Barco ClickShare CSE-800 User manual

ClickShare CSE-800
Installation manual
R5900049/05
19/03/2018

Product revision
Software version: 1.5
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Registered address: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Printed in Belgium

Barco ClickShare Product Specific End User License Agreement1
THIS PRODUCT SPECIFIC USER LICENSE AGREEMENT (EULA) TOGETHER WITH THE BARCO GENERAL EULA ATTACHED
HERETO SET OUT THE TERMS OF USE OF THE SOFTWARE.
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING THE SOFTWARE.
DO NOT ACCEPT THE LICENSE, AND DO NOT INSTALL, DOWNLOAD, ACCESS, OR OTHERWISE COPY OR USE ALL OR ANY
PORTION OF THE SOFTWARE UNLESS YOU CAN AGREE WITH ITS TERMS AS SET OUT IN THIS LICENSE AGREEMENT.
1. Entitlement
Barco ClickShare (the “Software”) offered as a wireless presentation solution that includes the respective software components as further
detailed in the applicable Documentation.
The Software can be used upon purchase from, and subject to payment of the relating purchase price to, a Barco authorized distributor or
reseller of the ClickShare base unit and button or download of the authorized ClickShare applications (each a “Barco ClickShare Product”).
•Term
The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare Product, for as long as you
operate such Barco ClickShare Product.
•Deployment and Use
The Software shall be used solely in association with a Barco ClickShare Product in accordance with the Documentation issued by
Barco for such Product.
2. Support
The Software is subject to the warranty conditions outlined in the Barco warranty rider. Maintenance, including the provision of upgrades
and updates to the Software, and helpdesk support are available at your option on the terms of Barco’s then current warranty rider.
Higher maintenance and support levels can be obtained at the moment of product sale or during the Barco ClickShare Product and/or
Software warranty term.
Higher maintenance and support levels may be included in the initial transaction if ordered and paid for additionally. It is strongly suggested
to maintain the maintenance and support agreement without interruption. Barco reserves the right not to restart maintenance following an
interruption by the customer.
3. Terms of Use
The Software can be used as set out in the Barco EULA attached hereto.
The provisions of this Product Specific EULA override the Barco generic EULA in case of conflicts or inconsistencies.
In case of (inadvertent or other) non-compliance (e.g. where the actual use overshoots the use authorized hereunder), Barco shall have
the option to suspend access to the Software until the non-compliance is remedied, failing of which Barco may terminate the License
Agreement as set out herein.
4. Privacy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely responsible for complying
with all applicable data protection laws and for implementing and maintaining privacy protection and security measures (especially for
components that you provide or control). Barco disclaims any liability in this regard.
Barco created a specific privacy policy for the ClickShare software application for mobile devices, which describes the processing of per-
sonal data via this application (http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app).
5. Other Terms
•Open Source components
The Software contains software components released under an Open Source license.
A list of the third party components used is available in the Software’s README files, through the “My Barco” section of the Barco
website or through other (online) means. The applicable license terms, copyright notices and, as relevant, source code access con-
ditions apply as set out in the Barco EULA attached hereto.
•Retention of data
Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA.
BARCO END USER LICENSE AGREEMENT1
By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the terms of an electronic copy
of this License Agreement), or by installing, downloading, accessing, or otherwise copying or using all or any portion of the Software (as
defined below), (i) you accept this License Agreement on behalf of the entity for which you are authorized to act (e.g., your employer) and
you agree to act in a manner consistent with this License Agreement (or, if there is no such entity for which you are authorized to act, you
1. In the event of any differences or inconsistencies between translations of the EULA and the English text of the EULA, the English text will prevail.

