Barco ClickShare CSE-800 User manual

ClickShare CSE-800
User guide
R5900050/01
15/03/2017

Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Registered address: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: [phone]
Fax: [phone]
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Printed in China

Barco ClickShare End-User License Agreement (EULA/Software License)
PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING SOFTWARE OR HARDWARE
PROVIDED TO YOU BY BARCO AS IT CONTAINS THE TERMS AND CONDITIONS BY WHICH BARCO OFFERS TO LICENSE THE
SOFTWARE. BY OPENING THE SOFTWARE PACKAGE, OR USING THE HARDWARE IN WHICH THE SOFTWARE IS EMBEDDED,
YOU AGREE TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT.
The Software as supplied by BARCO is licensed, not sold to you, on a non-exclusive basis for use only under the terms of this license,
and BARCO reserve all rights not expressly granted to you. You may own the carrier on which the Software is provided, but the Software
is owned and copyrighted by BARCO or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights
in the Software or its documentation.
By installing, executing and/or using the Software, either as initial version or as an upgrade, update, patch or enhancement of a prior
release, this Software License shall supersede any terms and conditions previously agreed upon (whether or not in writing) between Barco
and you with respect to the subject matter of this Software License and such previous terms shall from the date hereof cease to have any
force or effect; provided, however that this Software License shall not be construed as a renunciation, discharge or waiver of any right or
remedy provided in any terms and conditions previously agreed upon with respect to a failure of either party to perform any of its obligations
under any terms and conditions previously agreed upon.
Software Specifications
The Software contains the following software products: ClickShare (base unit, button and client software).
Software License Terms
1. This Software License is between you and BARCO NV, a corporation organized and existing under the laws of Belgium registered
under number BE 0473.191.041, Commercial Companies’ Register of Kortrijk, having its registered office President Kennedypark, 35
at B-8500 Kortrijk, Belgium ("Barco") for the use of the Software.
You hereby undertake to inform all Authorized Users of the terms of this Software License and to bind all Authorized Users to accept all
such terms of this Software License as applies to them. Barco grants you a limited, non-exclusive, non-assignable, non-transferable
license (without the right to grant sublicenses).
2. The Software component parts must not be separated, replicated or reverse engineered in any manner. You and Authorized Users
are entitled to use the Software for the purposes and in the manner set out in this EULA (and documentation), but neither you nor
any Authorized User are entitled to: (i) sell or grant a security interest in the Software to other parties in any way, or to rent, lease or
sub-license the Software to others without the express prior written consent of Barco; or (ii) exploit the Software or any of its component
parts for any commercial purpose, other than use by you and/or Authorized Users of the Software.
3. Barco shall hold you harmless and indemnify you from and against direct damages, losses and expenses arising from infringement
or alleged infringement of any patent, trademark or copyright of such third party by the license and the right to install the Software as
permitted by this Software License and defend and settle at its sole expense any claim, action, suit or proceeding brought against you,
provided that (i) you promptly notify Barco in writing after a claim has been asserted against you or the commencement of any claim,
action, suit or proceeding, and (ii) Barco shall assume sole control of the defense and any settlement negotiations related to any claim,
action, suit or proceeding, and (iii) you shall not negotiate, settle or compromise any claim, action, suit or proceeding without the prior
written consent of Barco and (iv) you, at your cost, shall cooperate with Barco and provide assistance and support, as may reasonably
required by Barco, in connection with the defense and any settlement negotiations related to any claim, action, suit or proceeding.
Barco shall have no indemnity obligation for any Software, or any portion thereof, (i) that is based on specifications, drawings, models
or other data furnished by you or, (ii) that is not provided by Barco or, (iii) that is modified, in spite of the prohibition for you to modify
the software or, (iv) to the extent that you continue allegedly infringing activity after having been provided modifications that avoid the
alleged infringement, or (v) where the use of the Software, or the combination or thereof with other Software, processes or materials or
the distribution thereof rather than the Software itself is the primary cause of an alleged infringement. In case it has been determined
by a finally awarded judgment that Barco infringed or misappropriated such third party rights or earlier, at Barco’s discretion, it may, at
its option and cost, (i) modify the Software in such a way that it shall not infringe upon or misappropriate the rights of the third party or
(ii) obtain for you a license or other right to use the rights allegedly infringed or (iii) replace the Software in question with non-infringing
Software. The remedies set forth in this paragraph shall constitute your sole and exclusive remedy and Barco’s sole and exclusive
liability for a third party claim that the Product infringes or misappropriates any intellectual property right of a third party.
4. Barco (and Barco’s licensors, as appropriate) retain ownership of all intellectual property rights in the Software and any copies you or
any Authorized User may make of such Software. The Software is protected by national copyright laws, international copyright treaties
and conventions, and other applicable laws. All rights not expressly licensed to you in this Software License are reserved to Barco
and Barco’s licensors, as appropriate. The Software contains certain other licensed materials and Barco’s licensors may protect their
rights in the event of any violation of this Software License. Neither you nor any Authorized User may, whether in whole or in part,
copy, translate, reverse engineer, derive source code from, modify, disassemble, decompile, create derivative works based on the
Software, or remove any proprietary notices or labels on the Software, save as may be permitted by law or this Software License,
without the prior consent, in writing, of Barco.
5. The duration of this Software License will be from the date of your acceptance (as set forth above) of the Software (whereby you ac-
knowledge that use of the Software implies acceptance), with no termination date, unless otherwise specified. You may terminate this
Software License at any time by destroying all copies of the Software then in your possession and returning all associated materials
and documentation, to Barco or the appointed Barco reseller that sold or provided these to you. Barco may terminate this Software
License forthwith by informing you at any time if you and/or any Authorized User are in breach of any of the Software License’s terms.

6. YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS". BARCO DOES NOT MAKE NOR INTENDS
TO MAKE ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ALL IMPLIED
WARRANTIES OF MERCHANTABILITY FITNESS, FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLEC-
TUAL PROPERTY AND DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT SUCH ERRORS
WILL BE CORRECTED BY BARCO AND YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES ASSOCIATED
WITH RECTIFICATION, REPAIR OR DAMAGE CAUSED BY SUCH ERRORS.
YOU ALSO ACKNOWLEDGE AND AGREE THAT:
BARCO ACCEPTS NO LIABILITY FOR ANY DAMAGES, LOSSES OR CLAIMS YOU OR ANY THIRD PARTY MAY SUFFER AS A
RESULT OF YOUR USE OF THE SOFTWARE, AND YOU HEREBY AGREE TO INDEMNIFY, KEEP INDEMNIFIED, DEFEND AND
HOLD HARMLESS BARCO AND BARCO"S AFFILIATES AND SUBSIDIARIES FROM AND AGAINST ANY AND ALL ACTIONS,
PROCEEDINGS, LIABILITY, LOSS, DAMAGES, FEES AND COSTS (INCLUDING ATTORNEYS" FEES), AND OTHER EXPENSES
INCURRED OR SUFFERED BY BARCO ARISING OUT OF OR IN CONNECTION WITH ANY BREACH BY YOU OF THE TERMS OF
THIS SOFTWARE LICENSE. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL BARCO BE LIABLE FOR ANY
INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND WHICH MAY ARISE
OUT OF OR IN CONNECTION WITH THE SOFTWARE, THIS SOFTWARE LICENSE OR THE PERFORMANCE OR PURPORTED
PERFORMANCE OF OR FAILURE IN THE PERFORMANCE OF BARCO"S OBLIGATIONS UNDER THIS SOFTWARE LICENSE
OR FOR ANY ECONOMIC LOSS, LOSS OF BUSINESS, CONTRACTS, DATA, GOODWILL, PROFITS, TURNOVER, REVENUE,
REPUTATION OR ANY LOSS ARISING FROM WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OF THE SOFT-
WARE AND ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES WHICH MAY ARISE IN RESPECT OF USE OF THE
SOFTWARE, EVEN IF BARCO HAS BEEN ADVISED OF THE POSSIBILITY OF THEIR OCCURRENCE; AND
7. You shall treat as confidential all information obtained from the other pursuant to this Software License which is marked "confidential"
or the equivalent or has the necessary quality of confidence about it and shall not divulge such information to any persons without
Barco’s prior written consent provided that this Paragraph 7 shall not extend to information which was rightfully in the possession of
you prior to the commencement of the negotiations leading to this Software License, which is already public knowledge or becomes
so at a future date (otherwise than as a result of a breach of this paragraph 7), is required to be disclosed by law or which is trivial or
obvious. You are aware of and ensure to comply with the provisions of this paragraph 7. The foregoing obligations as to confidentiality
shall survive any termination of this Software License.
8. You agree with and fully accept the following limited service and support statements.
You will remain responsible for the maintenance of your hardware, operating system, the functioning of your network and in keeping
your systems virus-free. You acknowledge that the Software is a complex computer software application, and that the performance
thereof may vary depending hardware platform, software interactions and configuration. You acknowledge that the Software is not
designed and produced specifically to meet your specific requirements and expectations and the selection of the Software by you is
entirely your own choice and decision.
9. This Software License is the only understanding and agreement between you and Barco for use of the Software by you and/or Autho-
rized Users. The Software License supersedes all other communications, understandings or agreements we had prior to this Software
License (with the exception of any continuing confidentiality agreement) although nothing in this Software License purports to exclude
liability for fraudulent misrepresentation. You may not export or re-export the Software or any copy or adaptation in violation of any
applicable laws or regulations. This Software License shall not be altered, amended or varied. If any provision of this Software Li-
cense is determined to be illegal, void or unenforceable, or if any court of competent jurisdiction in any final decision so determines,
this Software License shall continue in full force save that such provision shall be deemed to be deleted with effect from the date of
such decision, or such earlier date.
10. You acknowledge that this Software may be subject to U.S. or other governments Export Jurisdiction. You agree to comply with all
applicable international and national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as
end-user, end-use, and destination restrictions issued by the U.S. or other governments.
11. Barco shall be entitled to sub-contract all or any of Barco’s obligations hereunder to a third party and/or any of Barco’s affiliated
companies.
12. The construction, validity and performance of this Software License shall be governed in all respects by the laws of Belgium without
recourse to its conflict of law principles. All disputes arising in any way out of or affecting this Software License shall be subject
to the exclusive jurisdiction of the courts of Kortrijk, without prejudice to enforcement of any judgment or order thereof in any other
jurisdiction.
13. The United Nations Convention on Contracts for the International Sale of Goods (the "Convention") shall not apply to this Software
License, however, if the Convention is deemed by a court of competent jurisdiction to apply to this Software License, Barco shall not
be liable for any claimed non-conformance of the Software under Article 35(2) of the Convention.
Trademarks Software License Terms
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.
All third party brand and product names mentioned in the product collaterals serve as comments or examples (including in respect of
compatibility) and are not to be understood as endorsements by their respective owner for Barco or the Barco products.
Functional Information Data
You understand that the Software is fitted with a connected functionality to Barco, and that Barco may be gathering (automatically or through
a manual process) technical information about:

