Baracoda Manager J2ME User manual

Data Capture
for Workforce
in Motion
BaracodaManager J2ME for
Nokia series 60 phones
Installation Guide
©Baracoda
TM
– March 2009

BM J2ME for Nokia phones – Installation Guide v1.10 - 2 -
Data Capture
for Workforce
in Motion
SUMMARY
SUMMARY................................................................... 2
REVISION HISTORY.......................................................... 3
INTRODUCTION.............................................................. 4
1. BARACODAMANAGER INSTALLATION ........................................ 5

BM J2ME for Nokia phones – Installation Guide v1.10 - 3 -
Data Capture
for Workforce
in Motion
Revision History
hanges to the original manual are listed below.
Document Date Description
1.08 3rd July 08 Initial release
1.09 10th December 08 TagRunners added
1.10 5th March 09 DualRunners added

BM J2ME for Nokia phones – Installation Guide v1.10 - 4 -
Data Capture
for Workforce
in Motion
Introduction
The BaracodaManager J2ME for Nokia phones can be used on all Nokia series 60 models that support
Bluetooth. It is an example application included in the Baracoda Java SDK for Nokia package that shows how to
read data from Baracoda Bluetooth barcode readers. The incoming data will be shown on the main application
window. This document explains how the developer can install the example (and later their own applications)
on the mobile phone.
The Baracoda Java SDK for Nokia can be downloaded from the Partners download section of Baracoda website
(registration is required ):
http://www baracoda com

BM J2ME for Nokia phones – Installation Guide v1.10 - 5 -
Data Capture
for Workforce
in Motion
1. BaracodaManager installation
The Baracoda J2ME SDK for Nokia phones package includes a file named BaracodaManager.jar. The
BaracodaManager is an example application that will need to be copied on the mobile phone. There are two
ways to do that:
-use the synchronization software provided on the phone D
-push the file to the phone by Bluetooth using OBEX. This assumes that the P which will send the file
has a Bluetooth stack software that permits to send files to mobile phones (such as the Widcomm
Bluetooth stack for example).
When the BaracodaManager.jar file has been copied, the user will need to use the phone file manager to find
the file:

BM J2ME for Nokia phones – Installation Guide v1.10 - 6 -
Data Capture
for Workforce
in Motion
Next, the installation procedure must be started on the file:
As soon as this is done, the phone will ask the user if they are sure to want to install the BaracodaManager. The
user should respond “ ontinue” to this question:

BM J2ME for Nokia phones – Installation Guide v1.10 - 7 -
Data Capture
for Workforce
in Motion
Finally, to complete the installation, the user should select “ ontinue” one more time:
Data Capture
for Workforce
in Motion