accept this License Agreement on behalf of yourself as an individual and acknowledge that you are legally bound by this Agreement), and
(ii) you represent and warrant that you are duly empowered by the end user in case you act on behalf of such entity.
These terms apply to your use of the Software as of and for the original Term of your license. When you renew or purchase an additional
license, the then current version of this License Agreement shall apply and will remain unchanged during the term of that license and/or
in respect of such changed elements. The other contract documents (Product Specific EULA; Maintenance and Support Agreement, if
and when provided alongside with this document) applies in addition to these terms and constitute the entire License Agreement. You
acknowledge that an electronic copy of this Agreement shall have the same proving value as a hard copy signed by the parties.
If you are unwilling to accept this License Agreement on these terms, or you do not have the right, power and authority to act on behalf
of and bind such entity (or yourself as an individual if there is no such entity), DO NOT SELECT THE “I ACCEPT” BUTTON OR OTH-
ERWISE CLICK ON ANY BUTTON OR OTHER MECHANISM DESIGNED TO ACKNOWLEDGE AGREEMENT, AND DO NOT INSTALL,
DOWNLOAD, ACCESS, OR OTHERWISE COPY OR USE ALL OR ANY PORTION OF THE SOFTWARE.
1. Definitions
“Affiliate” means any corporation or other entity directly or indirectly, controlling, controlled by or under common control with such corpo-
ration or entity. For the purpose of the above, “control” shall mean (i) the ownership or control, directly or indirectly, of fifty percent (50%)
or more of the equity capital or the shares or voting rights in the corporation or other entity in question or (ii) the control of the composition
of the board of directors of the corporation or other entity in question.
“Barco” means Barco NV (company number 0473.191.041) with company address at Beneluxpark 21, 8500 Kortrijk, Belgium, or its des-
ignated Affiliate licensing to you the proprietary software which is the subject matter of this Agreement.
“Documentation” means all technical, reference and installation manuals, user guides, published performance specifications and other
written documentation provided by Barco generally to its licensees with respect to the Software, along with any modifications and updates
thereto;
“DRM” means Barco’s digital rights management platform used to provide access to and access conditions of the Software.
“License Agreement” means this Barco End User License Agreement (EULA), incorporating the terms of the Product Specific EULA, and
any modifications thereof as set out herein.
“Product Specific EULA” means the supplemental software terms applicable
“Software” means the computer software, released in object code only, which is being licensed hereunder, as described in the applicable
purchase order and related Product SpecificEULA.
“Term” means the period set out in article 9.1 hereof, as well as any agreed renewal period.
“you” means the entity on behalf of which these terms are accepted, and any of its representatives having access to the Software.
2. License Grant
2.1 License Scope. Subject to compliance with all license terms and payment of applicable fees, Barco grants you a limited, non-
exclusive, non-assignable, non-transferable, non-sub-licensable license to use the Software exclusively in accordance with the conditions
and parameters set forth herein. Save for the Product Specific EULA or any broader license terms confirmed through the DRM tool, the
license under this License Agreement applies to one (1) copy of the Software to be used on one single computing device by one (1) single
user. Installation on a computing device that may be concurrently accessed by more than one user shall not constitute a permitted use and
a separate license is required for each user connecting at the same time to a computing device on which the Software is being deployed.
2.2 License Type. The applicable license type, and your rights in time, deployment and usage, are further detailed in the Product Specific
EULA (in the absence of which the scope shall be as set in article 2.1 hereof).
2.3 License restrictions.
Intended Use. You agree to use the Software solely as permitted by this License Agreement (and any Product Specific EULA made part
of it), by any applicable laws and in a matter consistent with its design and Documentation.
No Transfer (License Agreement). You agree not to transfer, assign or sublicense your license rights to any other person or entity, unless
Barco’s prior written consent is obtained.
No Transfer (Software). If you deactivate or uninstall the Software from the computer device on which it was originally installed, this will
terminate this License Agreement unless otherwise and specifically approved by Barco. You agree not to use the Software in association
with other hardware or software that allows to pool connections, reroute information or in any other way enables to breach or circumvent
the license restrictions by enabling the deployment and use of the Software by more than the authorized number of devices or users (e.g.
multiplexing) or otherwise attempts to reduce the number of licenses actually required.
Authorized Users. The use of the Software is restricted to persons within your organization, or any third party representatives operating
under your responsibility and control, provided any such persons have accepted the terms of this License Agreement. You agree not to
use or permit the Software to be used to perform services for third parties, whether on a service bureau or time sharing basis or otherwise,
without the prior written authorization of Barco. You shall not lease, rent, sell or otherwise transfer or grant a security or other interest in
the Software.

No Modifications. You shall not make error corrections to or otherwise modify or adapt the Software or create derivative works based upon
the Software, or permit third parties to do the same.
No Reverse Engineering. You agree not to reverse engineer or decompile, decrypt, disassemble or otherwise reduce the Software to
human-readable form, except to the extent otherwise expressly permitted under applicable law notwithstanding this restriction, or except
to the extent Barco is legally required to permit such specific activity pursuant to any applicable open source license.
Code required to ensure interoperability. To the extent required by law, and at your written request, Barco shall provide you with the
interface information needed to achieve interoperability between the Software and another independently created programs used by you,
on payment of Barco’s applicable fee (if any). You shall observe strict obligations of confidentiality with respect to such information and
shall use such information in compliance with terms and conditions which Barco makes applicable.
No Unbundling. The Software may include various applications and components, may support multiple platforms and languages, and may
be provided on multiple media or in multiple copies. Nonetheless, the Software is designed and provided to you as a single product to
be used as a single product on devices as permitted herein. You agree not to unbundle the component parts of the Software for use on
different computer devices.
Territory. You agree to use the Software solely in the territory or region where you obtained the Software from Barco or its authorized reseller
or as otherwise stated in the Documentation. Any export if permitted shall comply with any applicable (export) laws and regulations.
2.4 Your Infrastructure. You remain responsible to procure and maintain hardware, operating system, network and other infrastruc-
ture (the “Infrastructure”) required to operate the Software and to keep such Infrastructure functioning and virus-free. You acknowledge
that the Software is a complex computer software application, and that the performance thereof may vary depending hardware platform,
software interactions and configuration. You acknowledge that the Software is not designed and produced specifically to meet your re-
quirements and expectations and the selection of the Software by you is entirely your own choice and decision.
3. Ownership. Intellectual Property Rights.
3.1 Ownership. Any Software is licensed, not sold to you, on a non-exclusive basis for use only under the terms of this License Agreement,
and Barco and its suppliers reserve all rights not expressly granted to you. You may own the carrier on which the Software is provided, but
the Software is owned and copyrighted by Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of
any rights in the Software or its Documentation.
3.2 Third Party Materials. The Software may contain or require the use of certain third party technology (whether proprietary or
open source software), identified by Barco in the Documentation, readme file, third-party click-accept, on www.barco.com or elsewhere
(the “Identified Components”). Identified Components may be subject to additional and/or different terms and you agree that the Identified
Components are licensed under the terms, disclaimers and warranties of their respective licenses which in the forthcoming case shall
override the provisions of this License Agreement.
3.3 Source Code Access. To the extent required under third party (open source) license terms, and for a period of 36 months following
your acceptance of this License Agreement, Barco shall provide access to the source code controlled by a third party (open source) license,
via email or download link. If the relevant license terms require so, you may require Barco (attn. its legal department, at the address stated
above) to obtain such code on tangible medium against payment of the cost of media, shipping and handling.
3.4 Trademarks / Copyright. Any brand and product names mentioned in relation to the Software may be trademarks, registered
trademarks or copyrights of their respective (third party) holders. In addition, the Software is protected by national and international laws
and treaty provisions. Copyright on the Software components belongs to the respective initial copyright holder, each additional contributor
and/or their respective assignee(s), as may be identified in the Software Documentation, source code, README file, or otherwise. You shall
not remove or obscure or otherwise alter any trademark, copyright or other proprietary notices, legends or logo’s placed on or contained
within the Software.
3.5 Trade Secrets. You acknowledge that the Software embodies valuable trade secrets of Barco and its third party licensors and agree
not to disclose, provide or otherwise make available such trade secrets contained within the Software and Documentation in any form to
any third party without the prior written consent of Barco. You shall implement all reasonable security measures to protect such trade
secrets.
4. Support
4.1 Principle. Barco is under no obligation to provide support and maintenance in respect of the Software, except as included in a
Product Specific EULA and/or to the extent you have entered into a separate maintenance and support agreement and paid applicable
maintenance and support fees. Any unauthorized use of the Software, as specified in any maintenance and support agreement, may
prohibit Barco from providing such support and maintenance.
4.2 Support policy. Maintenance releases updates or upgrades can be obtained under the terms of a separate maintenance and
support agreement which is being offered to you. Such agreements, together with the support included in a Product Specific EULA, include
Barco’s sole liability and your sole remedy in respect of the support and maintenance of the Software. You agree to install any maintenance
releases to address bugs or security issues in the Software if the same are being provided to you. Barco will keep you informed as of when
earlier versions of the Software are no longer serviced.
4.3 Remote connectivity. Barco may require, as a material condition to provide maintenance or support, that the Software remains
remotely connected with Barco over a network.
5. Warranty