• The identity of the product in question (such as but not limited to MAC ID, OS version, Software version, ...)
• Details about the connection to Barco (such as but not limited to the first connection, last connection, # of attempts, IP address of the
device, ...)
• The functionality of the products which are connected through the Software, and/or
• As otherwise provided by you.
(hereafter referred to as “Functional Information”).
You acknowledge and agree that Barco may make use of such Functional Information for any reason Barco sees fit, including but not
limited to analytics, providing services to your organization, allowing third party to access to such Functional Information and/or to provide
services to your organization.
Functional Data shall only relate to technical aspects of the product in question. Functional Data shall under no circumstance contain
any data relating to an identified or, directly or indirectly, identifiable natural person (including pseudononymised data). (“Personal Data”).
Barco does not control, collect or processes any Personal Data through the Functional Data. Barco consequently is not to be considered
a data controller or data processors under applicable legislation.
Privacy Policy
You hereby explicitly give consent that Barco may gather, access, preserve, and/or disclose Personal data as provided by you (e.g. con-
nected with your account allowing for the gathering of Functional Information as well as any content associated with that account):
• For the benefit of the business purposes of Barco and/or its affiliates;
• For administration of the relationship between you, your organization and Barco and/or its affiliates ;
• For any other legitimate purpose (including i) direct marketing purposes from Barco, its affiliates or selected third parties, and ii)
allowing third parties to provide services to you related to the Software);
• if required to do so by law or in a good faith belief that such access preservation or disclosure is reasonably necessary to:
- Satisfy any applicable law, regulation, legal process or enforceable governmental request;
- Enforce this Software License, including investigation of potential violations hereof;
- Detect, prevent, or otherwise address fraud, security or technical issues (including, without limitation, the filtering of spam);
- Protect against imminent harm to the rights, property or safety of Barco, its users or the public as required or permitted by law.
Barco shall not process any “sensitive information” whatsoever, including but not limited to medical information.
You understand that the technical processing and transmission of or by the Software, including your content, may involve:
• Transmissions over various networks;
• Changes to conform and adapt to technical requirements of connecting networks, devices and/or services.
You hereby explicitly give consent that Barco may export your personal data to any country worldwide, especially to any country where
Barco and/or its affiliates have infrastructure, or where a third party is making available infrastructure to Barco and/or its affiliates, to process
personal data.
Barco fully adheres to the EU Directive 95/46/EC on the protection of individuals with regard to the processing of personal data and the
free movement of such data, as implemented in the local EU member states. In accordance with these regulations, you have a right of
access to, and rectification of, your personal data. You may exercise these rights by contacting Barco.
Open Source Software provisions:
This product contains software components released under an Open Source license. A copy of the source code is available on request
by contacting your Barco customer support representative.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE PROVIDED "AS IS" WITH-
OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR
BE LIABLE FOR DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POS-
SIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIA-
BILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCE
SOFTWARE. MORE INFORMATION/DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.
Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/or
their respective assignee(s), as may be identified in the respective documentation, source code, README file, or otherwise. You shall not
remove or obscure or otherwise alter the respective copyrights.
You acknowledge living up to the conditions of each separate Open Source Software license.
In the development of the Software, the following Open Source Software components have been used:

