Batavia POWERPAC 1212 User manual

POWERPAC 1212
USER GUIDE

heybata.com
WHATS IN THE BOX
PowerPac Solar Charge
Cable
AC chargerUser manual
sa[email protected]

heybata.com
WHATS IN THE BOX GLOSSARY
The following terms are used in this document to indicate various levels of potential harm
that may be caused by improper operation.
NOTICE
The instructions, if not properly followed, may result in property damage and minor physical
damage.
WARNING
The instructions, if not properly followed, may result in property damage, major accident
and serious injury.
Read the ENTIRE user manual to be familiar with the features of this product before operating.
Failure to operate the product correctly may result in damage to the product or personal
property and cause serious injury. Batting Cages Incorporated will not assume any legal
responsibility. DO NOT use the product with incompatible components or alter the product
in any way without following the instructions provided by BATA. Otherwise, you cannot get
aer-sales service from BATA under warranty condition. These Safety Guidelines include
instructions for safety, operation and maintenance. It is important to read and follow all the
instructions and warnings in the user manual before assembly, setup or use the product.
1. Keep PowerPac and the accessories dry and do not expose them to high heat.
2. Never disassemble, puncture, shock, crash, or incinerate the product or the accessories.
3. Recycle and dispose of PowerPac in accordance with the local regulations.
4. Pay attention to safety when handling the PowerPac.
5. People with disabilities or children should use the machine under the protection of the
supervisor.
sa[email protected]

heybata.com
PRODUCT SAFETY GUIDELINESPRODUCT SAFETY GUIDELINES
Improper use may result in re, property damage or personal injury. Make sure
to use the product according to the following safety rules and guidelines.
Product use:
1. Do not expose PowerPac to any liquid. Keep the PowerPac away from rain or any liquid. Do not drop the
PowerPac into water. If the battery in the PowerPac comes into contact with water, it may cause chemical
decomposition of the battery. This may cause the battery to catch re or explode.
2. Never use or charge swollen, leaky, or damaged batteries. If your battery is abnormal, contact BATA support
or a BATA authorized dealer for further assistance.
3. Never install or remove a battery from the PowerPac when it is turned on.
4. Never disassemble or pierce the product in any way. Otherwise, it may leak, catch on re, or explode.
5. DO NOT use the product if it was involved in a crash or a heavy bump.
6. Do not attempt to open or tamper with the internal wiring of the unit. This will void any warranty claims.
7. If the product falls into the water during use, take the product out immediately and put it in a safe and
open area. Keep a safe distance from it until it is completely dry. Never use it again and dispose it properly
as described in the Battery Disposal section below.
8. Do not allow pins, wires or other metal pieces to insert to the device case, outlets or controls. Metal pieces
may short circuit the product causing a re.
9. Avoid collision. DO NOT place heavy objects next tothe unit so that a collision may occur rupturing the
unit’s case.
WARNING Product Charging
1. Always the use BATA provided charger. BATA takes no responsibility for any damage caused by using non-
BATA charger.
2. When charging, please place the product on the ground away from any ammable or combustible
materials. To prevent accidents, never leave the PowerPac in an area where it can be tampered with by an
untrained individual or falling object, water, etc.
3. The PowerPac’s temperature may exceed the charging temperature range of -4ºF to 140ºF (-20 to 60°C)
during long heavy loads. DO NOT charge the PowerPac immediately aer a long heavy load (or in any other
situation)until it cools down to room temperature.
[email protected]

heybata.com
Product Storage and Transportation:
1. Keep the product out of the reach of children.
2. If a low-battery warning appears, charge the battery before storing it. Long-term storage in an uncharged
state may cause damage to the PowerPac’s batteries. The batteries will enter hibernation mode if the unit is
depleted and then stored for a long time. Recharging the product can bring the battery out of hibernation,
but storage in hibernation mode will damage the batteries.
3. DO NOT store the product near a heat source, such as a car in direct sunlight, a re source, or a heating
stove.
4. Store the product in dry environments. DO NOT place the product where it may contact with water.
5. Never transport a product with a battery power level higher than 50%. Follow all applicable ground and air
transportation regulations. Do not ship unless certied under the applicable ground or air (e.g. DOT (USA),
NFMTC (Canada), IATA (Intl. Air)) laws and under contract for hazmat shipping with your shipper of choice.
Battery Disposal:
1. Dispose of the product at a site approved for lithium ion battery recycling or disposa only aer a complete
discharge. Batteries are hazardous chemicals. Please strictly follow your local regulations regarding
battery disposal. Only dispose of the PowerPac in a location that accepts Lithium Batteries and DO NOT
dispose of it in general garbage.
2. Dispose of the product immediately if it cannot be powered on aer over-discharging.
Product Maintenance:
1. Never store the product in environments below -4° F (-20°C) or above 140° F (60°C).
2. Battery life may be reduced if not used for a long time.
3. Fully charge and discharge the battery at least once every 3 months to maintain battery health.
Travel Notice:
It is forbidden to carry lithium batteries and equipment with a capacity greater than 160Wh on airplane due to
the regulation, THAT INCLUDES THIS UNIT.
WARNING:
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
PRODUCT SAFETY GUIDELINESPRODUCT SAFETY GUIDELINES
[email protected]