EXCEPT FOR THE LIMITED WARRANTY THAT MAY APPLY AS PER THE PRODUCT SPECIFIC EULA, YOU UNDERSTAND THAT
THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS". BARCO DOES NOT MAKE NOR INTENDS TO MAKE ANY WARRANTIES OR
REPRESENTATIONS, EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLECTUAL PROPERTY AND DOES NOT WARRANT
THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT YOU WILL BE ABLE TO OPERATE THE SOFTWARE WITHOUT
INTERRUPTIONS OR THAT SUCH ERRORS WILL BE CORRECTED BY BARCO. EXCEPT FOR ANY MAINTENANCE AND SUPPORT
OBLIGATIONS SEPARATELY AGREED, YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES ASSOCIATED WITH
RECTIFICATION, REPAIR OR DAMAGE CAUSED BY SUCH ERRORS. IN THE FORTHCOMING CASE, THE WARRANTY DISCLAIMER
FOUND IN APPLICABLE OPEN SOURCE LICENSES SHALL OVERRIDE THE PROVISIONS OF THIS LICENSE AGREEMENT.
6. Compliance and Enforcement
6.1 Reporting and Audit. In addition to good practice record-keeping obligations, you agree to report the use of the Software and
relating billing metrics in the DRM or otherwise as agreed. You grant to Barco and its designated auditors, at Barco’s expenses, the right
to verify your deployment and use of the Software during your normal business hours so as to verify your compliance with the License
Agreement. In the event such audit reveals non-compliance with your payment obligations hereunder, you shall promptly pay to Barco the
appropriate license fees plus the reasonable cost of conducting the audit.
6.2 Fair Use Monitor. You are informed and acknowledge that the Software includes technology which allows to remotely decrease
(in part or in full) the functionality of the Software (the “Fair Use Monitor”). Such technology is an enabling tool and a material condition
precedent for Barco to enter into this License Agreement.
6.3 Enforcement. Upon breach of the License Agreement (including overdue payment), Barco shall inform the then known user, through
the DRM or otherwise in writing, (i) which condition of the License Agreement (including payment terms) is violated; (ii) allow a period of
8 calendar days to cure such breach, if it can be cured at all; and (iii) inform which part of the functionality Barco intends to reduce (all
Software or certain additionally licensed features only; in part or in full) if the breach is not remedied on time and in full.
6.4 Remedy. If the breach is not cured within the applicable remedy period (or cannot be cured at all), Barco shall have the option (i) to
cause you to procure such additional licenses required as per the actual usage; (ii) to reduce the Software’s functionality, including through
the use of the Fair Use Monitor; or (iii) to terminate the License Agreement as set out herein, without prejudice to any other remedies
available at law, under contract or in equity.
6.5 Indemnification. YOU HEREBY AGREE TO INDEMNIFY, DEFEND AND HOLD HARMLESS BARCO AND BARCO’S AFFILI-
ATES FROM AND AGAINST ANY AND ALL ACTIONS, PROCEEDINGS, LIABILITY, LOSS, DAMAGES, FEES AND COSTS (INCLUDING
ATTORNEY FEES), AND OTHER EXPENSES INCURRED OR SUFFERED BY BARCO ARISING OUT OF OR IN CONNECTION WITH
ANY BREACH BY YOU OF THE TERMS OF THIS SOFTWARE LICENSE.
7. Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY LAW, BARCO ACCEPTS NO LIABILITY FOR ANY DAMAGES, LOSSES OR CLAIMS YOU
OR ANY THIRD PARTY MAY SUFFER AS A RESULT OF YOUR USE OF THE SOFTWARE. IN JURISIDCTIONS WHERE BARCO’S
LIABILITY CANNOT BE EXCLUDED, BARCO’S LIABILITY FOR DIRECT DAMAGES SHALL BE LIMITED TO THE LICENSE FEES AC-
TUALLY PAID FOR THE SOFTWARE DURING THE TWELVE MONTHS PRECEEDING THE CLAIM (OR AN AMOUNT OF 250 EURO
IF NO FEE WOULD BE PAID) IN THE AGREGATE.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL BARCO BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND WHICH MAY ARISE OUT OF OR IN CONNECTION WITH
THE SOFTWARE, THIS SOFTWARE LICENSE OR THE PERFORMANCE OR PURPORTED PERFORMANCE OF OR FAILURE IN THE
PERFORMANCE OF BARCO’S OBLIGATIONS UNDER THIS SOFTWARE LICENSE OR FOR ANY ECONOMIC LOSS, LOSS OF BUSI-
NESS, CONTRACTS, DATA, GOODWILL, PROFITS, TURNOVER, REVENUE, REPUTATION OR ANY LOSS ARISING FROM WORK
STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OF THE SOFTWARE AND ANY AND ALL OTHER COMMERCIAL DAMAGES
OR LOSSES WHICH MAY ARISE IN RESPECT OF USE OF THE SOFTWARE, EVEN IF BARCO HAS BEEN ADVISED OF THE POS-
SIBILITY OF THEIR OCCURRENCE.
8. Confidentiality
8.1 Confidential Information. You will be receiving information which is proprietary and confidential to Barco during the procure-
ment and Term of this License Agreement. “Confidential Information” shall include (i) the underlying logic, source code and concepts of
the Software or other trade secrets (the access to which is strictly limited as expressly set out herein), (ii) any information designated as
confidential by Barco or which has the necessary quality of confidence about it and (iii) any license key provided by Barco to you hereunder.
8.2 Non-Disclosure. You agree not to divulge any Confidential Information to any persons without Barco’s prior written consent pro-
vided that this article 8 shall not extend to information which was rightfully in your possession prior to the commencement of this License
Agreement, which is already public knowledge or becomes so at a future date (otherwise than as a result of a breach of this article 8), to
the extent it is required to be disclosed by law or which is trivial or obvious. You agree not to use any Confidential Information except for
the authorized purpose hereunder. The foregoing obligations as to confidentiality shall survive the Term of this License Agreement.
9. Term and Termination
9.1 Term. The duration of this License Agreement will be from the date of your acceptance (as set forth above) of the Software (whereby
you acknowledge that use of the Software implies acceptance), until you de-activate the Software, discontinue the use of the device on

