BARCALOUNGER BRAYLEN 193-913-3SS User manual

USE AND CARE GUIDE
BRAYLEN 3 PIECE SMALL SPACE SET
Model #193-913-3SS
7.30 a.m. - 4.30 p.m. PST, Monday - Friday
1-888-445-6690
[email protected]
Questions, problems, missing parts? Please call Our Customer Service

2
Table of Contents
Safety Information
CAUTION: Use the chairs and table on flat ground only.
Table of Contents........................................................2
Safety Information.......................................................2
Pre-Assembly ............................................................3
Planning Assembly ................................................................3
Hardware Included.................................................................. 3
Package Contents ....................................................................3
Assembly ....................................................................4
DANGER: P ease keep children out of the assembly area
during assembly.
l
...............................................
............................................................
Care and Maintenance 6
7
Warranty .........
Limited

A
3
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 10 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA DD
CCBB
Part Description Quantity
Bolt cap (M6) 12
Bolt (M6X15mm) 12
12
1
Hex wrench
Washer (M6)
AA
DD
CC
BB
PACKAGE CONTENTS
Part Description Quantity
A Seat and back 2
B Chair base 2
#1 Back cushion 2
B
A1
C1
B1
C1
B1
Part Description Quantity
A1 Table top 1
B1 Table leg 2
C1 Table leg 2
#1
#2
#2 Seat cushion 2

4
Assembly
1Assembling the swivel lounge chairs
Place the seat and back (A) upside down on a flat, smooth surface.
Hold the chair base (B) upside down, plug the top of the chair base into the hole on the rectangular plate of the
the chair base until you hear a click.
Turn the chair upright.
Repeat the above procedure for the other chair.
B
A

5
Assembly
2Attaching table legs
C1
C1
A1
B1
B1
Place table top (A1) upside down on a flat, smooth surface.
Attach table legs (B1) and (C1) to the table top with washers (CC) and bolts (BB).
Fully tighten all the bolts (BB) using hex wrench (DD) once all bolts are in place and cover them with bolt caps (AA).
AA
BB
CC
3Turning the table upright
Place cushions (#1) and (#2) on the chairs.
#1
#2
Level the table with foot glides if necessary.