alsa-lib http://www.gnu.org/licenses/gpl.html
alsa-utils http://www.gnu.org/licenses/gpl.html
busybox http://opensource.org/licenses/GPL-2.0
dropbear http://opensource.org/licenses/mit-license.php
fakeroot http://www.gnu.org/licenses/gpl.html
linux http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
gmp http://www.gnu.org/licenses/lgpl.html
iproute2 http://www.gnu.org/licenses/gpl.html
kobs-ng http://www.gnu.org/licenses/gpl.html
rsync (<3.0.0) http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
rsync (>=3.0.0) http://www.gnu.org/licenses/gpl.html
uClibc http://www.gnu.org/licenses/lgpl.html
wireless_tools http://www.gnu.org/licenses/gpl.html
wpa_supplicant http://opensource.org/licenses/BSD-3-Clause
imx-bootlets http://www.gnu.org/licenses/gpl.html
Crypto++ http://www.cryptopp.com/License.txt
libresample http://www.gnu.org/licenses/lgpl.html
libjpeg-turbo http://opensource.org/licenses/BSD-3-Clause
acpid http://www.gnu.org/licenses/gpl.html
avahi http://www.gnu.org/licenses/lgpl.html
crda http://opensource.org/licenses/ISC
cron http://opensource.org/licenses/ISC
dbus http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
dhcpd http://opensource.org/licenses/ISC
dmidecode http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
e2fsprogs http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
eglibc http://www.gnu.org/licenses/lgpl.html
ethtool http://www.gnu.org/licenses/gpl.html
gdbserver http://www.gnu.org/licenses/gpl.html
grub http://www.gnu.org/licenses/gpl.html
gstreamer http://www.gnu.org/licenses/gpl.html
hdparm http://opensource.org/licenses/BSD-3-Clause
hostapd http://opensource.org/licenses/BSD-3-Clause
i2c-tools http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

iftop http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
iperf http://opensource.org/licenses/BSD-3-Clause
iptables http://opensource.org/licenses/BSD-3-Clause
iw http://opensource.org/licenses/BSD-3-Clause
acl http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
attr http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
libcap2 http://www.gnu.org/licenses/gpl.html
libdaemon0 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
libdrm2 http://opensource.org/licenses/MIT
libexpat1 http://opensource.org/licenses/MIT
libfontconfig1 http://opensource.org/licenses/BSD-3-Clause
libfontenc1 http://opensource.org/licenses/BSD-3-Clause
freetype http://freetype.sourceforge.net/FTL.TXT
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
libgcc1 http://www.gnu.org/licenses/gpl.html
libgcrypt11 http://www.gnu.org/licenses/gpl.html
http://www.gnu.org/licenses/lgpl.html
http://www.gnu.org/copyleft/fdl.html
libglib-2 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
libgnutls26 http://www.gnu.org/licenses/lgpl.html
libgpg-error0 http://www.gnu.org/licenses/gpl.html
http://www.gnu.org/licenses/lgpl.html
http://www.gnu.org/copyleft/fdl.html
libjpeg8 BSD like licensee
libnl2 http://www.gnu.org/licenses/lgpl.html
libnss-mdns http://www.gnu.org/licenses/gpl.html
libpam http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
libpcap http://opensource.org/licenses/BSD-3-Clause
libpcre0 http://opensource.org/licenses/BSD-3-Clause
libpixman-1-0 http://changelogs.ubuntu.com/changelogs/pool/main/p/pix-
man/pixman_0.10.0-0ubuntu1/libpixman-1-0.copyright
libpng12-0 http://www.libpng.org/pub/png/src/libpng-LICENSE.txt
libpopt0 http://opensource.org/licenses/MIT
libsm6
libstdc++6 http://www.gnu.org/licenses/gpl.html
libtalloc2 http://www.gnu.org/licenses/lgpl.html