which the Software was first installed for its intended use or the expiration of the limited time period set out in the Product SpecificEULA,
whichever comes first.
9.2 Termination. You may terminate this License Agreement at any time by destroying all copies of the Software then in your possession
and destroying all Documentation and associated materials, or returning the same to Barco or the appointed Barco reseller that sold or
provided these to you. Barco may terminate this License Agreement, immediately or gradually in accordance with article 6 hereof, by
informing you at any time if any user is in breach of any of the License Agreement’s terms.
9.3 Consequences of Termination. All rights associated with the use of the Software and the acquisition of updates and upgrades
cease once the License Agreement is terminated or expires. Termination or expiry of your license will not entitle you to any retroactive
refund of current or past payments.
10. Other relevant terms
10.1 Personal Data. Whether or not Barco assumes the role of processor of personal data (as stated in the Product SpecificEULA),you
remain solely responsible for complying with all applicable data protection laws and for implementing and maintaining privacy protection
and security measures (especially for components that you provide or control). Barco disclaims any liability for any data not provided by
Barco, or any use of the Software outside the intended use as per this License Agreement or an applicable data processing annex.
10.2 Functional Information. Via the Software, Barco may gather technical information about (i) the functioning and the function-
ality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software
(“Functional Information”). Barco may make use of such Functional Information for purposes of analytics, for developing and improving
products and services, offering products and services to your organization and/or allowing third parties to access such Functional Informa-
tion; based on the legitimate interest of Barco of evaluating the market, assessing and improving its products and conducting research and
development. All knowhow, inventions and works derived by Barco from the Functional Information will be exclusively owned by Barco.
11. Final Clauses
11.1 Entire Agreement. This License Agreement is the only understanding and agreement between you and Barco for use of the
Software. This License Agreement supersedes all other communications, understandings or agreements we had prior to this License
Agreement (with the exception of any continuing confidentiality agreement).
11.2 Notices. Notices can be validly delivered through the DRM and alternatively or additionally to the parties’ last known address.
11.3 Severability. This License Agreement shall not be altered, amended or varied, except by written agreement signed by its parties.
If any provision of this License Agreement is determined to be illegal, void or unenforceable, or if any court of competent jurisdiction in any
final decision so determines, this License Agreement shall continue in full force save that such provision shall be deemed to be deleted
with effect from the date of such decision, or such earlier date, and shall be replaced by a provision which is acceptable by law and which
embodies the intention of this License Agreement a close as possible.
11.4 Export. You acknowledge that this Software may be subject to U.S. or other governments’ Export control laws and regulations.
You agree to comply with all applicable international and national laws that apply to the Software, including the U.S. Export Administration
Regulations, as well as end-user, end-use, and destination restrictions issued by the U.S. or other governments.
11.5 Survival. The provisions of articles 3, 5, 6, 7, 8, 10 and 11 will survive the termination of this License Agreement, howsoever
caused, but this will not imply or create any continued right to use the Software after termination of this License Agreement.
11.6 Assignment. You are not allowed to assign this Agreement in part or in full to any third party without Barco’s consent. Barco shall
be entitled to assign all or any of Barco’s obligations hereunder to a third party and/or any of Barco’s Affiliates.
11.7 Law and Jurisdiction. The construction, validity and performance of this License Agreement shall be governed in all respects
by the laws of Belgium, without recourse to its conflict of law principles. All disputes arising in any way out of or affecting this License
Agreement shall be subject to the exclusive jurisdiction of the courts of Kortrijk (Belgium), without prejudice to enforcement of any judgment
or order thereof in any other jurisdiction. The United Nations Convention on Contracts for the International Sale of Goods (the "Convention")
shall not apply to this License Agreement, however, if the Convention is deemed by a court of competent jurisdiction to apply to this License
Agreement, Barco shall not be liable for any claimed non-conformance of the Software under Article 35(2) of the Convention.
YOU HEREBY ACKNOWLEDGE TO HAVE READ, UNDERSTOOD AND ACCEPTED TO BE BOUND BY ALL THE TERMS AND CON-
DITIONS OF THIS LICENCE AGREEMENT AS INDICATED ABOVE
Barco ClickShare Product Specific Privacy policy
You are controller for personal data which are being processed via the Software. Therefore, you remain solely responsible for complying with
all applicable data protection laws and for implementing and maintaining privacy protection and security measures (especially for compo-
nents that you provide or control). Barco disclaims any liability in this regard. Barco created a specific privacy policy for the ClickShare soft-
ware application for mobile devices, which describes the processing of personal data via this application (http://www.barco.com/en/about-
barco/legal/privacy-policy/clickshare-app).
Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected
through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”). Barco may make
use of such Functional Information for purposes of analytics, for developing and improving products and services, offering products and
services to your organization and/or allowing third parties to access such Functional Information; based on the legitimate interest of Barco

