Bartscher KV6L User manual

KV6L
190076

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Technical Support Hotline: [phone]
www.bartscher.com
Version: 1.0
Date of preparation: 2019-10-18
EN

190076 1 / 18
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of signal words.....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended use............................................................................................6
1.4 Unintended use........................................................................................6
2General information.......................................................................................7
2.1 Liability and warranty...............................................................................7
2.2 Copyright protection.................................................................................7
2.3 Declaration of conformity.........................................................................7
3Transport, packaging and storage.................................................................8
3.1 Delivery check .........................................................................................8
3.2 Packaging................................................................................................8
3.3 Storage....................................................................................................8
4Technical data...............................................................................................9
4.1 Technical specifications...........................................................................9
4.2 List of components of the appliance.......................................................10
4.3 Functions of the appliance..................................................................... 11
5Installation and operation ............................................................................11
5.1 Installation..............................................................................................11
5.2 Operation............................................................................................... 12
6Cleaning ......................................................................................................14
6.1 Safety Instructions for cleaning..............................................................14
6.2 Cleaning.................................................................................................15
7Possible Malfunctions..................................................................................15
8Disposal....................................................................................................... 16

Safety
2 / 18 190076
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des Geräts u ndg ilt als wichtige Infor mationsquelle un dN achschlagewer k.Di e Kenntnis aller enthalt enenSic herheitshinw eiseu ndH andlungs anweisungen schafft die V oraussetzung f ürd as sichere und sac hgerechte Arbeite n mitd emG erät.D arüber hin aus müssen die für den Eins atzbereich des Geräts gelt enden örtlichen Un fallverhütungsvorsc hriften und allgemein en Sicherheitsb estimmungen eingehalt en werden. Diese Bedi enungsanleitung is t Bestandteil des Pro dukts und muss in u nmittelbarer Nähe des Ger äts für das In¬stallations-, Bedienungs-, Wartungs- und Reinigu ngspersonal jed erzeitz ugänglich auf¬b ewahrt werden. Wenn d as Gerät an eine dritte Pers on
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of signal words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.

Safety
190076 3 / 18
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.
•Always completely unwind the power cord.

Safety
4 / 18 190076
EN
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.
Incorrect operation of th e appliance may cause fire or explosion hazard d uet oig nition of its content.
Fire hazard / flammable materials hazard / explosion hazard!
•Do not use any electric devices in the appliance.
•Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
•Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
•In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
•Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
•In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
•Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
•Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
•All ventilation slots should not be obstructed during operation.
•Never attempt to damage cooling installation of the appliance.
Operating personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.

Safety
190076 5 / 18
EN
•The appliance may only be used when all connections are executed according
to rules of law in force.
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your
own.
•Do not introduce any changes in the appliance nor modify it.
•Do not drill hole in the appliance nor install any objects on it.
•Do not place any heavy objects on the appliance.

Safety
6 / 18 190076
EN
1.3 Intended use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–Chilling of milk for preparing coffee in a coffee machine.
1.4 Unintended use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
–Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives.
–Storing explosive materials, like sprays filled with flammable propellants.
–Storing pharmaceutical products or preserved blood.
–Storing live pets.

General information
190076 7 / 18
EN
2 General information
2.1 Liability and warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, packaging and storage
8 / 18 190076
EN
3 Transport, packaging and storage
3.1 Delivery check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical data
190076 9 / 18
EN
4 Technical data
4.1 Technical specifications
Name:
Milk refrigerator KV6L
Art. No.:
190076
Material:
Sheet steel, powder-coated
Inner material:
Plastic ABS
Inner dimensions, in mm:
160 x 125 x 280
Volume, in litres:
6
Temperature range, min.–max., in °C:
0 - 4
Coolant / g:
R600a / 12
Climate class:
3
Ambient temperature:
25
Power supply:
0,061 kW / 230 V / 50 Hz
Number of doors:
1
Dimensions (W x D x H), in mm:
225 x 460 x 452
Weight in kg:
12,4
We reserve the right to implement technical modifications!
Version / Characteristics
•Cooling: compressor, circulating air
•Temperature control: electronic, in 1°C increments
•Opening for milk hose:
–2 openings, left and right side of the appliance, Ø7 mm
•Automatic defrost function
•Evaporation of condensed water
•Insulation: cyclopentane
•Control: electronic
•Internal lighting
•Digital display
•Door type: leaf door
•Door hinge: right side
•LED lighting, may be switched separately

Technical data
10 / 18 190076
EN
•Direct milk suction via side openings of the appliance
4.2 List of components of the appliance
1. Control panel
2. Door
3. Feet (4x)
4. Housing
5. Ventilation slots
6. LED lighting
7. Openings for milk hose (2 pcs)

Installation and operation
190076 11 / 18
EN
4.3 Functions of the appliance
The appliance is suitable for chilling milk.
5 Installation and operation
5.1 Installation
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.
•Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
•Nie należy umieszcz ać urządzeni a w gorącym o toczeniu ani w pobliżu materiał ów łatwopaln ych.
•The appliance requir ess ufficient airflow for proper operation. Assure a minimum lateral cl earance of the appliance of 10 cm.
•DieÖ ffnungen am Gerät niemals abdecken o derbl ockieren.
•Leave at least 10 cm clearance from walls and other objects.
•The appliance should be installed only in rooms, in which ambient temperature
does not exceed 25°C.
•Do not position the appliance in high humidity locations. Air relative humidity
should not exceed 55 %.

