Bartscher ECO 700L GN210 User manual

ECO 700L GN210
700820
Original-Gebrauchsanleitung
V1/1217

- 23 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 24
1.1 Key to symbols..................................................................................................... 24
1.2 Safety instructions................................................................................................ 25
1.3 Proper use............................................................................................................ 28
2. General information................................................................................................ 29
2.1 Liability and Warrantees....................................................................................... 29
2.2 Copyright protection ............................................................................................. 29
2.3 Declaration of conformity...................................................................................... 29
3. Transport, package, storage.................................................................................. 30
3.1 Delivery check...................................................................................................... 30
3.2 Packaging............................................................................................................. 30
3.3 Storage................................................................................................................. 30
4. Technical data ......................................................................................................... 31
4.1 Overview of parts ................................................................................................. 31
4.2 Technical specification ......................................................................................... 32
5. Installation and operation....................................................................................... 33
5.1 Installation............................................................................................................ 33
5.2 Control panel elements......................................................................................... 35
5.3 Control panel functions......................................................................................... 36
5.4 Tips for the user ................................................................................................... 38
6. Cleaning and maintenance..................................................................................... 39
7. Possible Malfunctions ............................................................................................ 41
8. Error messages....................................................................................................... 42
9. Discarding old devices........................................................................................... 44
Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com
GB/UK

- 24 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.

- 25 -
FIRE HAZARD / FLAMMABLE MATERIALS HAZARD / EXPLOSION
HAZARD!
This symbol highlights potentially dangerous situations which could lead to
injury or death.
CAUTION!
This symbol highlights dangerous situations which could lead to light injuries,
or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
The device is not intended for use by individuals (including
children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.
Children should be observed to ensure that they are not playing
with or starting the device.
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
Keep the key to the control cabinet away from the reach of
children.
The device is for indoor use only.

- 26 -
The device must be operated in correct and safe technical
condition only. In case of operational problems disconnect the
device from the power supply (pull the plug from the socket)
and contact the service company.
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions
below.
Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.
The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.
Do not cover the cable. Keep away the cable from operating
range and do not immerse it into water.
Check the power cord regularly for damage. Do not use the
device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.

- 27 -
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.
FIRE HAZARD / FLAMMABLE MATERIALS HAZARD /
EXPLOSION HAZARD!
Incorrect operation of the device may cause fire or explosion hazard
due to ignition of its content.
To avoid the hazard please follow the safety instructions below:
Do not use any electric devices in the device.
Never use any flammable liquids for cleaning the device or its
parts. Gases releasing during above activities may cause fire
or explosion hazard.
Do not store or use petrol or other flammable liquids and
gases in the vicinity of this or any other device. Those gases
may cause fire or explosion hazard.

- 28 -
Do not put any explosive materials, like sprays filled with
flammable propellants, into the device.
The cooling system in the device may be damaged.
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The refrigerator is designed only for cooling and storing of relevant beverages
and food.
The refrigerator may not be used for:
-storing of flammable or explosive materials or fluids, like ether,
alcohol, kerosene, or glues;
-storing of pharmaceutical products or preserved blood.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 29 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 30 -
3. Transport, package, storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
Durante la recuperación del embalaje hay que cumplir los
reglamentos vigentes del país dado. Los materiales de empaque con
propiedades de reúso hay que reciclarlos.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-Do not store outdoors.
-Keep it dry and dust-free.
-Do not expose it to aggressive media.
-Do not expose it to direct sunlight.
-Avoid mechanical shocks and vibration.
-In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.

- 31 -
4. Technical data
4.1 Overview of parts
1
Electronics module
6
Pre-formed bearing rails
2
Digital temperature controller
7
Height-adjustable feet (4x)
3
Electronics module lock
8
Grid (3x)
4
Door
9
Housing
5
Door seal
10
LED lighting
7
5
4
9
8
1
6
3
2
10

- 32 -
4.2 Technical specification
Name
Refrigerator ECO 700L GN210
Code-No.:
700820
Material:
inside and outside: stainless steel
Realization:
Insulation: Polyurethane foam, 87.5 mm
Number of doors: 1, Type of door: leaf
right side, door hinge side cannot be changed
Cooling: Circulating air
Thermostat
Automatic defrost function
Drip water evaporation
Control: electronic
LED lighting
Digital display
ON/OFF switch
Lockable
Height-adjustable feet (4x)
Control light: on/off, ready, temperature, fan,
compressor, defrost, condenser filter cleaning
Capacity:
700 litres
Shelves:
Type: grille, plastic-coated
Number 3
Gastronorm size: 2/1 GN, Size: W 530 x D 650 mm
Height-adjustable
Pre-formed bearing rails
Temperature control:
Electronic in 0.1°C steps
Temperature range:
- 2 °C to 8 °C
Coolant:
R134a
Climate class:
5
Ambient temperature:
10 °C to 40 °C
Energy efficiency class:
A
Energy consumption:
337 kWh/year
Power:
0.12 kW / 230 V 50 Hz
Dimensions:
W 700 x D 830 x H 2020 mm
Weight:
130 kg
We reserve the right to implement the technical modifications!