libusb http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
libxml2 http://opensource.org/licenses/MIT
libz1 Free license
lighttpd http://opensource.org/licenses/BSD-3-Clause
lmsensors http://www.gnu.org/licenses/gpl.html
logrotate http://www.gnu.org/licenses/gpl.html
makedevs http://www.gnu.org/licenses/gpl.html
memtest86plus http://www.gnu.org/licenses/gpl.html
mesa http://opensource.org/licenses/MIT
module-init-tools http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
modutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
monit http://www.gnu.org/licenses/gpl.html
ncurses http://opensource.org/licenses/MIT
netbase http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
openssh-sftp-server http://opensource.org/licenses/BSD-3-Clause
openssl http://www.openssl.org/source/license.html
opkg http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
pciutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
perl http://perldoc.perl.org/perlartistic.html
http://www.gnu.org/licenses/old-licenses/gpl-1.0.html
php http://www.php.net/license/3_01.txt
procps http://www.gnu.org/licenses/gpl.html
read-edid Free license
rgb
rockbox-imxtools http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
rsyslog http://www.gnu.org/licenses/gpl.html
splashutils http://www.gnu.org/licenses/gpl.html
strace http://opensource.org/licenses/BSD-3-Clause
sysfsutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
sysvinit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
tcpdump http://opensource.org/licenses/BSD-3-Clause
ttf-arphic-uming
ttf-dejavu-common
ttf-dejavu-sans-mono

ttf-dejavu-sans
ttf-sazanami-gothic
ttf-sazanami-mincho
ttf-un-fonts
udev http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
update-modules http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
update-rc http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
usbutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
util-linux-ng http://www.gnu.org/licenses/gpl.html
xserver-xorg http://opensource.org/licenses/MIT
zeroconf http://www.gnu.org/licenses/gpl.html
EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to
take adequate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the
following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You ma y also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV Interference Problems." This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate
this equipment under Federal Communications Commissions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio & television reception.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite
Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band)
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Base Unit FCC ID: 2AAED-R9861580
Button FCC ID (model R9861006D01): XF6-RS9110N1103
Button FCC ID (model R9861500D01): 2AAED-R9861500D01
ClickShare Button R9861500D01 has been tested and meets the FCC RF exposure guidelines.The maximum SAR value reported is
0.915W/kg.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating
in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between
the antenna of this device and all persons.
Base Unit IC ID: IC: 21559-R9861580
Button IC ID (model R9861006D01): 8407A-RS9110N1103
Button IC ID (model R9861500D01): 9393B-R9861500D01
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 21559-R9861580 has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having
a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Type: Dipole
Maximum Peak Gain: 2 dBi
Impedance: 50 Ohm
Indoor use only warning
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite
systems.
Canada, avis d’lndustry Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Informations concernant l’exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil Barco est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada
(IC). Utilisez l’appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.
Avertissement: L’exposition aux rayonnements fréquences radio

1. Pour se conformer aux exigences de conformité RF canadienne l’exposition, cet appareil et son antenne ne doivent pas être co-lo-
calisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur.
2. Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d’au moins 20 cm doit être
maintenue entre l’antenne de cet appareil et toutes les personnes.
IC ID Unité de Base: 21559-R9861580
IC ID Button (modèle R9861006D01): 8407A-RS9110N1103
IC ID Button (modèle R9861500D01): 9393B-R9861500D01
Déclaration d’antenne d’Industrie Canada (IC)
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain
maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique
à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Le présent émetteur radio 21559-R9861580 a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés
ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.
Type: Dipole
Gain maximum: 2 dBi
Impédance: 50 Ohm
Utilisation à l’intérieur seulement
La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable
aux systèmes de satellites mobiles utilisant les mêmes canaux.

