Make sure you round the
corners of your repair patch to avoid peeling. Make
sure the area to be patched is clean and dry. Press
patch firmly over the puncture. Do not inflate for 20
minutes.

BANZAI 01452 20121227 3
Setup Instructions
1. Placement diagram:
Use in swimming pools
only, not on pavement
or other hard surfaces.
2. Roll out this product.
Inspect for holes, tears
or other damage.
3. Insert the water blaster
into the hole on the top
of this product, before
inflating this product.
4. Inflate this product with
AIR.
NOTE: For easy air
inflation use a manual air
pump designed specifi-
cally for plastic inflatables.
1.
3.
1.
2.
4.

OROR
Setup Instructions
5.
6.
4 BANZAI 01452 20121227
5. BY MOUTH: Remove
the air valve plug and
squeeze the base of
the valve causing the
inner flap to open for
inflation.
BY PUMP: Remove
the air valve plug and
insert air pump nozzle
into the valve. The air
pump nozzle should be
inserted deep enough
to open the inner valve
flap.
Do not over inflate the
item. Once the item is
completely inflated,
then insert the air valve
plug to seal it shut.
NOTE: Fill inflatable with
air until it is firm and solid.
If there is any straining at
the seams, the item is
over inflated. If any seam
begins to strain,
immediately stop inflation
and release air to reduce
the pressure until all signs
of stress on the inflatable
are gone. DO NOT use
the inflatable if there is
straining at the seams.
Use of an over-inflated
item may result in serious
injury, paralysis or death.
Inspect this product for
rips, tears or punctures.
Do not use if damaged.
6. The flexible tubing from
the water blaster
should be inserted into
the hole of each float
so that it submerses in
the water.

BANZAI 01452 20121227 5
Use Instructions
How to play
Get ready for a wet and wild time with the Battle Blast Stingray™!
This pool rider features a built-in hydro pump water blaster for
double the pool-time fun. Enjoy maximum blasting action with an
endless supply of water from the pool. Battle against your friends to
see who can stay on the longest!
NOTE:
1. This is a toy and not a life saving flotation device. It should not be
used as such.
2. Attention! This product should be used in water level no higher
than the neck of a standing child and under adult supervision.
3. There should be a minimum of 6ft (183cm) between the
product rafts and the swimming pool wall to prevent the possibility
of the child falling off and hitting their head on the edge of the
pool’s wall.

1. When this product is
completely dry carefully
deflate it. Remove the
water blaster and
tubing after deflating.
2. When this product is
completely dry,
carefully roll it up and
store in a secure
location away from
children. Do not store it
indoors or in a closed
container until it is
completely dry.
NOTE: Store this
product in a secure
place, away from
children, to prevent
suffocation.
After Use & Storage
6 BANZAI 01452 20121227
2.
1.

PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE.
COLORS AND CONTENTS MAY VARY.
PUTOU INDUSTRIAL AREA,
HUZHEN TOWN, BOLUO,
HUIZHOU, CHINA
ALL RIGHTS RESERVED
MADE IN CHINA
www.toysinquiry.com
DO NOT RETURN TO STORE
THIS PRODUCT CANNOT BE RETURNED
FOR A REFUND AFTER
IT HAS BEEN UNPACKED AND USED.
FOR QUESTIONS OR PROBLEMS WITH THIS PRODUCT
PLEASE EMAIL BELOW ADDRESS
FOR EXPEDITED ASSISTANCE
[e-mail]