of evaluating the market, assessing and improving its products and conducting research and development. All knowhow, inventions and
works derived by Barco from the Functional Information will be exclusively owned by Barco.
Open Source Software provisions
This product contains software components released under an Open Source license. A copy of the source code is available on request
by contacting your Barco customer support representative.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE PROVIDED "AS IS"WITH-
OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR
BE LIABLE FOR DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POS-
SIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIA-
BILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE
SOFTWARE. MORE INFORMATION/DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.
Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/or
their respective assignee(s), as may be identified in the respective documentation, source code, README file, or otherwise. You shall not
remove or obscure or otherwise alter the respective copyrights.
You acknowledge living up to the conditions of each separate Open Source Software license.
In the development of the Software, the following Open Source Software components have been used:
giflib http://downloads.sourceforge.net/project/giflib
gnu-efihttp://downloads.sourceforge.net/project/gnu-efi
gnupg2 ftp://ftp.gnupg.org/gcrypt/gnupg
gst1-libav http://gstreamer.freedesktop.org/src/gst-libav
gst1-plugins-bad https://gstreamer.freedesktop.org/src/gst-plugins-bad
gst1-plugins-base https://gstreamer.freedesktop.org/src/gst-plugins-base
gst1-plugins-good https://gstreamer.freedesktop.org/src/gst-plugins-good
gstreamer1 https://gstreamer.freedesktop.org/src/gstreamer
hostapd http://w1.fi/releases
htop http://hisham.hm/htop/releases/2.0.2
i2c-tools git://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git
imxbootlet http://download.ossystems.com.br/bsp/freescale/source
imx-codec http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
imx-gpu-viv http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
imx-lib http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
imx-parser http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
imx-vpu http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
imx-vpuwrap http://www.freescale.com/lgfiles/NMG/MAD/YOCTO
input-event-daemon https://github.com/gandro/input-event-daemon/archive/v0.1.3
iperf http://downloads.sourceforge.net/project/iperf2
iptables http://ftp.netfilter.org/pub/iptables
iw https://cdn.kernel.org/pub/software/network/iw
jpeg-turbo http://downloads.sourceforge.net/project/libjpeg-turbo/1.5.1
json-c https://github.com/json-c/json-c/archive/json-c-0.12-20140410
kmod https://cdn.kernel.org/pub/linux/utils/kernel/kmod
lame http://downloads.sourceforge.net/project/lame/lame/3.100
libarchive http://www.libarchive.org/downloads

libassuan ftp://ftp.gnupg.org/gcrypt/libassuan
libbsd http://libbsd.freedesktop.org/releases
libcap https://www.kernel.org/pub/linux/libs/security/linux-privs/libcap2
libconfig http://www.hyperrealm.com/libconfig
libcurl https://curl.haxx.se/download
libdaemon http://0pointer.de/lennart/projects/libdaemon
libdri2 https://github.com/robclark/libdri2/archive/4f1eef3183df2b270c3d5cbef07343ee5127a6a4
libdrm http://dri.freedesktop.org/libdrm
libedit http://www.thrysoee.dk/editline
libepoxy https://github.com/anholt/libepoxy/archive/v1.3.1
libestr http://libestr.adiscon.com/files/download
libev http://dist.schmorp.de/libev/Attic
libevdev http://www.freedesktop.org/software/libevdev
libevent https://github.com/libevent/libevent/releases/download/release-2.1.8-stable
libfastjson https://github.com/rsyslog/libfastjson/archive/v0.99.4
libffiftp://sourceware.org/pub/libffi
libftdi http://www.intra2net.com/en/developer/libftdi/download
libgcrypt https://gnupg.org/ftp/gcrypt/libgcrypt
libglib2 http://ftp.gnome.org/pub/gnome/sources/glib/2.50
libglu http://cgit.freedesktop.org/mesa/glu/snapshot
libgpg-error ftp://ftp.gnupg.org/gcrypt/libgpg-error
libical https://github.com/libical/libical/releases/download/v1.0.1
libid3tag http://downloads.sourceforge.net/project/mad/libid3tag/0.15.1b
libimxvpuapi https://github.com/Freescale/libimxvpuapi/archive/0.10.3
libinput http://www.freedesktop.org/software/libinput
libjpeg http://www.ijg.org/files
libksba ftp://ftp.gnupg.org/gcrypt/libksba
liblogging http://download.rsyslog.com/liblogging
libmad http://downloads.sourceforge.net/project/mad/libmad/0.15.1b
libmpeg2 http://libmpeg2.sourceforge.net/files
libnl https://github.com/thom311/libnl/releases/download/libnl3_2_27
libogg http://downloads.xiph.org/releases/ogg
libpciaccess http://xorg.freedesktop.org/releases/individual/lib
libpng http://downloads.sourceforge.net/project/libpng/libpng16/1.6.28
libpthread-stubs http://xcb.freedesktop.org/dist
libpthsem http://www.auto.tuwien.ac.at/~mkoegler/pth
libqrencode http://fukuchi.org/works/qrencode
libresample ftp://ftp.ubuntu.com/ubuntu/pool/universe/libr/libresample
libsamplerate http://www.mega-nerd.com/SRC
libselinux https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/releases/20161014
libsepol https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/releases/20161014

