Barco OverView cDG67-DL User manual

Installation manual
OVERVIEW CDG67-DL
R5976624

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 _________________________________________________________________ iii
R5976624 Current Version
Title: OVERVIEW CDG67-DL– Installation Manual
ID-no.: R597662
Revision: 02
Date: October 200
main issue update
chapter 1
chapter 2
chapter 3
chapter 4 Proper grounding, cable fixation to profile
chapter 5
chapter 6
chapter 7
chapter 8
chapter 9
new: The corresponding chapters are new or completely revised.
corr.: Passages of the corresponding chapter were corrected; see modification bars.
add.: Passages of the corresponding chapter were added; see modification bars.
Document History
Modifications, which result in a new version, are indicated by a vertical bar.

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 _________________________________________________________________ iv
Trademarks
Brand and product names mentioned in this manual might be trademarks, registered trademarks or copyrights of
their respective holders. All brand and product names mentioned in this manual serve as comments or examples
and are not to be understood as advertising for the products or their manufacturers.
Copyright © 2 4 by BARCO
Die Weitergabe sowie die Vervielfältigung aller Unterlagen, die von uns überlassen werden, deren Verwertung
und Mitteilung ihres Inhaltes an Dritte ist nicht gestattet, soweit dies nicht ausdrücklich zugestanden ist.
Urheberrechte, insbesondere auch solche an Software, werden nur insoweit übertragen, als es für die Erreichung
des speziellen Vertragszwecks erforderlich ist. Zuwiderhandlungen können zu Schadensersatz verpflichten. Alle
Rechte aus der Erteilung eines Patents oder der Eintragung eines Gebrauchsmusters verbleiben bei uns.
Copyright © 2 4 by BARCO
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be
recorded, transmitted or stored in a retrieval system without the prior written consent of BARCO.
Guarantee and Compensation
BARCO provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of
guarantee. On receipt, the purchaser must immediately inspect all delivered goods for damage incurred during
transport, as well as for material and manufacturing faults. BARCO must be informed immediately in writing of
any complaints.
The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on
the date of commissioning, at the latest 30 days after the transfer of risks. In the event of justified notice of
complaint, BARCO can repair the fault or provide a replacement at its own discretion within an appropriate
period. If this measure proves to be impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract (redhibition). All other claims, in particular those relating to
compensation for direct or indirect damage, and also damage attributed to the operation of software as well as
to other services provided by BARCO, being a component of the system or independent services, will be deemed
invalid provided the damage is not proven to be attributed to the absence of properties guaranteed in writing or
due to the intent or gross negligence on the part of BARCO.
If the purchaser or a third party carries out modifications or repairs on good delivered by BARCO, or if the goods
are handled incorrectly, in particular if the systems are commissioned or operated incorrectly or if, after the
transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the
purchaser will be rendered invalid. Not included in the guarantee coverage are system failures which are
attributed to programs or special electronic circuitry provided by the purchaser, e. g. interfaces. Normal wear as
well as normal maintenance are not subject to the guarantee provided by BARCO either.
The environmental conditions as well as the servicing and maintenance regulations specified in this manual must
be complied with by the customer.

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 __________________________________________________________________ v
Revision sheet
To:
•BARCO Control Rooms Gm H
An der Rossweid 5, D-76229 Karlsruhe
Phone: + 9-721-6201-0, Fax: + 9-721-6201-298
E-mail: [e-mail], Web: www.barcocontrolrooms.com
From:
Date:
Please correct the following points in this documentation (R597662 ):
page wrong correct