Table of contents
TABLE OF CONTENTS
1. Introduction ......................................................................................................... 3
1.1 Versions of the product ............................................................................................................... 3
1.2 About this guide ...................................................................................................................... 3
1.3 Symbols and fonts . . .................................................................................................................. 4
2. Introduction to CSE-800........................................................................................... 5
2.1 About the CSE-800................................................................................................................... 5
2.2 About the Base Unit .................................................................................................................. 6
2.3 About the Button...................................................................................................................... 9
2.4 Mobile Device Support .............................................................................................................. 11
3. Getting started.....................................................................................................13
3.1 Activating the Base Unit............................................................................................................. 13
3.2 Basic Use............................................................................................................................14
3.3 Advanced Use ....................................................................................................................... 15
3.4 User Interface........................................................................................................................17
3.5 Capture more........................................................................................................................ 18
3.6 Shared desktop: primary - extended................................................................................................18
3.7 Moderation . . . ........................................................................................................................ 20
3.8 Audio configuration..................................................................................................................23
3.9 Pairing ...............................................................................................................................25
4. Troubleshooting ...... .. .... .... .... ...... ...... ...... ...... ...... ...... .. .... . . .... .... ...... ...... ...... ...... ...27
4.1 Basic Troubleshooting ...............................................................................................................27
5. Environmental information ......................................................................................29
5.1 Disposal information................................................................................................................. 29
5.2 Rohs compliance ....................................................................................................................29
5.3 Production address . .................................................................................................................30
5.4 Importers contact information ....................................................................................................... 31
Index......................................................................................................................33
R5900050 CLICKSHARE CSE-800 15/03/2017 1

Table of contents
2R5900050 CLICKSHARE CSE-800 15/03/2017

1. Introduction
1. INTRODUCTION
Overview
• Versions of the product
• About this guide
• Symbols and fonts
1.1 Versions of the product
Regional versions
Depending on the location where you buy the CSE-800 product, the Base Unit and accessories are regionalized. By the time of
release of this manual, 3 regional versions of CSE-800 are available:
• Europe & Japan
• North America
• China
The regional version of your CSE-800 cannot be changed. That means that you cannot use it in another region.
For more information on the regional variants, refer to the CSE-800 Installation Guide.
1.2 About this guide
This manual
Partnumber Description Level
R5900050 User Guide User
Available System documentation
This guide is part of the documentation set describing the CSE-800 product.
Guide Article number
User Guide R5900050
Installation Guide R5900049
Safety Guide R5900047
Service Guide R5900051
Button Guide R5900007
Recycling Manual R5900048
API Guide R5900018
A printed copy of the Safety Guide is included in the CSE-800 box at purchase.
Always check for the latest version of the manual on www.barco.com/clickshare Click on Visit the ClickShare
product page and go to tab Downloads..
Depending on the CSE-800 version, some graphics might be different to the ones used in this manual. This
however does not have any effect to the functionality.
R5900050 CLICKSHARE CSE-800 15/03/2017 3

1. Introduction
The User Guide describes how to use your CSE-800. It also contains a basic troubleshooting part where you can search for a
solution when a problem occurs.
1.3 Symbols and fonts
Symbol overview
The following icons are used in the manual :
Caution
Warning
Info, term definition. General info about the term
Note: gives extra information about the described subject
Tip: gives extra advice about the described subject
Font overview
• Buttons are indicated in bold, e.g. OK.
• Menu items are indicated in italic.
• Step related notes, tips, warnings or cautions are printed in italic.
• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.
4R5900050 CLICKSHARE CSE-800 15/03/2017

2. Introduction to CSE-800
2. INTRODUCTION TO CSE-800
Overview
• About the CSE-800
• About the Base Unit
• About the Button
• Mobile Device Support
2.1 About the CSE-800
CSE-800 sets
CSE-800 makes connecting to the meeting room’s video system a matter of clicking a Button. This CSE-800 not only helps the
presenter get the presentation on-screen in a second, but it also allows the other people in the meeting to participate more actively.
The result is enhanced meeting efficiency and better decision-making.
At the moment 3 different sets are available on the market. Each set is sold in its specific region and it can only be used in that
specific region because of WiFi regulations.
Components CSE-800 set
A standard CSE-800 set consists of a Base Unit, 4 Buttons and a Tray. Depending on the location where you buy the product, the
software of the Base Unit is different. If needed, you can buy additional Buttons and Trays.
2
1
3
Image 2-1
Accessories included
Depending on the country where you buy the product, the following regionalized accessories are also included in the CSE-800 box.
Regional version Contains Accessories included
R9861580EU
• R9861580EU
• 4x R9861500D01
• R9861500T01
• power cables CEE7 and BS 1363
• wall/ceiling mounting brackets
• antenna extension cables
R5900050 CLICKSHARE CSE-800 15/03/2017 5