libsha1 https://github.com/dottedmag/libsha1/archive/0.3
libsndfile http://www.mega-nerd.com/libsndfile/files
libtool http://ftpmirror.gnu.org/libtool
libusb https://github.com/libusb/libusb/releases/download/v1.0.20
libusb-compat http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/libusb-compat-0.1.5
libv4l http://linuxtv.org/downloads/v4l-utils
libva http://www.freedesktop.org/software/vaapi/releases/libva
libvdpau http://people.freedesktop.org/~aplattner/vdpau
libvorbis http://downloads.xiph.org/releases/vorbis
libxcb http://xcb.freedesktop.org/dist
libxkbcommon http://xkbcommon.org/download
libxml2 ftp://xmlsoft.org/libxml2
libyaml http://pyyaml.org/download/libyaml
lighttpd http://download.lighttpd.net/lighttpd/releases-1.4.x
linux https://www.kernel.org/pub/linux/kernel/v4.x/
linux-firmware http://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
linux-pam http://linux-pam.org/library
lm-sensors http://snapshot.debian.org/archive/debian/20170208T211941Z/pool/main/l/lm-sensors
logrotate https://github.com/logrotate/logrotate/archive/3.11.0
lvm2 ftp://sources.redhat.com/pub/lvm2/releases
memtester http://pyropus.ca/software/memtester/old-versions
mesa3d ftp://ftp.freedesktop.org/pub/mesa/11.2.2
monit http://mmonit.com/monit/dist
mtd ftp://ftp.infradead.org/pub/mtd-utils
mtdev http://bitmath.org/code/mtdev
ncurses http://ftpmirror.gnu.org/ncurses
netcat http://downloads.sourceforge.net/project/netcat/netcat/0.7.1
nodejs https://nodejs.org/dist/
ntp https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2
openssl http://www.openssl.org/source
openssl http://www.openssl.org/source
opkg http://git.yoctoproject.org/git/opkg
opus http://downloads.xiph.org/releases/opus
opus-tools http://downloads.xiph.org/releases/opus
pciutils https://cdn.kernel.org/pub/software/utils/pciutils
pcre https://ftp.pcre.org/pub/pcre
php http://www.php.net/distributions
pixman http://xorg.freedesktop.org/releases/individual/lib
popt http://rpm5.org/files/popt
procps-ng http://downloads.sourceforge.net/project/procps-ng/Production
protobuf https://github.com/google/protobuf/archive/v2.6.1

pulseaudio http://freedesktop.org/software/pulseaudio/releases
python3 http://python.org/ftp/python/3.5.2
python-pyyaml
https://pypi.python.org/pack-
ages/4a/85/db5a2df477072b2902b0eb892feb37d88ac635d36245a72a6a69b23b383a
python-serial
https://pypi.python.org/pack-
ages/ce/9c/694ce79a9d4a164e109aeba1a40fba23336f3b7554978553e22a5d41d54d
qt5base http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5declarative http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5imageformats http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5multimedia http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5quickcontrols http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5serialport http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5svg http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5websockets http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5x11extras http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
qt5xmlpatterns http://download.qt.io/official_releases/qt/5.6/5.6.3/submodules
readline http://ftpmirror.gnu.org/readline
rsync http://rsync.samba.org/ftp/rsync/src
rsyslog http://rsyslog.com/files/download/rsyslog
sazanami-fonts http://sourceforge.jp/projects/efont/downloads/10087
speex http://downloads.us.xiph.org/releases/speex
splashutils http://dev.gentoo.org/~spock/projects/gensplash/archive
sqlite http://www.sqlite.org/2017
strace http://downloads.sourceforge.net/project/strace/strace/4.15
tpm-tools http://downloads.sourceforge.net/project/trousers/tpm-tools/1.3.8
trousers http://downloads.sourceforge.net/project/trousers/trousers/0.3.13
tslib https://github.com/kergoth/tslib/releases/download/1.5
tzdata http://www.iana.org/time-zones/repository/releases
unfonts http://kldp.net/frs/download.php/1425
unzip ftp://ftp.info-zip.org/pub/infozip/src
util-linux https://cdn.kernel.org/pub/linux/utils/util-linux/v2.29
wireless_tools http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux
wireless-regdb http://kernel.org/pub/software/network/wireless-regdb
wpa_supplicant http://w1.fi/releases
xapp_beforelight http://xorg.freedesktop.org/releases/individual/app
xapp_xauth http://xorg.freedesktop.org/releases/individual/app
xapp_xclock http://xorg.freedesktop.org/releases/individual/app
xapp_xinit http://xorg.freedesktop.org/releases/individual/app
xapp_xinput http://xorg.freedesktop.org/releases/individual/app
xapp_xinput-calibrator http://github.com/downloads/tias/xinput_calibrator
xapp_xkbcomp http://xorg.freedesktop.org/releases/individual/app
xapp_xrandr http://xorg.freedesktop.org/releases/individual/app

