Barco ULTRA REALITY 7000 User manual

The new standard in reliability, maintainability, and performance
GenesisTM Series raster/calligraphic projectors
Barco’s GENESIS™ Series provide the
ultimate in digital, high-performance
raster/calligraphic projection The
GENESIS™ Series uses Barco’s proprietary
design and delivers a level of
performance and dependability
unmatched by any other system 2x
increase in pixel count translates into
increased calligraphic performance in
day/night/dusk/NVG modes Feature-
for-feature, the GENESIS™ Series projectors
offer outstanding value and performance
for a broad range of Level C and Level D
full-flight simulation applications
Barco Genesis™ Advantages
The GENESIS™Series projectors offer many advantages not found in other types of CRT
projectors:
•All digital calligraphic interface
•Superior image definition
•2x increase in lightpoint drawing capacity
•Calligraphic performance with dynamic range far exceeds any other projection
technology
•Dynamic multi-level, four-sided edge blending
•Extreme distortion capability with superior geometry alignment performance results in
highest picture quality with no pixel loss
•Interlace and non-interlaced operation with frame extension
•Liquid- or air-coupled lens compatibility
•Industry-standard, 9-inch projection CRTs
•CE/UL compliant
•Advanced architecture offers unparalleled image stability
•Lens focus adjustment and Scheimpflug adjustment for optimum focus
•Enhanced diagnostics for remote monitoring and support
•Simplified alignment requiring less training and support
•Exceeds all full-flight, motion-based requirements
•1-year warranty

www.simulation.barco.com
Barco Simulation
US Headquarters:
600 Bellbrook Avenue - Xenia, OH 453 5-4053
Tel. [phone] • Fax [phone]
email: [e-mail]
European Headquarters:
Noordlaan 5, B 520 Kuurne - Belgium
Tel. [phone] • Fax [phone]
email: [e-mail]
March 2005
Barco Simulation is an ISO 9001 registered company.
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice.
The latest version of this product sheet can be found on www.simulation.barco.com.
G
ENESIS and xRACU are trademarks of Barco.
DESIGNED UNDER
ISO
AutoAli n™
This proven, revolutionary system enables you to quickly and easily setup and
maintain a multiple projector system with minimal user intervention Advanced
technology allows you to perform repeatable and accurate alignments that exceed
typical human performance standards Barco's AUTOALIGN system provides an
automated approach to efficiently perform routine alignment tasks, resulting in
rapid channel and display system alignment
Experienced, Reliable Worldwide Support
Barco is committed to providing world-class, worldwide service and support
including after-sales technical support, product and application training, and
documentation services Our customer support specialists provide professional,
accurate, and timely responses 7 days a week, 24 hours a day, every day of the
year All systems are backed by a 1-year warranty
For assistance in evaluating your visual display needs, please visit us on the
web or call our sales office.
Desi ned for Lower Cost of Ownership
Simulation systems demand the highest reliability and ease of maintenance
GENESISSeries projectors offer unrivaled efficiency through a fully focused digital
architecture They are designed with a minimum number of LRUs (line replaceable
units) for easy maintenance Modular unit design allows you to exchange
components or perform repairs quickly to minimize downtime and increase uptime
Universal Compatibility
GENESISSeries projectors seamlessly integrate with any available raster/calligraphic or
raster image generator Projectors can be configured to optimize the visual system
performance and packaging constraints
Remote Ali nment and Control
GENESISSeries projectors are equipped with a user-friendly control interface for setup
and maintenance
•Alignment data can be stored and easily recalled
•Diagnostics provide simulator visual system alert functionality
•Unit can be used as a remote interface to other IG systems
•Full control via Ethernet
AutoAlign
The RACU features a user-
friendly, full-color, touch-screen
display. On-screen menus guide the
operator through the alignment process.