2. Introduction to CSE-800
Regional version Contains Accessories included
R9861580CN
• R9861580CN
• 4x R9861500D01
• R9861500T01
• power cable GB 2099
• wall/ceiling mounting brackets
• antenna extension cables
R9861580NA
• R9861580NA
• 4x R9861500D01
• R9861500T01
• power cable NEMA 5/15
• wall/ceiling mounting brackets
• antenna extension cables
Contact your local sales representative for the correct regional variant to be used in your country.
2.2 About the Base Unit
Base Unit
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and
the sound of the meeting room’s audio system.
The Base Unit can be installed in two different ways.
Front and Top layout of the Base Unit
At the front of the Base Unit you can find a standby button and two USB ports. Status LED is mounted at the left of the standby
button.
1
2
Image 2-2
1 2x USB port 3.0
2 Standby button
Tabl e 2 -2
USB ports
The USB ports (front or back) are used to update the soft- and firmware of both the Base Unit and the Buttons. To pair the buttons,
connect the touchscreen and saving blackboarding/annotation screen to USB stick1.
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the Button’s
software and firmware are up to date. If not, the Base Unit updates the software and/or firmware.
1. touchscreen connection, blackboarding/annotation screen saving will be available in future releases
6R5900050 CLICKSHARE CSE-800 15/03/2017

2. Introduction to CSE-800
To update the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick
and plug it into the USB port of the Base Unit. Follow the progress and instructions on the display.
Status LED
The color of the LED at the front of the Base Unit give information on the status of the system.
LEDs behavior Explanation
static red
• receiving content from the Buttons and streaming towards the display.
• pairing and software update of the Button is done. You can now unplug the
Button from the Base Unit.
• during the first phase of the Base Unit boot process.
blinking white
• system is starting up (during the second phase)
• Button pairing is in progress
• software update of the Base Unit
breathing white
• ECO standby mode
static white
• awake and ready (i.e. showing the welcome message on the display)
• pairing is done
red blinking
• an error occurred
dark
• deep standby/off
Standby button
The button at the front of the Base Unit has a standby function once the Base unit is powered
• When the system is in normal operational mode, a push makes the system goes to a pre-defined standby mode.
• When the system is in a standby mode, a push triggers the system to start up and to go to normal operational mode.
Back layout of the Base Unit
The connection panel is situated at the back of the Base unit.
1
23a
4
6
53b
7
9
8
10
11 12 13 3b 14
15
3a
Image 2-3
1Rockerswitch
2 Power connection
3a Fixture point for antenna WiFi 1
R5900050 CLICKSHARE CSE-800 15/03/2017 7

2. Introduction to CSE-800
3b Fixture point for antenna WiFi 2
4 Reset
5HDMI out 1 connector
6 HDMI out 2 connector
7LAN 1 connector (primary LAN interface)
8LAN 2 connector (secondary LAN interface)
9 USB connectors 3.0
10 USB connectors 2.0
11 Audio connectors
12 Audio connectors
13 HDMI in 1 connector
14 HDMI in 2 connector
15 Kensington lock
Rocker switch
The rocker switch is used to power on and off the Base Unit.
• ToswitchontheBaseUnit,settherockerswitchto“I”.
• To shut down the system, set the rocker switch to “0”.
Mechanical fixture points
The mechanical fixture points are located at the bottom of the Base Unit
Antenna
Four antennas are included in the CSE-800 box for concurrent dual band WiFi. To avoid damage during transport, they are not
pre-mounted.
The antennas can rotate for a better wireless connection.
Usage of antennas other than the ones provided with the unit are allowed within the restrictions on usage of other antennas defined
by local regulations. Barco does not take responsibility for damage or disturbance of other devices that may be caused by using a
different antenna. The use of an active power amplifier is not allowed.
Antenna type : Dipole
Gain : Maximum 2 dBi peak gain in 2.4GHz and 5Ghz band
Ventilation grids
Ventilation grids are foreseen on the front side and on the back sides of the Base Unit.
8R5900050 CLICKSHARE CSE-800 15/03/2017