Barco MatrixPRO User manual

www.barco.com
MatrixPRO™
The MatrixPRO series offers four models of wideband matrix switchers for routing analog RGBHV video
signals: 12x4, 12x8, 16x8, and 16x16. All inputs are universal and can accept computer (up to
1600x1200), composite, s-video, component video, HDTV, RGBHV and stereo audio. Each model pro-
vides for switching of RGBHV signals and two channel stereo audio (balanced and unbalanced). Each
input and output is individually isolated and buffered. These inputs can be switched to any one or all
outputs with no crosstalk or signal noise between channels.
Units are rack-mountable, and each unit includes RS-232/485 capability. 12x4 and 12x8 models come
standard with the easy to operate front panel control, which allows for simple input and output selec-
tion directly from the front panel. All units can be connected to a optional Remote Control Interface
that allows for remote input and output selection. An Ethernet port for IP Control is featured on all
units.
The MatrixPRO series also features I/O grouping. This grouping allows the matrix to be divided into
smaller sub-switchers, making installation and control easier. I/O grouping allows specific outputs to
be grouped together - such as those designated for a specific video format. Each units features Vertical
Interval Switching capability to provides glitch-free switches when used with synchronous video
source. RGB delay is used when video is not synchronously locked.
12x4, 12x8, 16x8, 16x16 RGBHVA Matrix switchers
BR MatrixPRO july04.qxd 19-08-2004 15:58 Pagina 2

MP software
Included with each unit is a copy of Folsom’s MP Control Software. A
Windows®-based control program that allows you to configure and control
the matrices for various applications.
DVD Player Camera
NTSC/Pal/SDI HD Player HD CameraBetacam VTR
NTSC/Pal/SDI VCR
VIDEO INPUTS HD INPUTS
HD OUTPUTS
VIDEO OUTPUTS
Betacam VTR
NTSC/PAL
NTSC/Pal
Monitor Video
Projector
Plasma
Display VCR
RS 232-485
Serial Control
Genlock Loop
Through
Genlock In
HD MonitorHD Recorder
MatrixPRO 16x16 connectivity diagram
MatrixPROTM MP Control Software
BR MatrixPRO july04.qxd 19-08-2004 15:58 Pagina 3

Features
• Universal inputs accept computer up to 1600x1200, composite, s-video,
component video, HDTV, RGBHV and stereo audio 350MHz (-3dB), minimum,
ultra-wideband, fully loaded (One input driving all outputs)
• Stereo audio input and output signals balanced or unbalanced
• Volume control on a per input basis
• Mute on a per output basis
• Three switching modes: direct front panel mode for one-touch operation
(12x4 and 12x8 only), MatrixPRO, a Windows®-based software, or an optional
remote control interface for simple operation
• Audio follow or breakaway mode
• Output audio gain and attenuation (-84dB to +15dB)
• IP (Ethernet) control standard
• Front panel lockout mode (12x4 and 12x8 only)
• Memory presets save individual I/O configurations for recall via the front panel
(12x4 and 12x8 only) or RS-232/485
• I/O grouping allows specific outputs to be grouped together making installation
and control easier
• Vertical interval switching capability provides glitch-free switches when
used with synchronous video source. RGB delay is used when video is not
synchronously locked
• MP software a Windows®-based program for simple setup and control is
supplied with each unit
• An additional RS-485 connector is supplied to allow for daisy chaining multiple
matrix switchers or other Folsom devices
• Large LCD display allows for easy navigation and to provide visual verification
of important information about matrix switcher settings
• Fully field programmable to support upgrades
• Backed by a full 3-year parts and labor warranty
MatrixPRO 12 x 8 Matrix Switcher
BR MatrixPRO july04.qxd 19-08-2004 15:58 Pagina 4

VIDEO ROUTING
Gain Unity
Bandwidth 350 MHz (-3dB), fully loaded (one input driving all outputs)
Crosstalk -80dB @ 1 MHz, -65dB @ 10 MHz, -55dB @ 30 MHz, -42dB @ 100 MHz
Switching speed 100 us to 4 seconds (programmable)
VIDEO INPUT
Number/signal type 12, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
composite video
Connectors 12, 16, 32 x 5 are female
Minimum/maximum levels Analog-0.5V to 1.85V p-p with no offset
Impedance 75 ohms
Return loss -30dB @ 5 MHz
Maximum DC offset (Vin=1Vpp) +1.8V, -.6V
VIDEO OUTPUT
Number/signal type 4, 8, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
composite video
Connectors 4, 8, 16 x 5 BNC female
Minimum/maximum level 2V p-p
Impedance 75 ohms
Return loss -30dB @ 5 MHz
DC offset ± 5mV maximum with input at 0 offset
Switching type RGB delay up to 4 seconds
SYNC
Input/output type RGBHV, RGBS, RGsB, RsGsBs
Input level 0.5V to 5.0V p-p, 2.5V p-p normal
Output level AGC to TTL: 4V to 5V p-p
Input/output impedance 75 ohms
Polarity Positive or negative (follows input)
AUDIO ROUTING
Gain -84dB to +15dB
Frequency response 20 Hz to 20 kHz, ±0.05dB THD +
Noise 0.03% @ 1 kHz at rated maximum output drive
S/N >90dB, balanced, at rated maximum output drive (21dBu)
Crosstalk <-80dB @ 1 kHz, fully loaded stereo channel separation >80dB @ 1 kHz
CMRR >75dB @ 20 Hz to 20 kHz
AUDIO INPUT
Number/signal type 8, 12, 16 stereo, balanced/unbalanced
Connectors 8, 12 or 16 3.5 mm captive screw connectors, 5 pole
Impedance 10 kohm balanced or unbalanced, DC coupled
Maximum level +19.5dBu, (balanced or unbalanced) at stated %THD+N
AUDIO OUTPUT
Number/signal type 4, 8, 16 stereo, balanced/unbalanced
Connectors 8, 12, 16 3.5 mm captive screw connectors, 5 pole
Output gain adjustment -84dB to +15dB, adjustable per input by RS-232/485 or front
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) >+15dBm, balanced or unbalanced at stated %THD+N • NOTE: 0dBu = 0.775 volts (RMS)
MatrixPRO specifications
Barco Events
11101 Trade Center Drive, Rancho Cordova, CA 95670 - USA
Tel. +1 916 859-2500 - Fax +1 916 859-2515
Noordlaan 5, 8520 Kuurne - Belgium
Tel. +32 56 36 80 47 - Fax +32 56 36 88 24
email: sales.events@barco.com
Ref.no. R599805 - July 2004
www.barco.com
www.events.barco.com
BR MatrixPRO july04.qxd 19-08-2004 15:58 Pagina 1
Other manuals for MatrixPRO
2
Other Barco Matrix Switcher manuals