Barco Cine VERSUM 80 User manual

HOME CINEMA
ZOOM LENS CINEVERSUM 80
INSTALLATION &ADJUSTMENT MANUAL
03022004 R5976728/00

Barco nv Home Cinema
Noordlaan 5, B-8520 Kuurne
Phone: [phone]
Fax: [phone]
E-mail: [email protected]
Visit us at the web: www.homecinema.barco.com
Printed in Belgium

1. Installation & adjustment procedure
1. INSTALLATION & ADJUSTMENT PROCEDURE
1.1 Used components
Overview
Image 1-1
Image 1-2
Indication Quantity Description
1 1 Top cover
2 1 Bottom cover
A 4 Adjustment bolts
B 4 Lock nuts
C3Lens fixation screws
D 2 Top cover fixation screws
E 4 Bottom fixation screws
1.2 Preparations
Necessary tools
Allen key 3
Step to be taken
1. Take off the lens cap. (image 1-3)
2. Turn on each adjustment screw a lock nut with the rounded side facing the bolt head. (image 1-4)
3. Turn these 4 adjustment bolts into the lens adaptor until the top of the bolt equals the front of the lens adaptor. The head of the
bolt must face the projector. (image 1-5)
R5976728 ZOOM LENS CINEVERSUM 80 03022004 1

1. Installation & adjustment procedure
Image 1-3
Lens protection cover
Image 1-4
Adjustment bolts
Image 1-5
Adjustment bolts mounted
1.3 Mounting the lens
Necessary tools
Allen key 3
How to mount
1. Insert the lens into the lens adapter.
2. Insert the 3 lock screws from lens to adaptor and turn in a few turns to secure the lens. (image 1-6)
2R5976728 ZOOM LENS CINEVERSUM 80 03022004

1. Installation & adjustment procedure
Image 1-6
Secure the lens
1.4 Adjusting the lens
Necessary tools
Allen key 3
How to adjust
1. Turn the focus ring completely to the left and mark that position.
2. Turn the focus ring completely to the right and mark that position.
3. Turn the focus ring to the mid position between the left and right mark.
4. Switch on the projector and select a test pattern.
5. Adjust the 4 adjustment bolts until you reaches the sharpest image (Allen key 3). (image 1-7)
6. Tighten the 3 lock screws to secure the lens into the adapter (Allen key 3). (image 1-8)
7. Turn the nuts on the adjustment bolts until it join the back side of the adaptor (Wrench 6)
8. Fine tune the focus of the image with the focus ring of the lens.
Image 1-7
Adjust Adjustment bolts Image 1-8
Tighten lens
R5976728 ZOOM LENS CINEVERSUM 80 03022004 3

1. Installation & adjustment procedure
1.5 Mounting the lens protection covers
Necessary tools
• Torx screwdriver 10
• Torx screwdriver 7
How to mount
1. Mount first the bottom cover and secure with the 4 screws (Torx screwdriver 10) (image 1-9)
2. Put the top cover over the lens. Insert the pin of the plastic cover into the hole of the lens adaptor. (image 1-10)
3. Tighten both cover pieces to each other with the 2 screws inserted from the bottom side. (image 1-11)
Lens is mounted. (image 1-12)
Image 1-9
Bottom view , mount lens cover Image 1-10
Mounting hole top cover
Image 1-11
Tight both pieces together
Image 1-12
Mounting completed
4R5976728 ZOOM LENS CINEVERSUM 80 03022004