Bartuf Flexi News B001765 User manual

Assembly Instructions
Flexi-News™ cross category
1. 2. 3.
4.
First, take base (A) and ensure brakes are
applied to the two castors that have them.
Braked castors are at opposite corners of
base.
With the base locked in place, drop the body
panel (B) into the base (A) as shown above.
Next secure the body panel (B) in place
with x4 thumb screws (F). Screw the fixings
through holes in side of base and through
body panel.
5. 6.
Repeat steps 4 and 5 for the second
confectionery shelf (C). Next install the
100mm shelf (D) above the two
confectionery shelves (C) as shown.
Next take the first of the confectionery shelves (C).
Locate the slots on the sides of the shelf with the
studs on the body panel (B).
Guide the slots on the sides of the shelf onto the
metal studs on the body (B). Push down until the
shelf ‘snaps’ into place.
Tel: [phone] Fax: [phone] email: [email protected] web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
x1
x1
x1
x1
x2
D
C
A
B
F
x4
C
C
PUSH
DOWN
Flexi News™
Cross category single
B001765

Guide the slots on the sides of the shelf (D) onto
the metal studs on the body panel (B). Push down
and pull towards the front until the shelf ‘snaps’
into place.
Finally install the 140mm shelf (E) onto the top set
of metal studs on the body panel (B). See step 7
for fixing guide.
The assembly is now complete.
7. 8. 9.
E
Tel: [phone] Fax: [phone] email: [email protected] web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
DB
B
D
i.PUSH
DOWN
ii.PULL
DOWN