Installation and operation
12 / 18 190076
EN
•Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
•In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
•The electric socket sho uldb e easily accessible so it is possible to quickly discon nectt he power cord whenn ecessary. The electric socket sho uldb e easily accessibl es oit is possible to quickly disco nnectt he power cord whenn ecessary. The electric socket sho uldb e easily accessible so it is pos sible toq uickly discon nectt he power cord whe nnec essary.
Power supply connection
•Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
•After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2 Operation
•Setzen Sie die Boden-A bdeckung in das Bec kenei n.T hec over acts as a spac erbet ween the heating element and left-o verf ood tray.
•Carefully insert the con nection box with the heating element at the back edge of th e appliance. A pin in botto mpar to ft hec onnecti onb ox must enter a hole in the main ap pliance. This way the con nection box is properly mounted.
Preparation of the appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 “Cleaning”.
2. Finally, dry the appliance and accessories thoroughly.
3. Close the appliance door.
4. Plug the appliance into a single grounded socket.
5. If needed, the temperature may be altered with digital temperature control
regulator buttons.

Installation and operation
190076 13 / 18
EN
Digital temperature regulator
8. SET button
9. LED lighting button
10.Digital temperature display
11.Temperature decrease button
12.Temperature increase button
Operation
1. Press and hold the SET button (8) for approximately 1 second.
The device switches to the settings mode.
2. Reduce the temperature with the arrow button (11) or increase the temperature
with the arrow button (12).
The indicator light flashes 8 times and stores the set value.
The appliance will be chilled to the set temperature.
3. When the appliance reaches the temperature, insert milk cartons.
The cooling compartment houses 3 standard size milk cartons.
Do not obstruct ventilation openings, to provide for air circulation and, in turn, a
good chilling effect.
4. Remove rubber plugs, which are put into milk hose openings, and put them
aside.
5. Slide one slim milk hose(approx. Ø 7
mm) into one of the openings.
6. Put one end of the hose into the milk
carton.
7. Put the other end into milk suction of a
coffee machine.
Right after the coffee machine is switched on, the milk will be sucked, provided it is
needed to prepare the beverage.

Cleaning
14 / 18 190076
EN
8. Disconnect the appliance from mains power supply if it is not used any more.
Switching lighting ON/OFF
The appliance is equipped with LED lighting. It is located in internal compartment
ceiling.
In any case, if switching the LED lighting ON is required, press the LED lighting
button (9).
Automatic defrosting
The appliance is provided with the automatic defrosting function. Condensed water
is removed to a plastic tray under the appliance. Hot gas tube is laid in the tray; it is
covered with protective finish coating and thus protected against corrosion. As a
rule, the defrosting function is activated every 8 hours.
6 Cleaning
6.1 Safety Instructions for cleaning
•Before cleaning, disconnect the appliance from the power supply.
•Leave the appliance to cool down completely.
•Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.

Possible Malfunctions
190076 15 / 18
EN
6.2 Cleaning
1. At the end of a working day clean the appliance thoroughly.
2. Remove all objects from the appliance.
3. Clean the internal compartment with warm water and soft cloth or sponge. Use
mild cleaning agent if required.
4. Wipe the washed surfaces with a cloth moistened in clean water.
5. Wipe the appliance housing and door with frame with a soft, moistened cloth.
6. Finally, dry thoroughly all washed surfaces.
7. Leave the door open for the appliance to dry completely.
8. The condenser should be cleaned at least once a month with a vacuum cleaner
or a brush, to remove the built-up dust.
9. To clean the condenser, remove sheet metal cover at the rear wall of the
appliance.
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
Error
Possible Cause
Solution
The appliance does
not start.
No power.
Check the plug, sockets and
fuses.
The appliance does
not chill sufficiently.
Damaged thermostat.
Contact the service company.
The door is not closing
properly.
Check the door seal. Clean it if
necessary.
Obstructed ventilation
openings.
Check the ventilation openings.
Contaminated
condenser.
Clean the condenser.

Disposal
16 / 18 190076
EN
Error
Possible Cause
Solution
The appliance
operates loudly.
The appliance is not
levelled.
Check if the appliance is
levelled.
Constant vibrations.
Check if the appliance does not
come in contact with any
object, both inside and outside.
The following phenomena are not malfunctions:
1. During normal operation, a sound of water flowing is heard. This is a sound of
coolant flowing through the installation.
8 Disposal
Electrical appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.