xcb-proto http://xcb.freedesktop.org/dist
xcb-util http://xcb.freedesktop.org/dist
xcb-util-image http://xcb.freedesktop.org/dist
xcb-util-keysyms http://xcb.freedesktop.org/dist
xcb-util-wm http://xcb.freedesktop.org/dist
xdata_xbitmaps http://xorg.freedesktop.org/releases/individual/data
xdriver_xf86-input-evdev http://xorg.freedesktop.org/releases/individual/driver
xdriver_xf86-video-amdgpu http://xorg.freedesktop.org/releases/individual/driver
xfont_encodings http://xorg.freedesktop.org/releases/individual/font
xfont_font-alias http://xorg.freedesktop.org/releases/individual/font
xfont_font-cursor-misc http://xorg.freedesktop.org/releases/individual/font
xfont_font-misc-misc http://xorg.freedesktop.org/releases/individual/font
xfont_font-util http://xorg.freedesktop.org/releases/individual/font
xkeyboard-config http://www.x.org/releases/individual/data/xkeyboard-config
xlib_libfontenc http://xorg.freedesktop.org/releases/individual/lib
xlib_libICE http://xorg.freedesktop.org/releases/individual/lib
xlib_libSM http://xorg.freedesktop.org/releases/individual/lib
xlib_libX11 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXau http://xorg.freedesktop.org/releases/individual/lib
xlib_libXaw http://xorg.freedesktop.org/releases/individual/lib
xlib_libXcomposite http://xorg.freedesktop.org/releases/individual/lib
xlib_libXcursor http://xorg.freedesktop.org/releases/individual/lib
xlib_libXdamage http://xorg.freedesktop.org/releases/individual/lib
xlib_libXdmcp http://xorg.freedesktop.org/releases/individual/lib
xlib_libXext http://xorg.freedesktop.org/releases/individual/lib
xlib_libXfixes http://xorg.freedesktop.org/releases/individual/lib
xlib_libXfont2 http://xorg.freedesktop.org/releases/individual/lib
xlib_libXft http://xorg.freedesktop.org/releases/individual/lib
xlib_libXi http://xorg.freedesktop.org/releases/individual/lib
xlib_libXinerama http://xorg.freedesktop.org/releases/individual/lib
xlib_libxkbfile http://xorg.freedesktop.org/releases/individual/lib
xlib_libXmu http://xorg.freedesktop.org/releases/individual/lib
xlib_libXpm http://xorg.freedesktop.org/releases/individual/lib
xlib_libXrandr http://xorg.freedesktop.org/releases/individual/lib
xlib_libXrender http://xorg.freedesktop.org/releases/individual/lib
xlib_libXres http://xorg.freedesktop.org/releases/individual/lib
xlib_libXScrnSaver http://xorg.freedesktop.org/releases/individual/lib
xlib_libxshmfence http://xorg.freedesktop.org/releases/individual/lib
xlib_libXt http://xorg.freedesktop.org/releases/individual/lib
xlib_libXv http://xorg.freedesktop.org/releases/individual/lib
xlib_libXxf86vm http://xorg.freedesktop.org/releases/individual/lib

xlib_xtrans http://xorg.freedesktop.org/releases/individual/lib
xproto_bigreqsproto http://xorg.freedesktop.org/releases/individual/proto
xproto_compositeproto http://xorg.freedesktop.org/releases/individual/proto
xproto_damageproto http://xorg.freedesktop.org/releases/individual/proto
xproto_dri2proto http://xorg.freedesktop.org/releases/individual/proto
xproto_dri3proto http://xorg.freedesktop.org/releases/individual/proto
xproto_fixesproto http://xorg.freedesktop.org/releases/individual/proto
xproto_fontsproto http://xorg.freedesktop.org/releases/individual/proto
xproto_glproto http://xorg.freedesktop.org/releases/individual/proto
xproto_inputproto http://xorg.freedesktop.org/releases/individual/proto
xproto_kbproto http://xorg.freedesktop.org/releases/individual/proto
xproto_presentproto http://xorg.freedesktop.org/releases/individual/proto
xproto_randrproto http://xorg.freedesktop.org/releases/individual/proto
xproto_renderproto http://xorg.freedesktop.org/releases/individual/proto
xproto_resourceproto http://xorg.freedesktop.org/releases/individual/proto
xproto_scrnsaverproto http://xorg.freedesktop.org/releases/individual/proto
xproto_videoproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xcmiscproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xextproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xf86bigfontproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xf86dgaproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xf86driproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xf86vidmodeproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xineramaproto http://xorg.freedesktop.org/releases/individual/proto
xproto_xproto http://xorg.freedesktop.org/releases/individual/proto
xserver_xorg-server https://xorg.freedesktop.org/archive/individual/xserver
xterm http://invisible-mirror.net/archives/xterm
xutil_util-macros http://xorg.freedesktop.org/releases/individual/util
zbar https://github.com/ZBar/Zbar/archive/854a5d97059e395807091ac4d80c53f7968abb8f
zip ftp://ftp.info-zip.org/pub/infozip/src
zlib http://www.zlib.net
EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the
following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.

Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You ma y also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV Interference Problems." This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate
this equipment under Federal Communications Commissions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio & television reception.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite
Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band)
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Base Unit FCC ID: 2AAED-R9861580
Button FCC ID (model R9861006D01): XF6-RS9110N1103
Button FCC ID (model R9861500D01): 2AAED-R9861500D01
ClickShare Button R9861500D01 has been tested and meets the FCC RF exposure guidelines.The maximum SAR value reported is
0.915W/kg.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating
in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between
the antenna of this device and all persons.
Base Unit IC ID: IC: 21559-R9861580
Button IC ID (model R9861006D01): 8407A-RS9110N1103
Button IC ID (model R9861500D01): 9393B-R9861500D01

IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 21559-R9861580 has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having
a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Type: Dipole
Maximum Peak Gain: 2 dBi
Impedance: 50 Ohm
Indoor use only warning
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite
systems.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil Barco est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada
(IC). Utilisez l’appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.
Avertissement: L’exposition aux rayonnements fréquences radio
1. Pour se conformer aux exigences de conformité RF canadienne l’exposition, cet appareil et son antenne ne doivent pas être co-lo-
calisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d’au moins 20 cm doit être
maintenue entre l’antenne de cet appareil et toutes les personnes.
IC ID Unité de Base: 21559-R9861580
IC ID Button (modèle R9861006D01): 8407A-RS9110N1103
IC ID Button (modèle R9861500D01): 9393B-R9861500D01
Déclaration d’antenne d’Industrie Canada (IC)
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain
maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Le présent émetteur radio 21559-R9861580 a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés
ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
Type: Dipole
Gain maximum: 2 dBi
Impédance: 50 Ohm
Utilisation à l’intérieur seulement
La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux.