heybata.com
POWERPAC USE GUIDE
INTRODUCTION 7
FEATURES 8
LCD DISPLAY 12
SOLAR PANEL CONNECTION 13
TECHNICAL SPECIFICATIONS 14
HOW TO RECHARGE 16
FAQs 16
POWERPAC CONTINUOUS USE 18
PRODUCT IMAGES 19
[email protected]

heybata.com
NOTICE:
Please note:
To turn ON/OFF PowerPac, you need to PRESS & HOLD the Power Button. To turn on the AC power outlet,
you need to PRESS & HOLD the AC Button aer turning on PowerPac. This is designed purposefully: it will
save the battery life, so that your PowerPac’s power is available when you need it.
Battery Maintenance
Get to know your PowerPac. Follow this step-by-step introduction to each of PowerPac’s ports, buttons,
display screens and more.
Technical Specications
Understanding the specs that make PowerPac such a cutting-edge product.
How to Charge PowerPac
Everything you need to know about recharging your PowerPac via AC charger, solar charge cable.
FAQs
Answers to you some of the most important questions about how to take care of your PowerPac, store your
PowerPac, and safely use your PowerPac.
What’s in the Box:
What is included in your purchase. If your purchase does not include these items, please contact us at
INTRODUCTION
NOTICE:
Please note:
To turn ON/OFF PowerPac, you need to PRESS & HOLD the Power Button. To turn on the AC power outlet,
you need to PRESS & HOLD the AC Button aer turning on PowerPac. This is designed purposefully: it will
save the battery life, so that your PowerPac’s power is available when you need it.
Battery Maintenance
Get to know your PowerPac. Follow this step-by-step introduction to each of PowerPac’s ports, buttons,
display screens and more.
Technical Specications
Understanding the specs that make PowerPac such a cutting-edge product.
How to Charge PowerPac
Everything you need to know about recharging your PowerPac via AC charger, solar charge cable.
FAQs
Answers to you some of the most important questions about how to take care of your PowerPac, store your
PowerPac, and safely use your PowerPac.
What’s in the Box:
What is included in your purchase. If your purchase does not include these items, please contact us at
www.heybata.com
sale[email protected]

heybata.com
FEATURES
sa[email protected]

heybata.com
1. LCD Display
Displays the various conditions of the product. The screen will turn of aer 5 mins. You can turn it on by
pressing ON/OFF button.
2. 5V USB Output Ports
Charge a wide array of devices such as your iPhone, tablet, speakers, or anything that needs to be charged
through a USB-A Port. The USB Output icon will appear on LCD Display when a USB port is in use.
3. Fast Charge QC 3.0 Output Ports
Charge a wide array of devices such as your iPhone, tablet, speakers, or anything that needs to be charged
through a USB Port. The USB Output icon will appear on LCD Display when a USB port is in use. Fast charge
enabled devices can be charged at a maximum speed of 18W. If your device does not support fast charging,
the device will charge in regular speed.
4. Fast Charge Type-C Output Ports
Devices that charge through a Type-C port, such as a MacBook Pro, Android phone, etc. can be charged by
the PowerPac Type-C port. The Type-C Output icon will appear on LCD Display when a Type-C port is in use.
Fast charge enabled devices can be charged at a maximum speed of 30W. If your device does not support fast
charging, the device will charge in regular speed.
5. Fast Charge Type-C Output Ports
Devices that charge through a Type-C port, such as a MacBook Pro, Android phone, or other devices can be
charged by the PowerPac Type-C port. The Type-C Output icon will appear on LCD display when a Type-C port
is in use. Fast charge enabled devices can be charged at a maximum speed of 60W. If your device does not
support fast charging, the device will charge in regular speed.
6. DC-12V Output Ports
Devices that charge through a DC-12V port, such as a DC12V LED lights and a DC12V Refrigerator, can be
charged through this output. The DC Output icon will appear on the LCD Display when a DC port is in use.
Devices can be charged at a maximum DC12V 7A.
7. Power Switch
Press and short the power button to turn the PowerPac on or o. When the PowerPac is turned on the LCD
Display Screen will light up. To turn the LCD Display Screen ON/OFF and keep PowerPac working, press the
Power button. The corresponding power load icon will automatically light up when the PowerPac senses any
of the output.
FEATURES
sa[email protected]

heybata.com
FEATURES
[email protected]