Installation Manual
BEAM.NODE/LINK
© 2021
basalte v1.0
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
Model No. 0730-01 Beam.node (= black)
0730-04 Beam.link (= white)
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
Description
Basalte Beam is a dedicated wireless mesh network that Basalte wireless devices (e.g. Basalte Miro remote) use to
communicate with our Core servers.
Connect the Beam.link (white) to Core S4 to create a Beam network.
Core Plus and Core Mini have Beam.link already built in.
Use the Beam.node (black) to extend your Beam mesh network.
basalte bv | fraterstraat 37B | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | info@basalte.be
Technical data
Beam.node input power: 5V (micro USB) or 24V, 0.5W
Ambient temperature:
Operation: -5°C to 45°C
Storage: -15°C to 55°C
Transport: -15°C to 55°C
Max. humidity: 93% relative humidity, no moisture
condensation
Protection class: II
Type of protection: IP 20
Certification: CE
0730-01 0730-04
How to start up
Prepare your Core server for Beam
• Core S4 - connect Beam.link with USB
• Core Plus and Core Mini have built-in Beam.link, make sure antenna is mounted
Open your Basalte Home project in Basalte Studio, enable Basalte Beam in the Beam tab and push to server.
For more information, please refer to basalte.world.
0790-04
Core S4
0730-04
Beam Link
0790-05
Core Mini USB
+ +
0731-03
Miro Remote
0730-02-XX
Miro base
0730-01
Beam Node
( * ) Distance between nodes +/- 10m. Broadcast range will depend on environmental conditions and obstructions.
0731-03
Miro Remote
0730-02-XX
Miro base
0730-01
Beam Node