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 _________________________________________________________________ vi
Contents
1 Introduction........................................................................................................................................ 1-1
1.1 Styles and Symbols .....................................................................................................................................1-2
1.2 Safety Instruction.........................................................................................................................................1-3
1.2.1 Standards ............................................................................................................................................1-3
1.2.2 General safety instructions.................................................................................................................1-3
1.2.3 Installation ..........................................................................................................................................1-3
1.2. Placement ...........................................................................................................................................1-
1.2.5 Operation ............................................................................................................................................1-
1.2.6 Servicing..............................................................................................................................................1-5
1.2.7 Unpacking of devices..........................................................................................................................1-5
1.2.8 Modification of devices ......................................................................................................................1-5
1.2.9 Cleaning instructions screens and mirrors.........................................................................................1-6
2 Pre-Installation re uirements ........................................................................................................... 2-1
2.1 Power and grounding..................................................................................................................................2-1
2.2 Environmental conditions ...........................................................................................................................2-1
2.2.1 General conditions..............................................................................................................................2-1
2.3 Floor requirements......................................................................................................................................2-2
2. Luminance ...................................................................................................................................................2-2
2.5 Access...........................................................................................................................................................2-3
2.6 Installation and room requirements...........................................................................................................2-3
2.7 Footprint.......................................................................................................................................................2-3
2.8 Overall dimensions......................................................................................................................................2-
2.9 Maintenance area........................................................................................................................................2-5
2.10 Built-in configuration ................................................................................................................................2-6
3 Mechanical setup ............................................................................................................................... 3-1
3.1 Tools needed for installation ......................................................................................................................3-1
3.2 Preassemblies..............................................................................................................................................3-2
3.3 Assembling the structure ............................................................................................................................3-5
3. Stitching the screens ...................................................................................................................................3-8
3.5 Installing the mirrors................................................................................................................................ 3-11
3.6 Grounding the structure and fixation of the structure to the floor........................................................ 3-15
3.7 Installing the engine ................................................................................................................................ 3-18
3.8 Cabling of the engine............................................................................................................................... 3-21

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 _________________________________________________________________ vii
4 Taking into operation ......................................................................................................................4-22
.1 Running the fans ...................................................................................................................................... -22
.2 Inserting the Lamp Modules .................................................................................................................... -22
.3 Selecting the correct lamp driver ............................................................................................................ -2
5 Geometric adjustment....................................................................................................................... 5-1
5.1 Adjustment Overview .................................................................................................................................5-1
5.2 The projection lens for SXGA+ systems ......................................................................................................5-3
5.3 The projection lens for XGA systems ..........................................................................................................5-
5. Strictly prohibited devices...........................................................................................................................5-5
5.5 Adjustment devices.....................................................................................................................................5-6
5.6 First steps.....................................................................................................................................................5-7
5.7 Focus adjustment ........................................................................................................................................5-7
5.8 Picture size...................................................................................................................................................5-8
5.9 Vertical Trapezoid ........................................................................................................................................5-9
5.10 Horizontal trapezoid ............................................................................................................................... 5-10
5.11 Rotation .................................................................................................................................................. 5-11
5.12 Horizontal picture shift........................................................................................................................... 5-12
5.13 Vertical picture shift ............................................................................................................................... 5-13
5.1 Locking the Projection Unit.................................................................................................................... 5-13
5.15 Installing the shielding..............................................................................................................................5-1
5.16 Installing the standard and design trim ...................................................................................................5-3
6 Final Adjustment and Configuration ................................................................................................. 6-1
6.1 Data cables ..................................................................................................................................................6-1
6.2 The IR Remote-Control Unit ........................................................................................................................6-1
6.2.1 Terminology of RCU controls ..............................................................................................................6-2
6.3 General.........................................................................................................................................................6-3
6. Menu Layout................................................................................................................................................6-3
6. .1 Navigating...........................................................................................................................................6-3
6.5 Activating the Menu Bar .............................................................................................................................6-3
6.5.1 Reset Runtime ....................................................................................................................................6-3
6.5.2 Lamp Optimization .............................................................................................................................6-
6.6 Access to the service menu ........................................................................................................................6-6
6.6.1 Projector Address................................................................................................................................6-7
6.6.2 RS232 baudrate ..................................................................................................................................6-9
6.6.3 Internal patterns .............................................................................................................................. 6-10
6.6. Color/Brightness.............................................................................................................................. 6-12

Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 ________________________________________________________________ viii
6.6.5 Orientation ....................................................................................................................................... 6-26
6.6.6 Maintenance .................................................................................................................................... 6-27
6.6.7 No Source Counter........................................................................................................................... 6-32
6.6.8 I2C Diagnostics................................................................................................................................. 6-33
6.6.9 Dimmer Sensor Power..................................................................................................................... 6-3
6.6.10 Save................................................................................................................................................ 6-35
6.6.11 Freeze............................................................................................................................................. 6-36
6.6.12 Disable IR ....................................................................................................................................... 6-37
6.6.13 Lamps............................................................................................................................................. 6-38
6.6.1 Version ........................................................................................................................................... 6- 2
6.6.15 More............................................................................................................................................... 6- 3
7 Manual User Interface........................................................................................................................ 7-1
7.1 Power Switch...............................................................................................................................................7-1
7.2 Standby Switch............................................................................................................................................7-2
7.3 Active Lamp Selection Switch.....................................................................................................................7-3
7. Indication of Power LED ..............................................................................................................................7-
7.5 Indication of Lamp Door LED.......................................................................................................................7-
7.6 Indication of the Status LEDs.......................................................................................................................7-5
8 Hot Line .............................................................................................................................................. 8-1
8.1 Address ........................................................................................................................................................8-1

1
11
1. Introduction
IntroductionIntroduction
Introduction
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 ________________________________________________________________ 1-1
1Introduction
This chapter explains the used typographic styles and symbols. Safety information is provided concerning the
operation of control room solutions from BARCO.

1
11
1. Introdu
IntroduIntrodu
Introduction
ctionction
ction
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 ________________________________________________________________ 1-2
1.1 Styles and Symbols
The typographic styles and the symbols used in this document have the following meaning:
Bold Labels, menus and buttons are printed in Bold font.
Condensed Links to both other chapters of this manual and to sites in the Internet are printed
condensed. In the on-line version of this manual all hyperlinks appear teal.
Courier Names of files and parts from programs are printed in the Courier font.
Courier bold Inputs you are supposed to do from the keyboard are printed in Courier bold font.
If you do not heed instructions indicated y this sym ol there is a risk of damage to the
equipment!
If you do not heed instructions indicated y this sym ol there is a risk of electrical shock
and danger to personal health!
If you do not heed instructions indicated y this sym ol there is a risk of damage to parts,
which are sensitive towared electrostatic charge!
If you do not heed instructions indicated y this sym ol there is a risk to get harmed y
sharp o jects!
If you do not heed instructions indicated y this sym ol there is a risk that parts may
explode!
If you do not heed instructions indicated y this sym ol there is a risk that hot parts impact
persons or o jects!
The sheet icon indicates additional notes.
Next to this icon you find further information.
This arrow marks tips.
Next to this icon you find important notes.

1
11
1. Introduction
IntroductionIntroduction
Introduction
Barco – OverView cDG67-DL – R5976624– installation manual – Revision 0 – August-2005 ________________________________________________________________ 1-
1.2 Safety Instruction
This section describes safety precautions, which must be observed when installing and operating a product from
BARCO.
1.2.1 Standards
Safety Regulations
The equipment is built in accordance with the requirements of the international safety standard IEC950, UL1950
and CSA C22.2 No. 950, which are the safety standards of information technology equipment including electrical
business equipment.
The safety standards of information technology equipment impose important requirements on the use of safety
critical components, materials and isolation, in order to protect the user or operator against the risk of electric
shock and energy hazard, and having access to live parts.
Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical
stability and strength, enclosure construction and protection against risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the use even when the
equipment’s normal operation fails.
1.2.2 General safety instructions
•All the safety and operating instructions should be read before using this unit.
•The operating instruction manual should be retained for future reference.
•All warnings on the device and in the documentation manuals should be adhered to.
•All instructions for operating and use of this equipment must be followed precisely.
1.2.3 Installation
Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO
service dealers.
1.2.3.1 Power Connection
This product should be operated from an AC power source. Power input is auto ranging from 100V to 2 0V.
Check the power rating on your outlet efore connecting the devices to the wall outlet or
to a power strip. Contact your facilities manager or a qualified electrician if you are not
sure what type of power is supplied to your uilding.
All equipment in the system is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the
grounding-type plug.
The devices are designed to operate with single-phase power systems having a grounded
neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of
power system.
Use only the power cord supplied with your device. While appearing to be similar, other power cords have not
been safety tested at the factory and may not be used to power the projector. For a replacement power cord,
contact your dealer.