- 33 -
5. Installation and operation
5.1 Installation
CAUTION!
The installation and connection of the device should be made only by qualified
specialist establishment.
To avoid personal injury or damage to the device, we recommend two people
unpack and install the device.
Location
Unpack the device and remove and dispose of all package materials according to
the environmental protection regulations.
Leave the device on the palete.
Move the device only by lifting up (e.g. using a fork lift) to avoid damage to feet or
other accessories.
You can remove the palete when the device is placed in the installation location.
Pay attention not to hit the device.
Place the device on a sturdy, dry, flat and water and heat-resistant surface that will
suppor the weight of the fully loaded device.
Never place the device on a flammable surface.
You must not position the device near open fire, electric furnaces, heaters or other
heat sources such as direct sunlight. Hight temperature may damage the surface of
the device as well as impair cooling performance and increase energy consumption.
To avoid damage to the compressor, do not tilt the device more than 45° during
transport and installation.
Place the device so that sufficient air circulation is ensured. Leave a 10 cm clearance
before walls and other objects.
Do not place the device in places of high air humidity. Excessive humidity may
damage the device. The device reaches its optimal operational conditions at an
ambient temperature from 10 °C to 40 °C and relative air humidity from 40% in the
installation place.
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
Adjust the device using height-adjustable feet. Use a level, if needed. All feet must
stand on the floor. Only in this way the correct door opening and closing may be
ensured.

- 34 -
Before the first use, remove the protective foil from the device. Remove the foil slowly
not to leave glue residues. Remove possible glue residues with appropriate solvent.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Electric connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate).
Connect the device only in case of compliance!
Before first connection to the electric power supply, the device should be left for at
least 2 hours to let the refrigerant circulation calm down and avoid any malfunctions.
If the device was not stored or transported in a vertical position, it should stand in a
vertical position for about 12 hours before start-up.
In case of loss of power supply or when the plug has been pulled out of the socket,
do not connect the device to electric power supply for at least 5 minutes.
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device only directly to a single grounded socket, do not use any splitters
or multisockets.

- 35 -
5.2 Control panel elements
1
Main switch
2
Main switch control light
3
“SET” function key
4
Telethermostat ON/OFF key
ON /OFF control light
5
Temperature decrease button
6
Manual defrost button
7
Temperature increase button
8
LED light, ready
9
Digital telethermostat
2
3
8
9
6
1
5
4
6
7

- 36 -
5.3 Control panel functions
Device switch on / off
Connect the device to a single grounded socket.
Switch the device on with the main switch on the control panel The green
on/ff control light at the main switch comes on.
Thermostat switch on / off
Press and hold the button for a few seconds. LED light starts flashing and
the device switches on. LED light is on when the device is on and is off then the
devices switches off.
Press the button and hold for 3 seconds to turn the device off. LED light
flashes and then the device switches off.
Operating temperature setting
When the device is operating the digital display shows the temperature in the
cooling area.
The user may set the - 2 °C to 8 °C temperature
When you press the button the digital display shows the set
temperature. LED light flashes.
The digital display shows the temperature for 5 seconds. During that time you can
increase or decrease the temperature using the button and .
Press the button to confirm the setting.
Defrosting
The digital telethermostat automatically
controls the evaporator defrosting.
The defrosting process is indicated
by a relevant LED light.
In this phase you must not place in or
remove anything from the refrigerator.
A relevant probe controls the end of the defrosting process. In particularly difficult
operating conditions (high temperature and humidity in the room or when high
moisture release products are added) a few additional defrosting processes should
be performed manually. To do so, press and hold the button for a few seconds.