Table of contents
TABLE OF CONTENTS
1. Introduction to the Installation Guide .......................................................................... 3
1.1 Documentation........................................................................................................................ 3
1.2 Symbols and fonts . . .................................................................................................................. 3
2. CSE-800 Specifications ........................................................................................... 5
2.1 About the CSE-800................................................................................................................... 5
2.2 CSE-800 specifications............................................................................................................... 6
2.3 About the Base Unit .................................................................................................................. 7
2.4 About the Button.....................................................................................................................10
2.5 Mobile Device Support ..............................................................................................................12
2.6 Ports used by the ClickShare Base Unit............................................................................................12
3. Getting started.....................................................................................................13
3.1 Environmental Condition Check . . ..................................................................................................13
3.2 Basic Workflow ......................................................................................................................13
4. CSE-800 Installation ..............................................................................................15
4.1 Installation methods for the Base unit ..............................................................................................15
4.2 Table mounting ......................................................................................................................15
4.3 Wall mounting........................................................................................................................15
4.4 Ceiling mounting.....................................................................................................................17
4.5 Rack mounting.......................................................................................................................18
4.6 Recommendations about antenna placement and orientation. ....................................................................19
4.7 Video signal connections to the Base Unit . ........................................................................................19
4.8 Audio connection ....................................................................................................................20
4.9 LAN connection......................................................................................................................21
4.10 Power connection and switching on ................................................................................................21
5. Preparing the buttons ............................................................................................23
5.1 Pairing ...............................................................................................................................23
5.2 ClickShare Extension Pack .........................................................................................................24
5.3 ClickShare Extension Pack installer ................................................................................................24
6. CSE-800 Configurator ............................................................................................27
6.1 Accessing the Configurator .........................................................................................................27
6.2 ClickShare Configuration Wizard ...................................................................................................31
6.3 On-Screen Language and Text Size ................................................................................................33
6.4 Meeting room information ........................................................................................................... 35
6.5 Personalisation, wallpaper . .........................................................................................................36
6.6 Personalisation, Personalized wallpaper . . . ........................................................................................37
6.7 Manage configuration files ..........................................................................................................39
6.8 Display setup, output................................................................................................................40
6.9 Audio settings........................................................................................................................42
6.10 Display setup, Inputs ................................................................................................................43
6.11 WiFi settings.........................................................................................................................43
6.12 LAN Settings.........................................................................................................................45
6.13 Network integration, activation......................................................................................................47
6.14 Network integration, EAP-TLS security mode......................................................................................50
6.15 Network integration, EAP-TTLS security mode . ...................................................................................52
6.16 Network integration, PEAP security mode..........................................................................................54
6.17 Network integration, WPA2-PSK security mode. ...................................................................................55
6.18 Services, mobile devices............................................................................................................56
6.19 Service, ClickShare API, remote control via API ...................................................................................57
6.20 CMGS Server Integration ...........................................................................................................57
6.21 Security, compatibility ...............................................................................................................58
6.22 Security, security level...............................................................................................................59
6.23 Security, passwords ................................................................................................................. 60
6.24 Status information Base Unit........................................................................................................61
6.25 Date & Time setup, manually .......................................................................................................62
6.26 Date & Time setup, time server .....................................................................................................63
6.27 Energy savers .......................................................................................................................64
6.28 Buttons...............................................................................................................................65
6.29 Blackboard . . . ........................................................................................................................65
6.30 Firmware Update ....................................................................................................................70
6.31 Support & Updates, Troubleshoot, log settings. . ...................................................................................70
6.32 Factory defaults......................................................................................................................71
7. Software updates..................................................................................................73
7.1 Software update .....................................................................................................................73
8. Troubleshooting ........ .. ........ .. ........ .. ........ .. ........ .. ........ .. ........ .. ........ .. ........ .. ........ . 75
8.1 Troubleshooting list ..................................................................................................................75
R5900049 CLICKSHARE CSE-800 19/03/2018 1

Table of contents
9. Environmental information ......................................................................................79
9.1 Disposal information.................................................................................................................79
9.2 Rohs compliance ....................................................................................................................79
9.3 Importers contact information .......................................................................................................81
Index......................................................................................................................83
2R5900049 CLICKSHARE CSE-800 19/03/2018

1. Introduction to the Installation Guide
1. INTRODUCTION TO THE INSTALLATION GUIDE
1.1 Documentation
This guide
Partnumber Description Level
R5900049 Installation Guide Installation engineer
This installation guide explains how to install your CSE-800 in a meeting room, It explains also how to make everything operational.
It provides detailed information on how to configure your CSE-800.
Available System documentation
This guide is part of the documentation set describing the CSE-800 product.
Guide Article number
User Guide R5900050
Installation Guide R5900049
Safety Guide R5900047
Service Guide R5900051
Button Guide R5900007
Recycling Manual R5900048
API Guide R5900018
A printed copy of the Safety Guide is included in the CSE-800 box at purchase.
Always check for the latest version of the manual on www.barco.com/clickshare Click on Visit the ClickShare
product page and go to tab Downloads..
1.2 Symbols and fonts
Symbol overview
The following icons are used in the manual :
Caution
Warning
Info, term definition. General info about the term
Note: gives extra information about the described subject
Tip: gives extra advice about the described subject
R5900049 CLICKSHARE CSE-800 19/03/2018 3

1. Introduction to the Installation Guide
Font overview
• Buttons are indicated in bold, e.g. OK.
• Menu items are indicated in italic.
• Step related notes, tips, warnings or cautions are printed in italic.
• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.
4R5900049 CLICKSHARE CSE-800 19/03/2018