- 37 -
Button lock / unlock
Keypad lock:
1. Make sure no procedure is in progress.
2. Do not key in anything for 30 seconds; the display shows “Loc” message
for 1 second and the keypad will be locked automatically.
To unblock the keypad:
1. Press and hold the button for 1 second: the display shows “UnL” message
for 1 second.
LED light indications
This LED light shows the status
(on or off) of the COMPRESSOR
This LED light shows that defrosting
is in progress
This LED light shows the status
(on or off) of the BLOWER
When this LED light is on, it is
necessary to clean the condenser fliter

- 38 -
5.4 Tips for the user
Placing items for cooling
To ensure that the device is correctly operated and to obtain the best results, follow the
tips below:
When placing items inside the
refrigerator, make sure there is
sufficient air circulation.
Pay attention to the maximum
height when placing food on the
top shelf of the refrigerator (fig.
on the right).
More items in the refrigerated,
longer the door kept open,
higher energy consumption.
To limit the loss in the device
efficiency, reduce the door
opening time to the minimum.
Also, do not open the door too
frequently.
Do not place warm or hot foods
in the refrigerator counter.
Placing of still uncooled foods
may impair the device
efficiency and causethe already
cooled articles to spoil faster.
CAUTION!
Placing the stored products incorrectly
may cause the device malfunction!
Store only packaged foods or food in relevant packaging in the refrigerator.
Do not store bananas in the refrigerator because this type of fruit is low temperature
sensitive.
Store food products with distinctive odour, such as fresh fish, foie gras, cheese in air-
tight containers.
In case of power failure keep the door closed to avoid cold air loss.
The refrigerator should not be without power supply for longer than 10 minutes.

- 39 -
Unused for longer time
When the device is not be used for a longer time, follow the instructions below:
Switch the device off with the main switch and disconnect from the power supply.
Clean the device and the surrounding area according to the instructions in section 6
“Cleaning and maintenance” .
Perform all maintenance works.
Leave the refrigerator door open to avoid mould and/or unpleasant odour formation.
6. Cleaning and maintenance
WARNING!
When cleaning, disconnect the device from the socket
(pull the plug).
The device is not suited for direct washing via water jets!
Protect the device from water penetration.
CAUTION!
Never use hot water to clean the device!
Never use aggressive cleaning agents, such as scouring powders, alcohol or
solvent based, which may damage the surface of the device.
To clean the stainless steel, do not use iron wool or iron brush as they may
leave iron particles on the surface that form rust in result of oxidation.
oClean the device regularly.
oRemove all food and beverages from the device and temporarily place them in a
cool place.
oRemove the grids from the device and clean with a soft cloth and a mild cleaning
agent.

- 40 -
oThoroughly wipe the external and internal surfaces of the device. Use warm water,
soft cloth and mild cleaning agent for cleaning.
oClean the door seal with a soft cloth soaked in warm water without using a
cleaning agent.
oFinally, thoroughly dry the cleaned surfaces and grids.
oRegularly remove dust and lint from the rear wall of the device with a soft brush or
dust brush.
Maintenance
CAUTION!
Unclean condenser impairs the device operation and increases energy
consumption!
The listed maintenance works must be performed by a qualified professional.
-Cleaning the condenser with relevant tools (vacuum cleaner or soft brush);
-checking the electric installation;
-Check ofthermostats and sensors;
-check the door seal for tightness and replace if damaged:
-regularly clean the condensation water tray.
-check the telethermostat or control board and probes.

- 41 -
7. Possible Malfunctions
In case of malfunction, immediately disconnect the device from the power supply. Before
contacting the customer service department or vendor check the troubleshooting table
below.
Problem
Possible reason
Solution
Refrigeration unit
does not start
Defrosting terminated
The device will start after
3 minutes
The device has been
switched off with the
main switch
Switch the device on again,
a new start after 3 minutes
No power
Check the plugs, sockets,
fuses and power supply
Refrigeration unit
works continuosly,
but does not cool
sufficiently
Ambient temperature
too high.
Make sure there is sufficient
ventilation in the place of
installation
Soiled condenser
Condenser cleaning
The door is not closing
properly.
Check the door seal, clean if
necessary
Not enough coolant
Contact the service company.
Hot gas valve partly open
Contact the service company.
Condenser blower is
not working
Contact the service company.
Evaporator blower is
not working
Contact the service company.
Ice formation
inside the
evaporator
The device is not levelled.
Level with adjustable feet
Condensation water
drain pipe clogged /
blocked
Contact the service company.
Refrigeration unit
does not turn off
Probe broken
Contact the service company.
Thermostat broken.
Contact the service company.
Intense noise
made by the
device
Continuous vibrations
Check if there is contact between
the device and other objects, both
internal and external.